ISO 13544 Anesthetic and Respiratory Equipment - Nebulization Systems and Components

EUROLAB laboratory provides testing and compliance services within the scope of ISO 13544 standard. Developed by the International Standards Organization (ISO), the ISO 13544 standard specifies requirements for the safety, performance and testing of general purpose nebulization systems intended for the delivery of liquids to humans via the respiratory system in the form of a continuous or breath-actuated aerosol.

Nebulizers are widely used to deliver drugs in aerosol form to humans through the respiratory system. These drugs may be in the form of a solution, suspension, or emulsion. Aerosol inhalation is the preferred route of administration for some drugs. Some drugs are intended for the treatment of systemic diseases, and other drugs are intended to treat respiratory diseases.

To achieve the intended treatment, aerosol particles may need to be deposited in certain parts of the respiratory tract. Particles of different sizes tend to accumulate in different parts of the respiratory system; therefore the performance profile and intended use of the nebulizer should be defined by the manufacturer and stated in the accompanying documentation. Nebulizers are also used for diagnostic purposes using radioisotopes and for lung challenge tests and delivery of vaccines.

This International Standard is based on the European Standard EN 13544-1. This International Standard has been developed to cover "general purpose" nebulizers. It has been specifically written to ensure that the results of the various tests declared by the manufacturer are meaningful to nebulizer users and buyers.

The purposes of this International Standard are to provide:

The suitability of the nebulizers for the intended use described by the manufacturer;
Safety, especially for electrically powered nebulizers;
Compatibility between the materials of the components and the dispersed liquid;
Biocompatibility of materials of components in contact with the human body.

This International Standard applies, for example, to compressors, pipeline systems, cylinders, etc. gas-powered nebulizers and electrically-operated nebulizers [eg. rotating disc, ultrasonic, vibrating mesh (active and passive) and capillary devices] or manually operated nebulizers.

This International Standard does not apply to devices for nasal deposition. This International Standard does not apply to devices for humidification or hydration by supplying water in aerosol form only. This International Standard does not apply to drug-specific nebulizers (for example, metered dose inhalers, metered liquid inhalers, dry powder inhalers and their components).

Among the services provided by our organization within the framework of material testing services, there are also ISO 13544 standard tests. Do not hesitate to contact our laboratory EUROLAB for your testing and certification requests.

Material Testing

ISO 13544 Anesthetic and Respiratory Equipment - Nebulization Systems and Components
Advanced Composites Test
Arc Resistance Test
Dielectric Constant and Dispersion Factor Test
Differential Scanning Calorimetry Test
Dynamic Mechanical Analysis
Gravelometer Test
Plastic, Polymer and Rubber Material Test
Thermo Gravimetric Analysis
Thermo Mechanical Analysis
Volume and Surface Resistance Test
Wetting Balance Test
Abrasion and Wear Tests
Aviation Fastener Test
FAA Flammability Test for Airplane Interiors
Composite Test
Steel Mold Qualification
Fastener, Screw and Bolt Tests
Foam Test
Fractography Service
Break Resistance Test
Fuels and Lubricants Test
Hardness Test
Material Properties Tests
Mechanical Testing
Metallurgical Test
Non-Metallic Material Error Test
Non-Metallic Mechanical Tests
Thermal Analysis
On-Site Metallographic Test and Analysis
Paint and Coating Test
Passivation Test
Polymer Matrix Composite Test
Radiographic Inspection
Stress Test Now
Residue Analysis
Stress Break and Creep Test
Tension and Stress Test
EN ISO 17892-10 Geotechnical Investigation - Test for Direct Shear
EN 29053 Acoustics - Materials for Acoustic Applications - Test for Determination of Airflow Resistance
DIN 55635-2019-05 Coating Materials - Cyclic Corrosion Test of Coating Systems on Materials and Components in Automotive Engineering
ISO 17892-11 Geotechnical Investigation and Tests - Standard Test for Permeability
EN 1366 Fire Resistance Tests
Plastic Product Analysis
EN 13322-1 Design and Manufacture of Portable and Refillable Welded Steel Gas Cylinders (Carbon Steel)
ASTM D4935-18 Standard Test Method for Measuring Electromagnetic Shielding Effectiveness of Planar Materials
EN ISO 527-2 Determination of Tensile Properties of Plastics, Test Conditions for Molding and Extrusion Plastics
EN/IEC 60112 Method for Determining Proof of Solid Insulation Materials and Comparative Tracking Indexes
UL 746C Test
SAE J1545 Instrumental Color Difference Measurement for Exterior Cladding, Textiles and Colored Flooring
EN 1071-4 Ceramic Tests
EN ISO 9220 Metallic Coating Analysis
Acid Resistance Tests
EN 206 Concrete Tests
ASTM D1003 Standard Tests for Haze and Light Transmittance of Clear Plastics
ISO 18080-1 Electrostatic Tests of Textile Fabrics
ISO 18080-2 Electrostatic Tendency Tests of Fabrics
MIL-PRF-81705 Barrier Materials ESD Performance Tests for Bags
ASTM G65 Standard Test Method for Measuring Wear Using Dry Sand or Rubber Wheel Apparatus
FKM (Viton) Fluorocarbon Gasket and Felt Tests
NFPA Fire Safety Tests
ASTM D 1053 Test Method for Flexible Polymers and Coated Fabrics
DIN 53504 Rubbers - Determination of Tensile Strength at Break, Tensile Stress at Yield, Elongation at Break and Tensile Values 鈥嬧€媔n a Tensile Test
EN 1021-1/2 Furniture - Standard for Evaluation of Flammability of Upholstered Furniture
EN 1075 Test Methods for Wooden Structures
EN 12722 Dry Temperature Resistance Tests
ISO 1431-1 Static and Dynamic Strain Testing
NFPA 20 Fire Pump and Equipment Selection Standard
UL 58 Steel Underground Tanks for Flammable and Combustible Liquids
ISO 1817 Rubber, Vulcanized and Thermoplastic - Effect of Liquids Test Standard
ISO 527-1/2 Test Method for Determining Tensile Properties of Plastic Materials
SAE J20R3 Test Standard for Blue Silicone Heat Hose
ASTM D3574 Standard Test Methods for Flexible Cellular Materials
ISO EN 846 Test Standard for Evaluation of the Effect of Microorganisms on Plastics
Thermal Stability Tests on Cosmetics and Finished Substances
UL 563 Test Standard for Safe Ice Makers
ISO 27668 Test Standard for Gel Ink Ballpoint Pens and Refills
ISIRI Republic of Iran Tests and Analysis
EN 13251 Test Standard for Geotextiles and Geotextile-Related Products
EN 13256 Test Standard for Geotextiles Used in the Construction of Tunnels and Underground Structures
EN 13349 Test Standard for Solid Coated Pre-Insulated Copper Pipes
EN 16511 Test Standard for Multi-Layer Modular Flooring (MMF) Panels
NFPA 701 Standard Fire Test Method for Flame Spread of Textiles and Films
IPC MF 150 Metal Foil Test Standard for Printed Cabling Applications
ISO 17235 Test Standard for Leather Softness
EN ISO 17225-2 Test Standard for Fuel Properties of Graded Wood Pellets
ISO 4589-3 Determination of Combustion Behavior with Oxygen Index for Plastics High Temperature Test Standard
ISO 16000-2 Sampling Strategy Test Standard for Indoor Air Formaldehyde
ISO 10534-1 Crane Requirements and Test Methods for the Transport of Persons Test Standard
ISO 10534-2 Acoustic - Determination of Sound Absorption Coefficient and Impedance in Impedance Tubes Test Standard
SAE J400 Test Standard for Chip Resistance of Surface Coatings
UNE EN 1022 Furniture - Seating Stability Test Standard
UNE EN 1728 Furniture - Test Standard for Determining Seating Strength and Durability
UN3373 P650 Guidelines for Packing and Transporting Biological Specimens by Road
TS EN 13718-1 Medical Vehicles and Equipment - Air Ambulances - Part 1: Features of Medical Devices Used in Air Ambulances
AATCC 16.2 Carbon-Arc Test Standard for Light Fastness
SAE J300 Test Standard for Engine Oil Viscosity Grades
AIS 140 GPS Device Level Functional, Performance and Endurance Test Standard
Anionic Active Substance Determination Test Standard
Cationic Active Substance Test Standard
ETSI EN 300 392 Terrestrial Trunk Radio Voice and Data Air Interface Test Standard
ETSI EN 300 384 Radio Broadcasting Systems; Very High Frequency (VHF), Frequency Modulated, Audio Broadcast Transmitters Test Standard
ISO 14125 Flexural Properties of Fiber Reinforced Plastic Composites Test Standard
ISO 175 Plastics - Test Standard for Determining the Effects of Immersion in Liquid Chemicals
ISO 6270-2 Determination of Moisture Resistance of Paints and Varnishes - Test Procedure for Exposure of Test Samples to Condensate Atmospheres
ISO 6270-1 Determination of Moisture Resistance of Paints and Varnishes - Test Standard for Unilateral Exposure of Test Samples to Condensation
Biodegradability Test
EN 12467 Fiber Cement Flat Sheets Product Specification Test Standard
ISO 180 Plastics 鈥 Determination of Izod Impact Strength
ISO 3651-2 Determination of Intergranular Corrosion Resistance of Stainless Steels, Ferritic, Austenitic and Ferritic Austenitic Stainless Steels Corrosion Test Standard in Environments Containing Sulfuric Acid
IEC EN 62115 Safety Standard for Electric Toys
ISO 4049 Dentistry - Test Standard for Polymer-Based Restorative Materials
IEC 60068-2-57 Vibration - Time history and Sine-Beat Test Method
ISO 10079-3 Medical Suction Equipment - Test Standard for Vacuum or Pressure Source Powered Suction Equipment
IEC 62471 Test Standard for LED Lighting Products
ASTM G154 Standard Practice for Operating Fluorescent Ultraviolet Lamp Apparatus for Exposure of Non-Metallic Materials
EN ISO 10545 Test Standards for Ceramic Tiles
EN 1931 Bitumen, Plastic and Rubber Sheets for Roof Waterproofing - Determination of Water Vapor Permeability Pr硏繫>狹Se*5# Q-g淺靂M攐perties
EN 50214 Test Standard for Flat Polyvinyl Chloride Sheathed Flexible Cables
ISO 11654 Acoustics - Sound Absorbers for Use in Buildings - Sound Absorption Rating Standard
ISO 4587 Adhesives - Determination of Tensile Lapse - Shear Strength of Rigid To Rigid Assemblies
EN 480 Additives for Concrete, Mortar and Mortar - Test Methods - Reference Concrete and Reference Mortar for Testing
ISO 7886-2 Disposable Sterile Hypodermic Syringes - Test Standard for Use with Power Operated Syringe Pumps
FAR 25.853 Flammability Requirements for Aircraft Seat Cushions
EN ISO 527-4 Test Standard for Tensile Properties of Isotropic and Orthotropic Fiber Reinforced Plastic Composites
EN 13706-2 Reinforced Plastic Composites - Specifications for Pultruded Profiles - Test Standard for Test Method and General Requirements
CSA Z94 Test Standard for Selection, Use and Care of Respirators
CSA Z662 Test Standard for Oil and Natural Gas Pipeline Systems
Security Code on CSA Z150 Mobile Cranes
EN ISO 14130 Fiber Reinforced Plastic Composites - Test Standard for Determination of Visible Interlayer Shear Strength by Short Beam Method
EN 12941 Respiratory Protective Devices - Power Assisted Filter Devices Used with Helmets or Helmets - Properties, Testing and Marking
AATCC TM130 Test Standard for Oily Stain Release Method
ISO 3231 Paints and Varnishes - Determination of Resistance to Humid Environments Containing Sulfur Dioxide
ISO 6488 Tobacco and Tobacco Products 鈥 Determination of Water Content 鈥 Karl Fischer Method
ISO 7253 Paints and Varnishes - Determination of Resistance to Neutral Salt Spray (Fog)
EN ISO 8130-8 Coating Powders - Test Standard for Evaluation of Storage Stability of Thermosetting Powders
ISO 3668 Paints and Varnishes - Visual Comparison of Color of Paints
ISO 29022 Dentistry - Adhesion - Notched Shear Bond Strength Test Standard
ISO 11979-4 Ophthalmic Implants - Intraocular Lenses - Labeling and Information Test Standard
ISO 11979-10 Ophthalmic Implants - Intraocular Lenses - Test Standard for Clinical Trials of Intraocular Lenses for Correction of Ametropia in Phakic Eyes
ISO TR 22979 Ophthalmic Implants - Intraocular Lenses - Test Standard for Evaluation of Clinical Research Need of Intraocular Lens Design Changes
ASTM F2083-12 Test Standard for Knee Replacement Prosthesis
ASTM F3140-17 Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements
ASTM F543-17 Standard Specification and Test Methods for Metallic Medical Bone Screws
ISO 7199 Cardiovascular Implants and Artificial Organs - Test Standard for Blood Gas Exchangers
ISO 25539-1 Cardiovascular Implants - Endovascular Devices - Test Standard for Endovascular Prosthesis
ISO 9917-2 Dentistry 鈥 Water-based cements 鈥 Test Standard for Resin Modified Cements
ISO 14801 Dentistry - Implants - Dynamic Loading Test Standard for Intrabony Dental Implants
ISO 22674 Dentistry - Metallic Materials for Fixed and Removable Restorations and Appliances
ISO 24234 Dentistry 鈥 Test Standard for Dental Amalgam
EN 12368 Traffic Control Equipment - Test Standard for Signal Heads
EN 61003-2 Industrial Process Control Systems - Instruments with Analog Inputs and Two- or Multi-Position Outputs Guidance for Inspection and Routine Testing
EN 61547 Equipment for General Lighting Purposes 鈥 EMC Immunity Requirements
ISO TS 11405 Dentistry - Adhesion Test Standard to Tooth Structure
EN 61000-4-2 Electromagnetic Compatibility (EMC) - Test and Measurement Techniques - Electrostatic Discharge Immunity Test
ISO 14708-3 Implants for Surgically-Active Implantable Medical Devices-Test Standard for Implantable Neurostimulators
ISO 14242-1 Implants for Surgery-Total Abrasion of Hip Joint Prostheses-Loading and Displacement Parameters for Abrasion Testing Machines and Relevant Environmental Conditions for Testing
ISO 14242-2 Implants for Surgery-Wear of Total Hip Joint Prostheses-Measurement Methods
ISO 14243-2 Implants for Surgery-Total Wear of Knee Joint Prostheses-Measurement Methods
EN 12667 Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Protected Hot Plate and Heat Flow Meter Methods
ISO 14243-3 Implants for Surgery-Total Wear of Knee Joint Prostheses-Displacement Controlled Abrasion Test Machines for Loading and Displacement Parameters and Relevant Environmental Conditions for Testing
ISO 8301 Thermal Insulation - Determination of Steady State Thermal Resistance and Related Properties
ISO 11135 Sterilization of Health Care Products-Ethylene Oxide-Requirements for the Development, Validation and Routine Control of a Sterilization Process for Medical Devices
ISO 9693 Dentistry - Compatibility Test Standard for Metal-Ceramic and Ceramic-Ceramic Systems
ASME PVHO-1 Safety Standard for Pressure Vessels for Human Use
ISO 5356-1 Test Standard for Anesthetic and Respiratory Equipment-Conical Connectors-Cones and Sockets
ISO 5356-2 Test Standard for Anesthetic and Respiratory Equipment, Conical Connectors, Screw Thread Weight-Bearing Connectors
ISO 5360 Anesthetic Vaporizers 鈥 Test Standard for Agent-Specific Filling Systems
ISO 8359 Oxygen Concentrators for Medical Use - Test Standard for Safety Requirements
EN 13967 Flexible Sheets for Waterproofing - Plastic and Rubber Moisture Resistant Sheets, Including Plastic and Rubber Base Tank Sheet
EN 13984 Flexible Sheets for Waterproofing - Plastic and Rubber Vapor Control Layers - Definitions and Properties
ASTM F981-04 Standard Practice for Evaluating the Compatibility of Biomaterials for Surgical Implants for the Effect of Materials on Muscle and Bone
UL 1642 Test Standard for Lithium Batteries
UL 2054 Test Standard for Lithium-Ion Batteries
IEC 62133-2 Test Standard for Lithium Polymer Batteries
UN/DOT 38.3 Transportation Test for Lithium Batteries
ISO 140-4 Measurement of Sound Insulation in Buildings and Structural Elements - Part 4: Field Measurements of Airborne Sound Insulation Between Rooms
ISO 456 Surfactants - Analysis of Soaps - Determination of Free Caustic Alkali
EN ISO 2871-1 Surfactants - Detergents - Determination of Cationic-Active Substance Content
EN ISO 2871-2 Surfactants - Detergents - Determination of Cationic-Active Content Content - Part 2: Low Molecular Mass Cationic-Active Substance
ISO 2271 Surfactants - Detergents - Determination of Anionic-Active Substance by Manual or Mechanical Direct Two-Phase Titration Procedure
ISO 457 Soaps - Determination of chloride content - Titrimetric method
ISO 10590 Building Construction - Sealants - Determination of Tensile Properties of Sealant at Retained Elongation After Immersion
ISO 10993-13 Biological Evaluation of Medical Devices - Identification and Quantification of Degradation Products from Polymeric Medical Devices
ISO 10993-14 Biological Evaluation of Medical Devices - Identification and Quantification of Ceramic Decay Products
ISO 10993-15 Biological Evaluation of Medical Devices - Identification and Quantification of Decomposition Products from Metals and Alloys
ISO 10993-17 Biological Evaluation of Medical Devices - Test Standard for Determining Permissible Limits for Filtrate Substances
EN 15426 Waxes - Specification for Sooting Behavior
ISO 10993-18 Biological Evaluation of Medical Devices - Test Standard for Chemical Characterization of Medical Device Materials within a Risk Management Process
ISO 5840-1 Cardiovascular Implants - Heart Valve Prosthesis - Test Standard for General Requirements
EN 15493 Candles - Fire Safety Specification
ISO 5840-2 Cardiovascular implants - Heart valve prostheses - Test Standard for Surgically Implanted Heart Valve Replacements
ISO 5840-3 Cardiovascular Implants - Heart Valve Prostheses - Test Standard for Heart Valve Replacements Implanted by Transcatheter Techniques
EN 15494 Candles - Product Safety Labels Specification
ISO 5841-3 Implants for Surgery - Pacemakers - Test Standard for Low Profile Connectors for Implantable Pacemakers
General Quality and Inspection Specifications for RAL GZ 041 Candles
ISO 7198 Cardiovascular Implants and Extracorporeal Systems - Vascular Prostheses - Test Standard for Tubular Vessel Grafts and Vessel Patches
ISO 10555-1 Intravenous Catheters - Sterile and Disposable Catheters - Test Standard for General Requirements
EN 14362-1 Textiles - Methods for the Determination of Certain Aromatic Amines Derived from Azo Colorants - Part 1: Detection of Use of Certain Azo Colorants Accessible with and without Removing Fibers
ISO 10555-3 Intravascular Catheters - Sterile and Disposable Catheters - Test Standard for Central Venous Catheters
EN ISO 3071 Textile 鈥 Test Standard for Determining the pH Value of Aqueous Essence
EN ISO 12945 Textiles - Determination of Pilling and Pilling Tendency on the Surface of Fabric - Pilling Box Method
ISO 10555-4 Intravenous Catheters - Sterile and Disposable Catheters - Test Standard for Balloon Dilatation Catheters
ISO 10555-5 Intravascular Catheters - Sterile and Disposable Catheters - Test Standard for Peripheral Catheters with Excessive Needle
ISO 11318 Cardiac Defibrillators - DF-1 Connector Kit for Implantable Defibrillators - Dimensions and Testing Requirements
EN ISO 9073-5 Textile - Test Methods for Nonwovens - Part 5: Determination of Resistance to Mechanical Penetration
ISO 14117 Active Implantable Medical Devices - Electromagnetic Compatibility - Implantable Pacemakers - EMC Test Protocols for Implantable Cardioverter Defibrillators and Cardiac Resynchronization Devices
ISO 14708-2 Implants for Surgery - Active Implantable Medical Devices - Test Standard for Pacemakers
ISO 14708-5 Implants for Surgery - Active Implantable Medical Devices - Test Standard for Circulatory Support Devices
EN 1860-2 Appliances, Solid Fuels and Fire Torches for Barbecue - Part 2: Barbecue Charcoal and Barbecue Charcoal Briquettes
ISO 14708-6 Surgical Implants - Active Implantable Medical Devices - Special Requirements for Active Implantable Medical Devices to Treat Tachyarrhythmia
EN ISO 11140-1 Sterilization of Healthcare Equipment - Chemical Indicators
IEC 60079-01 Electrical Apparatus for Explosive Gas Atmospheres - Part 1: Flameproof Enclosures - Test Method for Determining Maximum Experimental Safe Space
ISO 27186 Active Implantable Medical Devices - Quadrupole Connector System for Implantable Cardiac Rhythm Management Devices - Size and Testing Requirements
ISO 856 Peppermint Oil (Mentha x piperita L.) Specification
ISO 8302 Thermal Insulation - Determination of Steady-State Heat Resistance and Related Properties - First Edition of the Shielded Hot Plate Apparatus
EN 13163 Thermal Insulation Products for Buildings - Factory Made Expanded Polystyrene (EPS) Products
EN 13165 Thermal Insulation Products for Buildings - Factory Made Rigid Polyurethane Foam (PU) Products
ISO 11092 Textile - Physiological Effects - Measurement of Thermal and Suvapour Resistance at Steady State Conditions
EN 62087-1 Audio, Video and Related Equipment - General Standard for Determining Power Consumption
EN 62087-2 Audio, Video and Related Equipment - Determining Power Consumption - Part 2: Signals and Media
EN 62087-3 Audio, Video and Related Equipment - Determining Power Consumption - Part 3: Television Sets
EN 62087-4 Audio, Video and Related Equipment - Determining Power Consumption - Part 4: Video Recording Equipment
UL 746B Polymeric Materials - Requirements for Long-Term Property Evaluations
IEC 60216-1 Electrical insulating materials 鈥 Thermal endurance properties 鈥 Part 1: Aging Procedures and Evaluation of Test Results
IEC 60216-2 Electrical Insulation Materials - Thermal Endurance Properties - Part 2: Determination of Thermal Endurance Properties of Electrical Insulation Materials - Selection of Test Criteria
EN ISO 5801 Fans - Performance Test Using Standard Airlines
EN 2178 Non-Magnetic Coatings on Magnetic Surfaces - Measurement of Coating Thickness - Magnetic Method
ISO 4074 Natural Rubber Latex Male Condoms - Test Standard for Requirements and Test Methods
ISO 3107 Dentistry - Test Standard for Zinc Oxide-Eugenol and Zinc Oxide-Non-Eugenol Cements
ISO 6872 Dentistry - Test Standard for Ceramic Materials
ISO 6874 Dentistry - Test Standard for Polymer Based Pit and Fissure Sealers
ISO 6876 Test Standard for Dental Root Canal Sealants
ISO 6877 Dentistry 鈥 Test Standard for Endodontic Filling Materials
ISO 7405 Dentistry - Test Standard for Evaluation of Biocompatibility of Medical Devices Used in Dentistry
ISO 9693-1 Dentistry 鈥 Compatibility Test 鈥 Test Standard for Metal-Ceramic Systems
ISO 9917-1 Dentistry - Test Standard for Water-Based Cements - Powder-Liquid Acid-Based Cements
LM 79 Test Standard for Electrical and Photometric Measurements of Solid State Lighting Products
LM 82 Test Standard for Electrical and Photometric Measurements of Solid State Lighting Products
ISO 10271 Dentistry - Corrosion Test Methods for Metallic Materials
ISO 22794 Dentistry - Implantable Materials for Bone Filling and Augmentation in Oral and Maxillofacial Surgery - Test Standard for Contents of Technical File
ISO 22803 Dentistry - Membrane Materials for Guided Tissue Regeneration in Oral and Maxillofacial Surgery - Test Standard for Contents of Technical File
EN ISO 10140-4 Acoustics - Laboratory Measurement of Sound Insulation of Building Elements - Part 4: Measurement Procedures and Requirements
EN ISO 10140-3 Acoustics - Laboratory Measurement of Sound Insulation of Building Elements - Part 3: Measurement of Impact Sound Insulation
EN ISO 10140-2 Acoustics - Laboratory Measurement of Sound Insulation of Building Elements - Part 2: Measurement of Airborne Sound Insulation
EN 1627 Pedestrian Doors, Windows, Curtain wall, Grilles and Shutters - Burglar Resistance - Requirements and Classification
ISO 20200 Plastics - Determining the Degree of Degradation of Plastic Materials Under Simulated Composting Conditions in a Laboratory Scale Test
ISO 14582 Fasteners - Hexagon Socket Countersunk Head Screws, Test Standard for High Head
ISO 20136 Skin - Test Standard for Determination of Deterioration by Micro-Organisms
IEC 62133 Battery Safety Test
EN 62619 Safety Requirements for Secondary Lithium Batteries and Batteries for Use in Industrial Applications
IEC 60825-1 Safety of Laser Products - Test Standard for Equipment Classification and Requirements
HD 603 S1 Test Standard for Distribution Cables with Rated Voltage of 0,6-1 Kv
IEC CISPR 11 Industrial, Scientific, and Medical Equipment - Radio Frequency Distortion Characteristics - Test Standard for Limits and Methods of Measurement
ISO 14708-1 Implants for Surgery - Test Standard for Active Implantable Medical Devices
EN 50525-2-31 Electrical Cables - Low Voltage Energy Cables with Rated Voltages up to 450/750 V (Uo/U) (Uo/U) - Part 2-31: Cables for General Applications - Single Core Unsheathed Cables with Thermoplastic PVC Insulation
ASTM D4169-16 Standard Practice for Performance Testing of Shipping Containers and Systems
EN 50525-2-21 Electrical Cables - Low Voltage Energy Cables with Rated Voltages up to 450-750 V (U0-U) Cables for General Applications - Cross Linked Flexible Cables with Elastomeric Insulation
ASTM F1140-13 Standard Test Method for Internal Pressurization Failure Resistance of Unlimited Packages
EN 50575 Cable Compliance Test Standards
HD 626 S1 Air Distribution Cables with Rated Voltage Uo/U(Um): Test Standard for 0,6-1 (1,2) kV
ASTM F1929-98 Standard Test Method for Dye Penetration Detection of Leakages in Porous Medical Packages
ASTM F2096-11 Standard Test Method for Detection of Gross Leakage in Packaging by Internal Pressurization
ASTM F88-15 Standard Test Method for Sealing Strength of Flexible Barrier Materials
ISO 19833 Furniture - Mattress - Test Methods for Determining Stability, Strength and Durability
EN 13759 Furniture - Test Methods for Seating and Sofa Bed Working Mechanisms
IEC 60250 Recommended Methods for Determining the Permeability and Dielectric Dissipation Factor of Electrical Insulation Materials at Power, Sound and Radio Frequencies Including Counter Wavelengths
ISO 11193-1 Disposable Medical Examination Gloves - Test Standard for Gloves Made of Rubber Latex or Rubber Solution
ISO 11663 Dialysis Fluid Quality Test Requirements for Hemodialysis and Related Treatments
ISO 10282 Disposable Sterile Rubber Surgical Gloves - Test Standard for Properties
EN ISO 12945-2 Textile - Determination of Fabric's Tendency to Pilling, Pilling or Felting on the Surface Modified Martindale Method
ISO 9073-4 Nonwovens - Test Methods - Part 4: Determination of Tear Resistance by Trapezoid Procedure
ISO 13959 Test Standard for Water Requirements for Hemodialysis and Related Treatments
EN 1297 Flexible Sheets for Waterproofing - Bitumen, Plastic and Rubber Sheets for Roof Waterproofing - Artificial Aging Through Long Term Exposure to a Combination of UV Radiation, High Temperature and Water
ISO 13408-1 Aseptic Handling of Health Care Products - General Requirements
ISO 13408-2 Aseptic Handling of Health Care Products - Sterilization Filtration
ISO 13408-4 Aseptic Processing of Health Care Products - Cleaning-in-Place Technologies
ISO 13408-5 Aseptic Handling of Health Care Products - In-Site Sterilization
ISO 13408-6 Aseptic Processing of Health Care Products - Isolator Systems
ISO 13408-7 Aseptic Handling of Health Care Products - Alternative Treatments for Medical Devices and Combination Products
ISO 14644-1 Clean Rooms and Related Controlled Environments - Classification of Air Cleanliness by Particulate Concentration
ISO 14644-2 Cleanrooms and Related Controlled Environments - Monitoring to Provide Evidence of Air Cleanliness-Related Cleanroom Performance by Particulate Concentration
ISO 340 Conveyor Belts - Laboratory Scale Flammability Characteristics - Requirements and Test Method
ISO 14644-3 Test Methods for Clean Rooms and Related Controlled Environments
EN 1670 Building equipment - Corrosion Resistance - Requirements and Test Methods
Determination of Specific Surface Area of 鈥嬧€婼olids by EN 9277 Gas Adsorption 鈥 BET Method
ISO 6945 Rubber Hoses - Determination of Abrasion Resistance of Outer Cover
ISO 6722 Road Vehicles 鈥 Dimensions, Test Methods and Requirements for 60 V and 600 V Single Core Cables
EN ISO 9073-10 Textiles - Test Methods for Nonwovens - Production of Lint and Other Particles in Dry Condition
ISO 14644-4 Clean Rooms and Related Controlled Environments - Design, Construction and Commissioning
ISO 14644-5 Clean Rooms and Related Controlled Environments
BS 7209 Test Standard for Properties of Water Vapor Permeable Garment Fabrics
ISO 14644-6 Clean Rooms and Related Controlled Environments - Vocabulary
EN 61386-22 Ducting Systems for Cable Management 鈥鈥嬧€婸art 22 - Special Requirements 鈥 Flexible Ducting Systems
ISO 14644-7 Clean Rooms and Related Controlled Environments - Separation Devices (Clean Air Hoods, Glove Boxes, Isolators and Mini Environments)
ISO 18652-1 Biocompatibility Assessment of Respiratory Gas Routes in Healthcare Applications - Part 1: Evaluation and Testing in a Risk Management Process
ISO 14644-8 Clean Rooms and Related Controlled Environments - Classification of Air Cleanliness by Chemical Concentration (ACC)
ISO 14644-9 Clean Rooms and Related Controlled Environments - Classification of Surface Cleanliness by Particle Concentration
ISO 14644-10 Clean Rooms and Related Controlled Environments - Classification of Surface Cleanliness by Chemical Concentration
EN 15408 Solid Recovered Fuels - Methods for Determining Sulfur (S), Chlorine (Cl), Fluorine (F) and Bromine (Br) Content
AATCC TM163 Color Fastness - Dye Transfer in Warehouse - Fabric to Fabric
AATCC TM61 Color Fastness Against Laundering: Accelerated Test Standard
?Z_ &W漇拕蛭0惖P糅逃e-testleri/aatcc-tm82-agartilmis-pamuklu-kumastan-seluloz-dispersiyonlarinin-akiskanligi-icin-test-standardi/">AATCC TM82 Test Standard for Flowability of Cellulose Dispersions from Bleached Cotton Fabric
AATCC TM96 Test Standard for Dimensional Changes in Commercial Laundering of Woven and Knitted Fabrics Except Wool
AATCC TM101 Test Standard for Color Fastness to Bleaching with Hydrogen Peroxide
EN 50396 Non-Electrical Test Methods for Low Voltage Power Cables
EN ISO 4892-1 Plastics - Methods of Exposure to Laboratory Light Sources - Part 1: General Guidance
EN 15812 Polymer Modified Bituminous Thick Coatings for Waterproofing - Determination of Crack Bridging Capability
EN 15343 Plastic Recycling Traceability and Compliance and Evaluation of Recycled Content
ISO 14698-1 Clean Rooms and Related Controlled Environments - Biocontamination Control - General Principles and Methods
ISO 14698-2 Clean Rooms and Related Controlled Environments - Biocontamination Control - Evaluation and Interpretation of Biocontamination Data
ISO 17234-1 Leather - Test Standard for Determination of Certain Aromatics Obtained from Azo Colorants
ISO 17234-2 Leather - Chemical Tests for the Determination of Certain Azo Colorants in Dyed Leathers - Part 2: Determination of 4-Aminoazobenzene
ISO 17353 Water Quality - Determination of Selected Organotin Compounds - Gas Chromatographic Method
ISO 3377-2 Leather Physical and Mechanical Tests Determination of Tear Load Part 2: Double Edge Tear
ISO 2589 Leather - Physical and Mechanical tests - Thickness Determination
ISO 14801 Implants - Dynamic Loading Test for Intraosseous Dental Implants
EN 1062-3 Paints and Varnishes - Test Standard for Coating Materials and Coating Systems for Exterior Wall and Concrete
ISO 3826-1 Collapsible Plastic Containers for Human Blood and Blood Components - Test Standard for Conventional Containers
EN ISO 7783 Paints and Varnishes - Determination of Water Vapor Permeability Properties - Container Method
ISO 5832-1 Surgical Implants - Metallic Materials - Forged Stainless Steel Test Standard
EN ISO 9117-1 Paints and Varnishes - Drying Tests - Part 1: Determination of Full Curing Condition and Full Drying Time
ISO 5832-2 Surgical Implants - Metallic Materials - Unalloyed Titanium Test Standard
ISO 5832-3 Surgical Implants - Metallic Materials - Forged Titanium 6 - Aluminum 4 - Test Standard for Vanadium Alloy
ISO 5832-4 Test Standard for Surgical Implants - Metallic Materials - Cobalt - Chromium - Molybdenum Cast Alloy
EN ISO 11997-2 Paints and Varnishes - Determination of Resistance to Cyclic Corrosion Conditions Part 2: Wet (Salt Fog)/Dry/Moisture/UV Light
ISO 5832-9 Implants for Surgery - Test Standard for Metallic Materials
ISO 5832-11 Surgical Implants - Metallic Materials - Forged Titanium 6 - Aluminum 7 - Test Standard for Niobium Alloy
EN ISO 4624 Paints and Varnishes - Tensile Test for Adhesion
ISO 6474-2 Surgical Implants - Test Standard for Ceramic Materials
EN ISO 8130-3 Coating Powders 鈥 Part 3: Determination of Density by Liquid Displacement Pyrmeter
NFPA 1802 Test Standard for Two-Way, Portable RF Voice Communications Devices for Use by Emergency Service Personnel in a Danger Area
ISO 11979-2 Ophthalmic Implants - Intraocular Lenses - Optical Properties and Test Methods
NES M0132 Thermal Cycling Test Methods for Automotive Plastic Parts
ISO 11979-3 Ophthalmic Implants - Intraocular Lenses - Mechanical Properties and Test Methods
ISO 11979-5 Ophthalmic Implants - Intraocular Lenses - Biocompatibility Test Standard
ISO 11979-6 Ophthalmic Implants - Intraocular Lenses - Shelf Life and Shipping Stability Test
ISO 11979-7 Ophthalmic Implants - Intraocular Lenses - Clinical Trials of Intraocular Lenses for Correction of Aphakia
ISO 11979-8 Ophthalmic Implants - Intraocular Lenses - Test Standard for Basic Requirements
ISO 5832-12 Surgical Implants - Metallic Materials - Forged Cobalt - Chromium - Molybdenum Alloy
ISO 5834-2 Implants for Surgery - Ultra High Molecular Weight Polyethylene - Molded Forms
ISO 6474-1 Surgical Implants - Ceramic Materials - Standard Test for High Purity Alumina-Based Ceramic Materials
ISO 7153-1 Surgical Instruments - Materials - Standard Test for Metals
ISO 13402 Surgical and Dental Instruments - Determination of Resistance to Autoclaving, Corrosion and Thermal Exposure
ISO 13782 Surgical Implants - Metallic Materials - Unalloyed Tantalum for Surgical Implant Applications
ISO 11980 Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Guidelines for Clinical Research
ISO 15004-2 Ophthalmic Instruments - Basic Requirements and Test Methods - Mild Hazard Protection
ISO 18369-1 Ophthalmic Optics - Contact Lenses - Recommendations for Vocabulary, Classification System and Labeling Specifications
ISO 18369-2 Ophthalmic Optics - Contact Lenses - Standard Test for Tolerances
EN ISO 2431 Paints and Varnishes - Determination of Flow Time Using Flow Cups
ISO 18369-3 Ophthalmic Optics - Contact Lenses - Standard Test for Measurement Methods
ISO 18369-4 Ophthalmic Optics - Contact Lenses - Physicochemical Properties of Contact Lens Materials
EN ISO 2814 Paints and Varnishes 鈥 Comparison of Contrast Ratio (Hiding Power) of Paints of the Same Type and Color
IEC 80601-2-58 Medical Electrical Equipment - Specific Requirements for Basic Safety and Basic Performance of Lens Removal Devices and Vitrectomy Devices for Ophthalmic Surgery
ISO 5838-1 Implants for Surgery - Metallic Skeleton Pins and Wires - General Requirements
ISO 7206-4 Surgical Implants - Partial and Total Hip Joint Prostheses - Determination of Durability and Performance of Rooted Femoral Components
ISO 7206-6 Surgical Implants - Partial and Total Hip Joint Prostheses - Test of Endurance Properties of the Neck Region of Rooted Femur Components and Performance Requirements
ISO 9583 Surgical Implants - Non-Destructive Examination - Liquid Penetrant Examination of Metallic Surgical Implants
ISO 14243-1 Implants for Surgery - Wear of Total Knee Joint Prostheses - Loading and Displacement Parameters for Load-Controlled Abrasion Testing Machines and Relevant Environmental Conditions for Testing
ISO 80369-7 Small Hole Connectors for Liquids and Gases in Healthcare Applications - Part 7: Connectors for Intravascular or Hypodermic Applications
BS 3424 Test Methods for Coated Fabrics
ISO 11137-1 Sterilization of Health Care Products - Radiation - Requirements for the Development, Validation and Routine Control of a Sterilization Process for Medical Devices
EN 13583 Flexible Sheets for Waterproofing - Bitumen, Plastic and Rubber Sheets for Roof Waterproofing - Determination of Hail Strength
ISO 11137-2 Sterilization of Health Care Products - Radiation - Determination of Sterilization Dose
ISO 11137-3 Sterilization of Health Care Products - Radiation - Guidance on Dosimetric Aspects of Development, Validation and Routine Control
ISO 11138-2 Sterilization of Health Care Products - Biological Indicators - Biological Indicators for Ethylene Oxide Sterilization Processes
ISO 11138-3 Sterilization of Health Care Products - Biological Indicators - Biological Indicators for Moist Heat Sterilization Processes
DIN VDE 0250 Test Standards for Cables, Wires and Flexible Cables for Power Installations
ISO 17664 Handling of Health Care Products - Information to be Provided by the Medical Device Manufacturer for the Processing of Medical Devices
EN 20811 Textile - Determination of Resistance to Water Penetration - Hydrostatic Pressure Test
ISO 2812-2 Paints and Varnishes - Determination of Resistance to Liquids - Part 2: Immersion Method
DIN 52616 Testing of Thermal Insulation Materials - Determining Thermal Conductivity Using a Heat Flow Meter
ISO 4321 Washing Powders - Determination of Active Oxygen Content - Titrimetric Test Method
ISO 80369-20 Small Diameter Connectors for Liquids and Gases in Healthcare Applications
EN ISO 597-1 Furniture - Evaluation of Flammability of Mattresses and Upholstered Bed Bases Burning Cigarette for Ignition Source
EN ISO 597-2 Furniture - Evaluation of Flammability of Mattresses and Upholstered Bed Bases
ISO 21207 Accelerated Corrosion Tests Including Exposure to Corrosive Gases, Neutral Salt Spray and Alternative Drying
EN ISO 6579 Test Procedures for Hydraulic Brake Systems for Motor Vehicles, Including Electronic Control Functions
ISO 14704-1 Standard Test for Determination of Elasticity of Fabrics
IEC EN 62262 Degrees of Protection by Enclosures for Electrical Equipment Against External Mechanical Impacts
EN 513 Plastics - Poly(vinyl chloride) (PVC) Based Profiles - Determination of Resistance to Artificial Weather Conditions
EN 3-7 Portable Fire Extinguishers - Features, Performance Requirements and Test Methods
EN 3-8 Portable Fire Extinguishers - Construction for Extinguishers with Maximum Permissible Pressure 30 Bar or Less
EN 12016 Electromagnetic Compatibility - Product Family Standard for Elevators, Escalators and Escalators
EN 779 Particulate Air Filters for General Ventilation - Standard Test for Determining Filtration Performance
IEC 62055-31 Payment Systems - Part 31 - Special Requirements - Static Payment Meters for Active Energy
ISO 604 Plastics - Test Standard for Determination of Pressure Properties
ISO 1172 Prepregs, Molding Compounds and Laminates - Determination of Textile-Glass and Mineral Filling Content - Calcination Methods
EN ISO 62 Plastics - Determination of Water Absorption
EN 61591 Cooking Fume Extractors - Methods for Measuring Performance
EN 14354 Wood Based Panels - Wooden Floor Coverings
EN 438 High Pressure Decorative Laminates (HPL) - General Requirements for Sheets Based on Thermoset Resins
EN 14885 Chemical Disinfectants and Antiseptics - Application of European Standards for Chemical Disinfectants and Antiseptics
EN 16094 Laminate Flooring - Test Method for Determining Micro-Scratch Resistance
EN 573-3 Aluminum and Aluminum Alloys - Part 3: Test Method for Chemical Composition and Form of Forged Products
EN 573-2 Chemical Composition and Shape of Forged Products - Part 2: Chemical Symbol Based Marking System
EN 573-1 Chemical Composition and Shape of Forged Products - Part 1: Numerical Display System
ISO 11114-3 Gas Cylinders - Compatibility of Gaseous Cylinder and Valve Materials - Autogenous Ignition Test for Non-Metallic Materials in Oxygen Atmosphere
EN 1865-1 Patient Transport Equipment Used in Road Ambulances - Part 1: General Requirements for Stretcher Systems and Patient Transport Equipment
EN 1865-2 Patient Transport Equipment Used in Road Ambulances - Part 2: Power Assisted Stretcher
EN 1865-3 Patient Transport Equipment Used in Road Ambulances - Part 3: Heavy Duty Stretcher
EN 1865-5 Patient Transport Equipment Used in Road Ambulances - Part 5: Stretcher Support
ISO 16283-1 Acoustics - Field Measurement of Sound Insulation in Buildings and Structural Elements - Airborne Sound Insulation
ISO 16283-2 Acoustics - Field Measurement of Sound Insulation in Buildings and Structural Elements - Impact Sound Insulation
ISO 16283-3 Acoustics - Area Measurement of Sound Insulation in Buildings and Structural Elements - Facade Sound Insulation
SAE J2527 Performance-Based Standard for Accelerated Exposure of Automotive Exterior Materials Using a Controlled Radiation Xenon-Arc Apparatus
EN 16583 Heat Exchangers - Hydronic Room Fan Coil Units - Determination of Sound Power Level
ISO 179-1 Plastics - Determination of Charpy Impact Properties - Toolless Impact Test
ISO 179-2 Plastics - Determination of Charpy Impact Properties - Instrument Impact Test
EN 12254 Screens for Laser Workplaces - Safety Requirements and Tests
ISO 1811 Copper and Copper Alloys - Selection and Preparation of Samples for Chemical Analysis
ISO TS 16179 Shoe - Potentially Critical Substances in Shoe and Shoe Components - Determination of Organotin Compounds in Shoe Materials
EN 15777 Textiles - Test Method for Phthalates
EN 755 Aluminum and Aluminum Alloys, Extruded Bar-Bar, Pipe and Profiles - Technical Conditions for Inspection and Delivery Test Standards
UL 94 Prescreening Test Standard for Plastics for Fire Performance
EN 9626 Stainless Steel Hypodermic Tubes for the Manufacturing of Medical Devices - Requirements and Test Methods
ISO 3759 Textile - Preparation, Marking and Measurement of Fabric Samples and Garments in Tests for Determination of Size Change
AATCC 143 Test Method for Appearance of Garments and Other Textile Finishes After Home Washing
EN 29073-1 Test Methods for Nonwovens Part 1: Determination of Mass Per Unit Area
EN 29073-2 Test Methods for Nonwovens - Part 2: Determination of Thickness
AATCC 20 Fiber Analysis - Qualitative Test Method
EN 1773 Width and Length Determination Test Standard for Textiles
EN ISO 22610 Surgical Drapes, Gowns and Clean Air Garments Used as Medical Devices for Patients, Clinical Staff and Equipment - Test Method for Determining Resistance to Wet Bacterial Penetration
EN ISO 13938-1 Textiles - Burst Properties of Fabrics - Hydraulic Method for Determination of Burst Strength and Burst Swelling
ISO 6486-1 Food Contact Ceramicware, Glass Ceramicware and Glass Dinnerware - Lead and Cadmium Release Test method
ISO 7086-1 Food Contact Glass Containers - Release of Lead and Cadmium - Test Method
ISO 8391-1 C鼺D咪W}感决?鐸y軄嚒?冫eramic Container for Food Contact - Lead and Cadmium Release Test Method
EN 13130-1 Materials and products in contact with food - Limitations on Plastics - Test Methods for Determination of Specific Substances Transferring from Plastics to Foods and Counterfeit Foods and Selection of Exposure Conditions to Imitation Foods
EN ISO 6946 Building Components and Structural Elements - Thermal Resistance and Thermal Permeability - Calculation Methods
EN ISO 2409 Paints and Varnishes - Cross Cut Test Standard
EN ISO 6272-1 Paints and Varnishes - Rapid Deformation (impact resistance) Tests - Drop Weight Test, Standard Test for Large Area Indentation
ISO 20743 Textiles - Standard Test for Determination of Antibacterial Activity of Textile Products
ISO 13629-1 Textiles - Determination of Antifungal Activity of Textile Products - Luminescence Method
ISO 11737-2 Sterilization of Medical Devices - Microbiological Methods - Sterility Tests Performed in the Definition, Validation and Maintenance of a Sterilization Process
Test Method for Evaluation of EN 17272 Automatic Airborne Disinfection System
ISO 8013 Rubber and Vulcanized - Determination of Creep in Compression or Shear
EN 1939 Self-Adhesive Tape - Standard Test for Determining Adhesion Properties
EN 13795-1 Surgical Garments and Drapes - Part 1: General Requirements and Test Methods
ISO 14889 Ophthalmic Optics - Spectacle Lenses - Basic Requirements for Uncut Finished Lenses
EN 16122 Home and Outdoor Storage Furniture - Test Methods for Determining Strength, Durability and Stability
EN ISO 80369-6 Small Diameter Connectors for Liquids and Gases in Healthcare Applications - Connectors for Neuraxial Applications
EN ISO 80369-3 Small Diameter connectors for Liquids and Gases in Healthcare Applications - Connectors for Enteral Applications
EN 1730 Tables - Test Methods for Determining Stability, Strength and Durability
EN ISO 80369-2 Small Diameter Connectors for Liquids and Gases in Healthcare Applications - Connectors for Respiratory Applications
EN ISO 80369-7 Small Diameter Connectors for Liquids and Gases in Healthcare Applications - Connectors for Intravenous or Subcutaneous Applications
ISO 3233 Paints and Varnishes - Determination of the Volume of Non-Volatile Matter of Dry Coating Obtained from a Certain Volume of Liquid Coating Agent
ISO 16862 Paints and Varnishes - Standard Test for Evaluation of Sagging Resistance
EN 50618 Electrical Cables Test Standard for Photovoltaic Systems
ISO 717-2 Acoustics - Evaluation of Sound Insulation in Buildings and Structural Elements - Standard Test for Impact Sound Insulation
EN ISO 7172 Tables - Test Standard for Determination of Stability
EN 13150 Laboratory Benches in Educational Institutions - Dimensions, Safety and Durability Requirements
EN 10080 Steel for Concrete Reinforcement - Weldable Reinforcement Steel - General
EN 14877 Synthetic Surfaces for Outdoor Sports Fields - Standard Test for Properties
EN 868-8 Packaging for Sterilized Medical Devices - Reusable Sterilization Containers for Steam Sterilizers - Requirements and Test Methods
ISO 4582 Plastics - Determination of Changes in Color and Changes in Properties after Exposure to Glass Filtered Solar Radiation, Natural Weathering or Laboratory Radiation Sources
ISO 7173 Chairs and Stools - Determination of Strength and Durability
EN 50525-1 Electrical Cables - Low Voltage Power Cables with Nominal Voltages up to 450-750 V - General Requirements
EN 16139 Furniture - Strength, Durability and Safety - Requirements for Non-Household Seats
EN 14073-3 Office Furniture - Storage Furniture - Part 3: Determination of Stability and Strength of Structure
BS 7177 Test Method for Ignition Resistance Properties of Mattresses, Mattress Pads, Sofas and Bases
BS 5852 Flammability Test Standard for Upholstered Seats and Seats
ISO 10555-6 Intravascular Catheters - Sterile and Disposable Catheters - Subcutaneous Implanted Ports
EN 837-1 Pressure Gauges - Bourdon Tube Pressure Gauges - Dimensions, Metrology, Requirements and Testing
EN 60601-2-52 Medical Electrical Equipment - Special Requirements for Basic Safety and Basic Performance of Medical Beds
ISO 6860 Paints and Varnishes - Conical Mandrel Bend Test
Degrees of Protection Provided by EN 60529 Enclosures (IP Code)
ISO 6272-2 Paints and Varnishes - Rapid Deformation (Impact Resistance) Tests - Part 2: Drop Weight Test, Small Area Indentation
EN 50102 Degrees of Protection Provided by Electrical Equipment Enclosures Against External Mechanical Impacts (IK Code)
BS 874 Definitions of Thermal Insulation Terms and Determination of Thermal Insulation Properties
ISO 11357-3 Plastics - Differential Scanning Calorimetry (DSC) - Part 3: Determination of Melting and Crystallization Temperature and Enthalpy
EN ISO 1210 Plastics - Determination of Combustion Behavior of Horizontal and Vertical Samples in Contact with a Small Flame Ignition Source
ISO 1186-3 Materials and Objects in Contact with Foodstuffs - Plastics - Part 3: Test Methods for General Migration to Aqueous Food Similars by Complete Immersion
ISO 1186-4 Materials and Objects in Contact with Foodstuffs - Plastics - Part 4: Test Methods for General Migration by Cell into Olive Oil
ISO 8611 Pallets for Material Handling - General Requirements for Flat Pallets
EN/IEC 60335-2-7 Household and Similar Electrical Appliance Safety - Part 2-7: Special Rules for Washing Machines
16 CFR 1633 Mattress, Mattress Pads and Mattresses - Flammability Testing on Foundation Sets
16 CFR 1632 Flammability Test of Bed Pillows and Cushions
EN 15344 Plastics - Test Standard for Characterization of Polyethylene (PE) Recycled Products
ISO 5506 Soybean Products - Test Standard for Determination of Urease Activity
LV 112 Electrical Cables Test Standard for Motor Vehicles
ISO 5832-3 Implants for Surgery - Part 3: Forged Titanium 6 - Aluminum 4 - Vanadium Alloy
ISO 11075 Aircraft - Anti-Icing Anti-Icing Fluids - ISO Type I
ISO 14572 Road Vehicles - Round, Shielded and Unshielded 60V and 600V Multicore Sheathed Cables - Test Methods and Requirements for Basic and High Performance Cables
ISO 11078 Aircraft - Anti-Icing Anti-Icing Fluids - ISO Types II, III and IV
ISO 4649 Rubber, Vulcanized or Thermoplastic - Standard Test for Determination of Abrasion Resistance Using a Rotating Cylindrical Drum Device
EN 424 Flexible Floor Coverings - Determining the Effect of Simulated Movement of a Furniture Leg
ISO 8340 Building Construction - Sealants - Determination of Tensile Properties at Continuous Extension
ISO 7389 Building Construction - Joining Products - Determination of Elastic Recovery of Sealants
ISO 34-1 Rubber, Vulcanized or Thermoplastic - Determination of Tear Strength - Standard Test for Trousers, Angle and Crescent Test Pieces
EN ISO 17075-1 Leather - Chemical Determination of Chromium(VI) Content in Leather - Standard Test for Colorimetric Method
EN ISO 17694 Footwear - Test Methods for Uppers and Lining - Flexing Resistance
EN ISO 9073-6 Textiles - Test Methods for Nonwovens - Absorption
ISO 10545-14 Ceramic Tiles - Part 14: Determination of Resistance to Stains
ISO 18080-2 Test Methods for Evaluating the Electrostatic Tendency of Fabrics - Part 2: Test Method Using Rotary Mechanical Friction
EN 13501-1 Fire Classification of Building Products and Structural Elements - Classification Using Data from Reaction to Fire Tests
IEC 61914 Cable Clamps for Electrical Installations
Prescreening of Plastics for UL 94 Fire Performance
EN 50194 Household and Similar Appliance for Detection of Combustible Gases - Test Methods and Performance Characteristics
EN 50291 Gas Detectors - Electrical Devices for Carbon Monoxide Detection in Home Buildings - Test Methods and Performance Requirements
EN 54-17 Fire Detection and Fire Alarm Systems - Standard Test for Short Circuit Isolators
EN 16129 Test Standard for Automatic Switching Devices with a Maximum Regulated Pressure of 4 Bars and a Maximum Capacity of 150 kg/h
EN 54-18 Fire Detection and Fire Alarm Systems - Standard Test for Input-Output Devices
ETSI EN 301 893 5GHz RLAN - Harmonized Standard Covering Basic Requirements
EN 12952-1 General Requirements for Water Tube Boilers and Auxiliary Facilities
EN 1101 Geometric Product Properties (GPS) - Geometric Tolerances - Form, Direction, Position and Finish Tolerances
ISO 178 Plastics - Standard Test for Determination of Flexural Properties
ISO 527 Plastics - Standard Test for Determination of Tensile Properties
ISO 179 Plastics - Standard Test Method for Determination of Charpy Impact Properties
EN 131 Test Standards for Ladders
IEC 60093 Test Method for Volume Resistance and Surface Resistance of Solid Electrical Insulation Materials
ISO 1133 Plastics - Determination of Melt Mass Flow Rate (MFR) and Melt Volume Flow Rate (MVR) of Thermoplastics
IEC 60167 Test Method for Determining Insulation Resistance of Solid Insulation Materials
EN 10346 Technical Delivery Conditions for Continuous Hot-Dip Coated Steel Flat Products for Cold Forming
IEC 60243-1 Electrical Strength of Insulating Materials - Test Methods - Tests at Network Frequencies
CPAI 84 Flammability Test Standard for Camping Tents
ISO 37 Standard Test for Determination of Rubber, Vulcanized or Thermoplastic - Tensile Stress - Strain Properties
ISO 17707 Footwear - Test Methods for Outsoles - Flex Resistance
ISO 48 Rubber, Vulcanized or Thermoplastic - Standard Test for Determination of Hardness
ISO 20695 Enteral Feeding Systems - Design and Test
ISO 868 Plastics and Ebonite - Determination of Indent Hardness Using a Durometer
IEC/EN 60544-2 Effects of Ionizing Radiation on Insulating Materials - Part 2: Irradiation Test Procedures
ISO 815 Rubber, Vulcanized or Thermoplastic - Determination of Compression Set - At Ambient or High Temperatures
ISO 15779 Condensed Aerosol Fire Suppression Systems - Requirements and Test Methods for Components and System Design, Installation and Maintenance
EN 480-8 Additives for Concrete, Mortar and Mortar - Test Methods - Part 8: Determination of Conventional Dry Material Content
EN 480-10 Additives for Concrete, Mortar and Mortar - Test Methods - Part 10: Determination of Water-Soluble Chloride Content
EN 12310-1 Flexible Sheets for Waterproofing - Part 1: Bitumen Sheets for Waterproofing - Determination of Tear Resistance
ISO 898-2 Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel Nuts with Specified Property Classes - Coarse Thread and Fine Pitch Thread
ISO 15360-2 Recycled Pulps - Estimation of Adhesives and Plastics - Image Analysis Method
DIN 67510-1 Phosphorescent Pigments and Products - Part 1: Measurement and Marking at the Manufacturer
ISO 8317 Child Resistant Packaging - Requirements and Test Procedures for Reclosable Packages
ISO 17398 Safety Colors and Safety Signs - Classification, Performance and Durability of Safety Signs
ISO 15360-1 Recycled Pulps - Estimation of Adhesives and Plastics - Visual method
EN ISO 10140-1 Laboratory Measurement of Sound Insulation of Structural Elements - Code of Practice for Specific Products
IEC/EN 60544-4 Determination of the Effects of Ionizing Radiation in Electrical Insulating Materials - Part 4: Classification System for Service in Radiation Environments
ISO 2411 Rubber or Plastic Coated Fabrics - Standard Test for Determination of Coating Adhesion
EN 13706-1 Reinforced Plastic Composites - Specifications for Pultrude Profiles
ISO 17226 Leather - Chemical Determination of Formaldehyde Content - Method Using High Performance Liquid Chromatography
EN 13706-3 Reinforced Plastic Composites - Specifications for Pultruded Profiles - Part 3: Special Requirements
ISO 11640 Leather - Color Fastness Tests - Color Fastness Against Back and forth Rub Cycles
EN 13126 Building Hardware - Requirements for Windows and Door Height Window Fittings
EN ISO 12944-6 Corrosion Protection of Steel Structures with Protective Paint Systems - Part 6: Laboratory Performance Test Methods
ISO 9197 Paper, Cardboard and Pulp - Standard Test for Determination of Water-Soluble Chlorides
EN ISO 9227 Corrosion Tests in Artificial Atmospheres - Salt Spray Tests
EN 13795-3 Surgical Drapes, Gowns and Clean Air Garments Used as Medical Devices for Patients, Clinical Staff and Equipment - Performance Requirements and Performance Levels
BS 7176 Fire Testing on Upholstered Furniture for Outdoor Seats
IEC 60238 Test Standard for Edison Screw Holders
BS 5430-2 Periodic Inspection, Testing and Maintenance of Portable Gas Containers (Excluding Dissolved Acetylene Containers) Specification for Welded Steel Containers with Water Capacity from 0,5 L to 150 L
EN 13381-8 Reactive Protection Test Methods Applied to Steel Elements to Determine the Contribution of Structural Elements to Fire Resistance
EN ISO 10077-2 Thermal Performance of Windows, Doors and Shutters - Part 2: Numerical Method for Frames
EN ISO 10077-1 Thermal Performance of Windows, Doors and Shutters - Calculation of Thermal Transmittance
EN 14351-1 Product Standard Performance Characteristics - Part 1: Windows and Exterior Pedestrian Door Sets
JIS L 1902 Determination of Antibacterial Activity and Efficacy of Textile Products
EN 12015 Electromagnetic Compatibility - Product Family Standard for Elevators, Escalators and Passenger Conveyors
EN 16190 Soil, Treated Biowaste and Sludge - Determination of Dioxins and Furans and Dioxin-Like Polychlorinated Biphenyls by Gas Chromatography with High Resolution Mass Selective Detection (HR GC-MS)
EN ISO 9073-12 Textiles - Test Methods for Nonwovens - Demand Absorbency
BS 476 Building Materials and Fire Tests on Structures
IEC 60068-2-52 Salt Mist - Corrosion Test Standard
EN ISO 9445-1 Continuous Cold Rolled Stainless Steel - Size and Form Tolerances - Part 1: Narrow Strip and Cut Lengths
EN ISO 9445-2 Continuous Cold Rolled Stainless Steel - Size and Form Tolerances - Part 2: Wide Strip and Plate
ISO 11134 Sterilization of Health Care Products - Requirements for Verification and Routine Control - Industrial Moist Heat Sterilization
NFPA 260 Standard Test Methods for Non-Ignition Resistance of Upholstered Furniture Components
EN ISO 11507 Exposure of Coatings to Artificial Weather Conditions - Exposure to Fluorescent UV Lamps and Water
EN ISO 9773 Plastics - Determination of Combustion Behavior of Thin Flexible Vertical Samples in Contact with a Small Flame Ignition Source
EN 13432 Requirements for Packaging Recoverable by Composting and Biodegradation
ISO 3651-1 Determination of the Resistance of Stainless Steels to Intergranular Corrosion - Part 1: Austenitic and Ferritic-Austenitic (duplex) Stainless Steels
ISO 3651-3 Determination of the Resistance of Stainless Steels to Intergranular Corrosion - Part 3: Corrosion Testing for Low Cr Ferritic Stainless Steels
ISO 1522 Paints and Varnishes - Pendulum Damping Test
EN 16416 Geosynthetic Clay Barriers - Determination of Water Flux Index - Flexible Wall Permeability Method at Fixed Head
EN ISO 3386-1 Polymeric Materials - Determination of Stress Strain Properties on Compression - Part 1: Low Density Materials
EN ISO 12210 Windows and Doors - Wind Load Resistance - Classification
EN 1125 Building Equipment - Requirements for Panic Exit Devices Operated by a Horizontal Bar for Use on Escape Routes
EN 179 Building Equipment - Requirements for Emergency Exit Devices Operated by a Lever Lever or Push Pad for Use on Escape Routes
EN 1935 Building Hardware - Single Axis Hinges - Requirements and Test Methods
EN 12217 Doors - Operating forces - Requirements and Classification
ISO 2431 Paints and Varnishes - Standard Test for Determining Flow Time Using Flow Cups
DIN 18252 Profile Cylinders for Door Locks - Test Methods for Terminology, Dimensions, Requirements
ISO 2811-1 Paints and Varnishes - Determination of Density - Pycnometer Method
DIN 18257 Building Hardware - Safety Equipment - Terms, Dimensions and Requirements
ISO 2811-2 Paints and Varnishes - Determination of Density - Submerged Object (Temple) Method
ISO 3251 Paints, Varnishes and Plastics - Determination of Non-Volatile Content
EN 1906 Building Hardware - Levers and Button Furniture - Requirements and Test Methods
DIN 18251-1 Locks - Mortise Locks and Multipoint Locks - Terms, Definitions and Dimensions
DIN 18251-2 Door Locks - Mortise Locks - Main Door Lock
ISO 2808 Paints and Varnishes - Standard Test for Determination of Film Thickness
ISO 2409 Paints and Varnishes - Cross Cut Test Standard
DIN 18251-3 Locks - Mortise Locks - Part 3: Mortise Locks as Multiple Locks
EN 12209 Building Hardware - Mechanically Operated Locks and Locking Plates - Requirements and Test Methods
ISO 1520 Paints and Varnishes - Pitting Test
ISO 6270-1 Paints and Varnishes - Determination of Resistance to Moisture - Condensation (One Sided Exposure)
ISO 6270-2 Paints and Varnishes - Determination of Moisture Resistance - Procedure for Exposing Test Samples to Condensate Atmospheres
ISO 2813 Paints and Varnishes - Determination of 20掳, 60掳 and 85掳 Gloss Value
ISO 4624 Paints and Varnishes - Tensile Test Standard for Adhesion
ISO 6272-1 Paints and Varnishes - Rapid Deformation (Impact Resistance) Tests - Drop Weight Test, Large Area Indentation
ISO 1519 Paints and Varnishes - Bend Test (Cylindrical Mandrel)
AATCC 79 Test Method for Absorbency of Textiles
ISO 11664-1 Colorimetry - CIE Standard Colorimetric Observers
EN 1856-1 Requirements for Metal Chimneys - Part 1: Ready Made Chimney Products
ISO 11664-4 Colorimetry 鈥 Part 4: CIE 1976 Standard Test for Color Space
EN 1856-2 Requirements for Metal Flues - Part 2: Metal Flue Liners and Connection Flues
EN 50125-3 Railway Applications - Environmental Requirements for Equipment Part 3: Equipment for Signaling and Telecommunications
ISO 9227 Corrosion Tests in Artificial Atmospheres - Salt Spray Tests
IEC/EN 60259 Protection Degrees Provided by Enclosures (IP Code) Test Standard
ISO 3231 Paints and Varnishes - Standard Test for Determination of Resistance to Humid Environments Containing Sulfur Dioxide
EN ISO 2592 Petroleum and Related Products - Determination of Flash and Fire Points - Cleveland Open Cup Method
ISO 4892-2 Plastics - Methods of Exposure to Laboratory Light Sources - Standard Test for Xenon Arc Lamps
ISO 15797 Textiles - Industrial Washing and Finishing Procedures for Testing Workwear
ISO 16474-2 Paints and Varnishes - Methods of Exposure to Laboratory Light Sources - Xenon Arc Lamps
ISO 1924-3 Paper and Board - Determination of Tensile Properties - Part 3: Constant Elongation Rate Method (100 mm/min)
ISO 4892-3 Plastics - Methods of Exposure to Laboratory Light Sources - Fluorescent UV Lamps
ISO 16474-3 Paints and Varnishes - Methods of Exposure to Laboratory Light Sources - Fluorescent UV Lamps
ISO 11507 Paints and Varnishes - Exposure of Coatings to Artificial Weathering - Exposure to Fluorescent UV Lamps and Water
ISO 868 Plastics and Ebonite - Standard Test for Determining Indent Hardness by Durometer
ISO 7619-1 Rubber, Vulcanized or Thermoplastic - Determination of Indent Hardness - Durometer Method
IEC 62368-2 Audio, Video, Information and Communications Technology Equipment - Part 2: Descriptive Information on IEC 62368-1
ISO 527-1 Plastics - Determination of Tensile Properties - Standard Test for General Principles
Determination of ISO 527-2 Tensile Properties of Plastics, Plastic Molding and Extrusion for Standard Test
ISO 527-3 Plastics - Determination of Tensile Properties - Test Conditions for Films and Sheets
EN 12488 Glass in Building - Glass Recommendations - Installation Principles for Vertical and Curved Glass
ISO 178 Plastics - Standard Test Method for Determination of Flexural Properties
IEC 60093 Test Methods for Volume Resistance and Surface Resistance of Solid Electrical Insulation Materials
ISO 27447 Test Method for Antibacterial Activity of Semiconductor Photocatalytic Materials
EN 14342 Wood Flooring Properties, Evaluation of Conformity and Marking
ISO 2439 Flexible Cellular Polymeric Materials - Determination of Hardness - Indentation Technique
ISO 1856 Flexible Cellular Polymeric Materials - Determination of Compression Set
ISO 3451-1 Plastics - Determination of Ash - Part 1: General Methods
ISO 1183-1 Plastics - Methods for Determining Density of Noncellular Plastics - Part 1: Immersion Method, Liquid Pycnometer Method and Titration Method
ISO 294-4 Plastics 鈥 Injection Molding of Test Samples of Thermoplastic Materials 鈥 Part 4: Determination of Molding Shrinkage
ISO 527-2 Plastics - Determination of Tensile Properties - Part 2: Test Conditions for Molding and Extrusion Plastics
EN/IEC 60146-1-1 Semiconductor Converters - General Requirements and Line Commuting Converters - Part 1-1: Characteristics of Basic Requirements
EN 12211 Windows and Doors - Wind Load Resistance Test Method
EN 1027 Windows and Doors Waterproof Test Method
EN 12208 Windows and Doors - Waterproofing - Classification
EN ISO 7686 Plastic Pipes and Fittings - Determination of Opacity
EN 14878 Test Standard for Combustion Behavior of Children's Nightwear
ISO 15835-2 Steels for Concrete Reinforcement - Reinforcing Fasteners for Mechanical Joints of Bars Test methods
IEC 60598-1 Luminaires - Part 1: General Requirements and Tests
ISO 1183-1 Plastics - Methods for Determining Density of Non-Cellular Plastics - Immersion Method, Liquid Pycnometer Method and Titration Method
ISO 17704 Footwear - Test Methods for Uppers, Linings and Socks - Abrasion Resistance
ISO 2528 Plate Materials - Determination of Water Vapor Transmission Rate (WVTR) - Gravimetric (Plate) Method
ISO 17708 Footwear - Test Methods for Whole Footwear - Upper Sole Adhesion
ISO 17696 Footwear - Test Methods for Uppers, Linings and Socks - Tear Strength
ISO 8339 Building Construction - Sealants - Determination of Tensile Properties (Elongation to Fracture)
ISO 17700 Footwear - Test Methods for Uppers and Socks - Color Fastness to Rubbing and Bleeding
ISO 11432 Building Construction - Sealants - Determination of Compression Resistance
ISO 2240 Photography 鈥 Color Reverse Camera Films 鈥 Determining ISO Speed
ISO 9046 Building and Civil Engineering Sealants - Adhesion at Constant Temperature - Determination of Cohesion Properties
ISO 9047 Building Construction - Joint Products - Adhesion of Sealant at Variable Temperatures - Determination of Cohesion Properties
ISO 11431 Building Construction - Sealants - Adhesion of Glass After Exposure to Artificial Light - Determination of Cohesion Properties
ISO 868 Plastics and Ebonite - Determination of Indent Hardness Using a Durometer
ISO 2810 Paints and Varnishes - Natural Wear of Coatings - Exposure and Evaluation
IEC 62817 Photovoltaic Systems - Design Competence of Solar Tracking Devices
ISO 1183-2 Plastics - Methods for Determining Density of Noncellular Plastics - Density Gradient Column method
ISO 1183-3 Plastics - Methods for Determining Density of Non-Cellular Plastics - Gas Pycnometry Method
ISO 9626 Stainless Steel Needle Tubes for the Manufacturing of Medical Devices - Requirements and Test Methods
ISO 7886-1 Sterile Disposable Hypodermic Syringes - Part 1: Syringes for Manual Use
ISO 11358-1 Plastics - Thermogravimetry of Polymers - General Principles
ISO 10563 Buildings and Civil Engineering Works - Mastics - Determination of Change in Mass and Volume
ISO 7886-2 Sterile Disposable Hypodermic Syringes 鈥 Part 2: Syringes for Use with Power Driven Syringe Pumps
ISO 7886-3 Sterile Disposable Hypodermic Syringes - Part 3: Auto-Disable Syringes for Fixed Dose Immunization
ISO 7886-4 Sterile Disposable Hypodermic Syringes - Part 4: Anti-Reuse Syringes
DIN 50602 Microscopic Examination of Special Steels Using Standard Diagrams to Evaluate the Content of Non-Metallic Inclusions
ISO 7724-1 Paints and Varnishes - Colorimetry - Standard Test for Principles
ISO 7724-2 Paints and Varnishes - Colorimetry - Standard Test for Color Measurement
ISO 80601-2-61 Medical Electrical Equipment - Part 2-61: Special Requirements for Basic Safety and Basic Performance of Pulse Oximetry Equipment
ISO 7724-3 Paints and Varnishes - Colorimetry - Calculation of Color Differences
IEC 60900 Hand Tools Test Standard for Use Between 1000V AC and 1500V DC
EN ISO 27427 Anesthetic and Respiratory Equipment - Nebulization Systems and Components
EN 10138 Test Standard for Prestressed Steels
ISO 2039-1 Plastics - Determination of Hardness - Ball Indentation Method
EN 13310 Kitchen Sinks - Functional Requirements and Test Methods
ISO 2039-2 Plastics - Determination of Hardness - Rockwell Hardness Test Method
ISO 11040-4 Prefilled Syringes - Part 4: Glass Barrels for Injectables and Sterilized Subassembled Syringes Ready to Fill
ISO 11040-8 Prefilled Syringes - Part 8: Requirements and Test Methods for Finished Prefilled Syringes
ISO 11040-6 Prefilled Syringes - Part 6: Plastic Barrels for Injectables and Sterilized Subassembled Syringes Ready to Fill
ISO 2811-4 Paints and Varnishes - Determination of Density - Pressure Vessel Method
EN ISO 13408-3 Aseptic Processing of Health Care Products - Lyophilization Test Method
ISO 3613 Metallic and Other Inorganic Coatings - Chromate Conversion Coatings on Zinc, Cadmium, Aluminum-Zinc Alloys and Zinc-Aluminum Alloys
IEC 60763-1 Laminated Press Board for Electrical Purposes - Definitions, Classification and General Requirements
IEC 60763-2 Specifications of Laminated Press Board - Test Methods
IEC 60763-3-1 Laminated Pressed Cardboard for Electrical Purposes - Specifications for Individual Materials - Requirements for Laminated Pre-Compressed Pressed Cardboard, Types LB3.1A.1 and LB3.1A.2
AATCC 99 Dimensional Changes of Woven or Knitted Wool Textiles - Relaxation, Strengthening and Felting
ISO 212 Essential Oils - Sampling Test Standard
AATCC 81 Determination of pH Value of Water Extract from Wet-Treated Textiles
EN 12457-4 Suitability Testing for Leaching Granular Waste Materials and Sludges - Part 4: Single Stage Batch Test at 10 l/kg Liquid/Solid Ratio for Materials with Particle Sizes < 10 mm
ISO 4589-1 Plastics - Determination of Combustion Behavior by Oxygen Index - G?磤嫿u|/綞由刐洕ㄖ蹪??醒岇eneral Requirements
ISO 4898 Rigid Cellular Plastics - Thermal Insulation Products for Buildings
EN 15964 Breath Alcohol Testing Equipment - Requirements and Test Methods
EN 16280 Breath Alcohol Testing Equipment for the General Public - Requirements and Test Methods
EN 50436-1 Alcohol Interlocks Test Methods and Performance Requirements - Part 1: Devices for Drink-Driving-Offender Programs
EN ISO 4628-1 Paints and Varnishes - Evaluation of Deterioration of Coatings - Part 1: General Identification and Nomenclature System
EN ISO 8301 Thermal Insulation - Determination of Steady State Thermal Resistance and Related Properties with Heat Flow Meter Apparatus
EN ISO 9237 Determination of Air Permeability of Fabrics
EN ISO 12040 Prints and Printing Inks - Evaluation of Light Fastness Using Filtered Xenon Arc Light
EN ISO 12870 Ophthalmic Optics - Eyeglass Frames - Requirements and Test Methods
IEC 61300-2-1 Fiber Optic Interconnection Devices and Passive Components - Part 2-1: Vibration (Sinusoidal) Testing
IEC 61300-2-3 Fiber Optic Interconnection Devices and Passive Components Part 2-3: Static Shear Load Testing
IEC 61300-2-6 Fiber Optic Interconnecting Devices and Passive Components Part 2-6: Tensile Strength of Coupling Mechanism
ISO 20567-1, Paints and Varnishes - Determination of Stone Crushing Resistance of Coatings - Part 1: Multiple Impact Test
IEC 61300-2-22 Fiber Optic Interconnection Devices and Passive Components - Part 2-22: Temperature Change Test
IEC 61300-3-15 Fiber Optic Interconnect Devices And Passive Components Part 3-15: Dome Eccentricity of Convex Polished Ferrule End Face
IEC 61300-3-16 Fiber Optic Interconnect Devices and Passive Components Part 3-16: End Surface Radius of Spherically Polished Rings
IEC 61300-3-17 Fiber Optic Interconnecting Devices and Passive Components - Part 3-17: Angle of End Surface of Angle Polished Ferrules
IEC 61300-3-23 Fiber Optic Interconnection Devices and Passive Components Part 3-23: Fiber Position Relative to Ferrule End Face
ISO 4287 Geometric Product Specifications (GPS) - Surface Texture - Profile Method - Terms, Definitions and Surface Texture Parameters
Qualification and Performance Specification for IPC 6013D Flexible and Rigid-Flexible Printed Cards
Feature and Performance Specification for IPC 6016 High-Density Interconnect (HDI) Layers or Cards
MIL DTL 5541 Chemical Conversion Coatings on Aluminum and Aluminum Alloys
MIL PRF 23377K Primer Coatings - Epoxy and High Solids
MIL PRF 85285E Aircraft and Support Equipment - Polyurethane Coating Test Standard
UL 1709 Rapid Rising Fire Tests of Protection Materials for Structural Steel
UNI 9175 Determination of Fire Response of Upholstered Products by Applying Small Flame
AATCC 16 Light Color Fastness Test Standard
AATCC 30 Antifungal Evaluation and Mold Resistance Test
AATCC 42 Water Resistance - Impact Penetration Test Method
AATCC 96 Test Method for Dimensional Changes in Commercial Laundering of Woven and Knitted Fabrics Except Wool
ISO 4288 Geometric Product Specifications (GPS) - Surface Texture - Profile Method - Rules and Procedures for Evaluating Surface Texture
EN 480-6 Additives for Concrete, Mortar and Mortar - Test Methods - Part 6: Infrared Analysis
EN 1767 Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Infrared Analysis
ISO 10591 Building and Civil Engineering Sealants - Determination of Adhesion - Cohesion Properties of Sealant after Immersion in Water
ISO 4628-1 Paints and Varnishes - Evaluation of Deterioration of Coatings - Determining the Amount and Size of Defects and the Intensity of Uniform Changes in Appearance - Part 1: General System of Description and Nomenclature
ISO 4628-8 Paints and Varnishes - Evaluation of Deterioration of Coatings - Part 8: Evaluation of Delamination and Degree of Corrosion Around a Scratch or Other Artificial Defect
ISO 5838-2 Implants for Surgery - Skeletal Needles and Wires
ISO 12076 Steel Wire Ropes - Determination of Actual Modulus of Elasticity
EN 61284 Aerial Lines - Requirements and Tests for Fittings
EN 853 Rubber Hoses and Hose Assemblies - Wire Braid Reinforced Hydraulic Type - Specification
EN 856 Rubber Hoses and Hose Assemblies - Rubber Covered Spiral Wire Reinforced Hydraulic Type
EN 10147 Continuous Hot Dipped Zinc Coated Structural Steels Strip and Sheet - Technical Delivery Conditions
EN 1176-1 Playground Equipment and Surface Coating - Part 1: General Safety Requirements and Test Methods
EN 1177 Impact Mitigating Playground Covering - Test Methods for Determining Impact Attenuation
EN 1607 Thermal Insulation Products for Building Applications - Determination of Tensile Strength Perpendicular to Faces
EN 1815 Flexible and Laminate Flooring - Evaluation of Static Electrical Tendency
EN 12004-2 Adhesives for Ceramic Tiles - Part 2: Test Methods
ISO 10499-1 Industrial Tires and Rims - Rubber Filled Tires for Pneumatic Tire Wheels (Metric Series)
EN 13468 Thermal Insulation Products for Building Equipment and Industrial Facilities - Determination of Trace Water-Soluble Chloride, Fluoride, Silicate, Sodium Ions and pH
EN 14308 Thermal Insulation Products for Building Equipment and Industrial Facilities - Rigid Polyurethane Foam (PUR) and Polyisocyanurate Foam (PIR) Products
EN 14706 Thermal Insulation Products for Building Equipment and Industrial Facilities - Determination of Maximum Service Temperature
EN 55020 Audio and Television Broadcast Receivers and Related Equipment - Immunity Characteristics - Limits and Methods of Measurement
EN 60672-3 Ceramic and Glass Insulating Materials Part 3: Specifications for Individual Materials
EN 338 Structural Timber - Strength Classes Test Method
EN 60811-401 Electrical and Fiber Optic Cables - Part 401: Thermal Aging Methods - Air Oven Aging
EN 60811-504 Electrical and Fiber Optic Cables - Part 504: Low Temperature Bending Tests for Insulation and Sheaths
EN 60811-506 Electrical and Fiber Optic Cables - Part 506: Low Temperature Impact Test for Insulations and Sheaths
EN 62196-1 Conductive Charging of Electric Vehicles - Part 1: General Requirements
EN 62321-3-2 Determination of Certain Substances in Electrotechnical Products - Part 3-2: Total Bromine - Ion Chromatography by Combustion in Polymers and Electronics
EN 62321-4 Determination of Specific Substances in Electrotechnical Products - Part 4: Mercury in Polymers, Metals and Electronics with CV-AAS, CV-AFS, ICP-OES and ICP-MS
EN 25978 Rubber or Plastic Coated Fabrics - Determination of Blocking Resistance
EN 62321-5 Determination of Specific Substances in Electrotechnical Products - Part 5: Lead and Cadmium in Polymers, Electronics, Chromium and Metals with AAS, AFS, ICP-OES and IC4鍍'缰班S駃2l顜揥瀉<q癙-MS
EN 62321-7-1 Determination of Certain Substances in Electrotechnical Products - Part 7-1: Hexavalent Chromium on Metals - Colorimetric Method
EN 62471 Photobiological Safety of Lamps and Lamp Systems
EN ISO 811 Textiles - Determination of Resistance to Water Penetration - Hydrostatic Pressure Test Method
EN ISO 1307 Rubber and Plastic Hoses - Hose Dimensions, Minimum and Maximum Inner Diameters and Tolerances in Cut-To-Length Hoses
EN ISO 15874-3 Plastic Pipe Systems for Hot and Cold Water Installations - Polypropylene (PP) - Part 3: Fittings
EN ISO 19069-2 Plastics - Polypropylene (PP) Molding and Extrusion Materials - Part 2: Preparation of Test Samples and Determination of Properties
IEC 60669-1 Switches for Household and Similar Fixed Electrical Installations - Part 1: General Requirements
IEC 60794-1-21 Fiber Optic Cables - Part 1-21: General Specifications - Basic Optical Cable Mechanical Test Methods
IEC 60884-1 Plugs and Sockets for Household and Similar Purposes - Part 1: General Requirements
AS-NZS 1748.1 Solid Wood - Stress-Rated for Structural Purposes - Part 1: General Requirements
IEC 60945 Marine Navigation and Radiocommunication Equipment and Systems - General Requirements
IEC 61300-2-2 Fiber Optic Interconnect Devices and Passive Components - Part 2-2: Mating Endurance
AS-NZS 1748.2 Product Requirements for Mechanically Stressed Wood - Qualification of Grading Method
IEC 61300-2-4 Fiber Optic Interconnection Devices and Passive Components - Part 2-4: Fiber or Cable Retention
IEC 61300-3-2 Fiber Optic Interconnection Devices and Passive Components - Part 3-2: Polarization-Related Loss in a Single-Mode Fiber Optic Device
IEC 61300-3-4 Fiber Optic Interconnect Devices and Passive Components - Part 3-4: Reviews and Measurements - Attenuation
IEC 61300-3-6 Fiber Optic Interconnection Devices and Passive Components - Part 3-2: Return Loss
IEC/EN 60695-11-10 Fire Hazard Test - Part 11-10: Test Flames - 50W Horizontal and Vertical Flame Test Methods
IEC/EN 60825-1 Safety of Laser Products - Part 1: Equipment Classification and Requirements
ISO 306 Plastics 鈥 Thermoplastic Materials 鈥 Determination of Vicat Softening Temperature (VST)
ISO 844 Rigid Cellular Plastics - Determination of Compression Properties
ISO 1518 Paints and Varnishes - Determination of Scratch Resistance - Fixed Loading Method
ISO 2039-1 Plastics - Determination of Hardness - Part 1: Ball Indentation Method
ISO 2039-2 Plastics - Determination of Hardness - Part 2: Rockwell Hardness
ISO 4892-2 Plastics - Methods of Exposure to Laboratory Light Sources - Part 2: Xenon Arc Lamps
ISO 5367 Anesthetic and Respiratory Equipment - Breathing Sets and Connectors
ISO 6506-1 Metallic Materials - Brinell Hardness Test - Part 1: Test Method
ISO 6920-1 Crude Sodium Borates for Industrial Use - Determination of Total and Alkaline Soluble Calcium and Magnesium Contents by Titrimetric Method
ISO 11530 Road Vehicles - Hydraulic Jacks - Features
ISO 14708-1 Active Implantable Medical Devices - Part 1: General Requirements for Safety, Marking and Information to be Provided by the Manufacturer
Determination of Final Aerobic Biodegradability of Plastic Materials Under ISO 14855 Controlled Composting Conditions
ISO 18562-2 Biocompatibility Assessment of Respiratory Gas Routes in Healthcare Applications - Part 2: Tests for Particulate Matter Emissions
ISO 18562-3 Assessment of Biocompatibility of Respiratory Gas Routes - Part 3: Tests for Emissions of Volatile Organic Compounds (VOCs)
ISO 18562-4 Biocompatibility Assessment of Respiratory Gas Routes - Part 4: Tests for Leakages in Condensate
ISO 20932-1 Textiles - Determination of Elasticity of Fabrics - Part 1: Strip Tests
ISO 22241-1 Diesel Engines - NOx Reducing Agent AUS 32 - Part 1: Quality Requirements
ISO 22241-2 Diesel Engines - NOx Reducing Agent AUS 32 - Part 2: Test Methods
ISO 80369-7 Small Diameter Connectors for Liquids and Gases in Healthcare Applications - Part 7: Performance Testing of Luer Connectors
MIL STD 220C Insertion Loss Measurement Methods
MIL STD 285 Attenuation Measurements for Enclosures and Electromagnetic Shielding
MIL STD 1397 NPFC - Input/Output Interfaces, Standard Numerical Data, Naval Systems
NFPA 11 Test Standard for Low, Medium, and High-Expansion Foam
SI (Service Instruction) 1324 Furniture and Furnishings Guide (Fire) Safety Regulations
DIN 4102-5 Fire Behavior of Building Materials and Building Components - Fire Barriers, Barriers in Elevator Shafts and Fire Resistant Glass
AATCC 81 Determination of pH Value of Water Extract from Wet-Treated Textiles
DIN 4102-4 Fire Behavior of Building Materials and Elements - General Appearance and Design of Classified Building Materials, Elements and Components
DIN 4102-12 Fire Behavior of Building Materials and Components - Fire Resistance of Electrical Wiring Systems Required to Maintain Circuit Integrity
AATCC 99 Dimensional Changes of Woven or Knitted Wool Textiles - Relaxation, Strengthening and Felting
EN 54-3 Fire Detection and Fire Alarm Systems - Part 3: Fire Alarm Devices - Sirens
DIN 16995 Films for Packaging - Wrapping sheets - Plastic Sheets - Properties and Test Methods
EN 1186-1 Plastic Materials in Contact with Foodstuffs - Part 1: Guidance on Selection of Conditions and Test Methods for General Migration
DIN 53122 Determination of Water Vapor Transmission Rate of Plastic Film, Rubber Sheet, Paper, Cardboard and Other Sheet Materials by Gravimetry
EN 1186-2 Plastics in Contact with Foodstuffs - Part 2: Test Methods for General Migration into Olive Oil by Full Immersion
DIN 53380 Testing Plastic Films - Determining Gas Transmission Ratio
EN 1186-5 Plastics in Contact with Foodstuffs - Part 5: Test Methods for General Migration by Cell to Aqueous Food Simulants
EN 1186-9 Plastic Materials in Contact with Foodstuffs - Part 9: Test Methods for General Migration into Aqueous Food Equivalents by Stuffing
DIN 73378 Polyamide Pipe for Use in Motor Vehicles
EN 1279-4 Glass in Building - Insulating Glass Units - Part 4: Test Methods for Physical Properties of Edge Seal Components and Attachments
EN 1568-1 Fire Extinguisher - Foam Concentrates - Part 1: Characteristics of Medium Expansion Foam Concentrates for Surface Application to Immiscible Liquids
EN 1568-2 Fire Extinguisher - Foam Concentrates - Part 2: Specifications for High Expansion Foam Concentrates for Surface Application to Immiscible Liquids
EN 1568-3 Fire Extinguisher - Foam Concentrates - Part 3: Characteristics of Low Expansion Foam Concentrates for Surface Application to Immiscibl豊漊-?1枺丼X"馸0轖醋c?e Liquids
EN 1568-4 Fire Extinguisher - Foam Concentrates - Part 4: Specifications for Low Expansion Foam Concentrates for Surface Application to Water Miscible Liquids
EN 12195-2 Load Limiting Devices in Road Vehicles - Safety - Part 2: Netting Made of Artificial Fibers
EN 13501-2 Fire Classification of Building Materials and Structural Elements - Part 2: Classification of Data from Fire Resistance Tests
EN 13501 Part 3: Classification of Data from Fire Resistance Tests on Products and Elements Used in Building Service Facilities
JIS Z-0208 Test Methods for Determining the Water Vapor Transmission Rate of Moisture-Resistant Packaging Materials (Plate Method)
JIS K-7129 Plastic Films and Coatings - Determination of Water Vapor Transmission Rate
JIS K-7126 Test Method for Gas Transmission Rate of Plastic Films and Coatings
EN 13726-1 Test Methods for Primary Dressings - Part 1: Properties of Absorbency
EN 13726-2 Test Methods for Primary Wound Dressings - Part 2: Moisture Vapor Transmission Rate of Permeable Film Dressings
EN 13726-3 Test Methods for Primary Wound Dressings - Part 3: Waterproof
EN 13726-4 Test Methods for Primary Wound Dressings - Part 4: Compliance
EN 13726-6 Test Methods for Primary Wound Dressing - Part 6: Odor Control
EN 13956 Flexible Sheets for Waterproofing - Plastic and Rubber Sheets for Roof Waterproofing
EN 29073-3 Textiles - Test Methods for Nonwovens - Part 3: Determination of Tensile Strength and Elongation
EN 14081-1 Timber Structures - Rectangular Section Strength Grade Structural Timber - Part 1: General Requirements
EN 50125-1 Railway Applications - Environmental Requirements for Equipment - Part 1: Rolling Stock and Onboard Equipment
EN 60332-1-2 Electrical and Fiber Optic Cables Under Fire Conditions - Part 1-2: 1 kW Premixed Flame Propagation Test for a Single Insulated Wire or Cable
EN 60332-3-24 Electrical and Fiber Optic Cables Under Fire Conditions - Part 3-24: Vertical Flame Propagation of Vertically Mounted Bundled Wires or Cables
EN 60669 Switches for Household and Similar Fixed Electrical Installations
EN ISO 11721-1 Textiles - Determination of the Resistance of Textiles Containing Cellulose to Microorganisms - Part 1: Evaluation of Antifouling Finish
SAI AS 2869 Bumpers - Piece Test Standard
VW PV 3935 Automotive - Standard Test for Plastics and Elastomers
EN ISO 1183-1 Plastics - Methods for Determining Density of Non-Cellular Plastics - Immersion Method, Liquid Pycnometer Method and Titration Method
EN ISO 2811-1 Paints and Varnishes - Determination of Density - Part 1: Pycnometer Method
EN ISO 10164 Steel Products with Improved Deformation Properties Perpendicular to the Product Surface - Technical Delivery Conditions
EN ISO 10563 Buildings and Civil Engineering Works - Mastics - Determination of Change in Mass and Volume
EN ISO 11117 Gas Cylinders - Valve Protection Caps and Housings - Design, Construction and Tests
EN 50363 Insulation, Sheathing and Coating Materials for Low Voltage Power Cables
EN ISO 11140-3 Sterilization of Health Care Products - Part 3: Class 2 Indicator Systems for Use in Bowie and Dick Steam Penetration Testing
EN ISO 11140-4 Sterilization of Health Care Products - Chemical Indicators - Part 4: Bowie and Dick Type Test for Detection of Steam Penetration
EN ISO 12572 Hygrothermal Performance of Building Materials and Products - Determination of Water Vapor Permeability Properties
MIL-I 24244 Stress Corrosion Cracking in Austenitic Stainless Steel
IEC 60255-21-1 Electrical Relays - Part 21: Vibration Tests on Measuring Relays and Protection Equipment (Sinusoidal)
IEC 60947-3 Low Voltage Switchgear and Controller - Part 3: Switches, Disconnectors, Load Disconnectors and Fuse Combination Units
ISO 1663 Rigid Cellular Plastics - Determination of Water Vapor Transmission Properties
ISO 2528 Plate Materials - Determination of Water Vapor Transmission Rate (WVTR) - Gravimetric (Plate) Method
ISO 2556 Plastics - Determination of Gas Transmission Rate of Films and Thin Sheets Under Atmospheric Pressure - Manometric Method
ISO 4081 Rubber Hoses and Pipes for Cooling Systems for Internal Combustion Engines
ISO 6452 Rubber or Plastic Coated Fabrics - Fogging Properties of Car Interior Trim Materials
ISO 7229 Rubber or Plastic Coated Fabrics - Measurement of Gas Permeability
ISO 7390 Building Construction - Joining Products - Determination of Resistance to Leakage of Sealants
ISO 7668 Anodizing of Aluminum and Its Alloys - Specular Reflection and Specular Gloss of Anodic Oxidation Coatings at 20, 45, 60 or 85 Degree Angles
ISO 15630-2 Steel for Reinforcing and Prestressing Concrete - Test Methods - Welded Fabric and Lattice Beams
ISO 9932 Determination of Water Vapor Transmission Rate of Paper and Cardboard - Sheet Materials - Dynamic Sweeping and Static Gas Methods
ISO 17665-1 Sterilization of Health Care Products - Moist Heat - Requirements for the Development, Validation and Routine Control of a Sterilization Process for Medical Devices
ISO 11341 Paints and Varnishes - Exposure to Artificial Weathering - Exposure to Filtered Xenon Arc Radiation
ISO 11607-2 Packaging for Sterilized Medical Devices - Part 2: Verification Requirements for Forming, Sealing and Assembly Processes
ISO 13779-6 Implants for Surgery - Hydroxyapatite - Part 6: Powders
ISO 15106 Plastics - Film and Coating - Determination of Water Vapor Transmission Rate
ISO 15105 Plastics - Film and Coating - Determination of Gas Transmission Rate
ISO 16000-9 Indoor Air - Part 9: Determination of Emissions of Volatile Organic Compounds from Building Products and Flooring
ISO 16021 Urine Absorbent Auxiliaries - Evaluation of Disposable Adult Incontinence Inhibitors
ISO 17881-1 Textile - Determination of Specific Flame Retardants - Part 1: Brominated Flame Retardants
ISO 17881-2 Textile - Determination of Specific Flame Retardants - Part 2: Phosphorus Flame Retardants
ISO 18369 Ophthalmic Optics - Contact Lenses
EN 12664 Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Protected Hot Plate and Heat Flow Meter Methods - Dry and Humid Products with Medium and Low Thermal Resistance
ISO 13629-2 Textiles - Determination of Antifungal Activity of Textile Products - Plate Counting Method
DIN 4102-17 Fire Behavior of Building Materials and Components - Determination of the Melting Point of Mineral Fiber Insulation Materials
EN 1423 Road marking Materials - Falling Materials - Glass Beads, Non-Slip Aggregates and Mixtures of the Two
ISO 11040-7 Prefilled Syringes - Part 7: Packaging Systems for Sterilized Subassembled Syringes Ready for Filling
DIN 4102-1 Fire Behavior of Building Materials and Components Part 1: Classification of Building Materials and Requirements
DIN 4102-3 Fire Behavior of Building Materials and Building Components - Firewalls and Non-Structural External Walls
EN 50085-1 Cable Tray Systems for Electrical Installations Part 1: General Requirements
EN 50085-2-1 Cable Tray Systems for Electrical Installations - Part 2-1: Cable Tray Systems Intended for Mounting in Walls and Ceilings
EN 61386-1 Ducting Systems for Cable Management - Part 1: General Requirements
ISO 2578 Plastics - Setting Time-Temperature Limits After Prolonged Exposure to Heat
BS 4407 Methods for Quantitative Analysis of Fiber Blends
ISO 14160 Sterilization of Health Care Products - Liquid Chemical Sterilization Agents for Disposable Medical Devices Using Animal Tissues and Derivatives
ISO 11979-1 Ophthalmic Implants - Intraocular Lenses - Part 1: Vocabulary
EN ISO 17225-1 Solid Biofuels - Fuel Properties and Classes - General Requirements
EN 15345 - Recycled Plastic - Characterization of Recycled Polypropylene (PP)
ISO 16017-1 Indoor, Ambient and Workplace Air - Sampling of Volatile Organic Compounds by Absorbent Tube/Thermal Desorption/Capillary Gas Chromatography - Part 1: Pump Sample
EN 16421 Effect of Materials on Water for Human Consumption - Enhancement of Microbial Growth (EMG)
EN ISO 3385 Flexible Cellular Polymeric Materials - Determination of Fatigue by Constant Load Impact
EN 50289-4-17 Communication Cables - Part 4-17: Test Method for Evaluation of UV Resistance of Electrical and Fiber Optic Cable Sheath
EN 10088 Test Method for Stainless Steels
EN 1673 Food Processing Machinery - Rotary Rack Ovens - Safety and Hygiene Requirements
ISO 845 Cellular Plastics and Rubbers - Determination of Apparent Density
ISO 717-1 Evaluation of Sound Insulation in Buildings and Structural Elements - Part 1: Airborne Sound Insulation
EN 12567-1 Thermal Performance of Windows and Doors - Determination of Thermal Transmittance by Hot Box Method - Part 1: Complete Windows and Doors
IEC 60238 Test Standard for Edison Screw Holders
EN ISO 3386-2 Flexible Cellular Polymeric Materials - Determination of Stress-Strain Properties in Compression - Part 2: High Density Materials
EN 1303 Building Hardware - Cylinders for Locks - Requirements and Test Methods
DIN 18250 Test Standard for Mortise Locks for Fire Protection and Smoke Protection Doors
AATCC 8 Color Fastness Against Crocking: The Crockmeter Method
EN 14399-4 High Strength Structural Bolting Assemblies for Preload - Part 4: System HV - Hex Bolt and Nut Assemblies
EN 12749 Footwear - Aging Conditioning Test Standard
EN 14399-6 High-Strength Structural Bolting Assemblies for Preloading - Part 6: Flat Chamfered Washers
EN ISO 11890-2 Paints and Varnishes - Determination of Volatile Organic Compounds (VOC) or Semi-Volatile Organic Compounds (SVOC) - Part 2: Gas Chromatographic Method
ISO 11890-1 Paints and Varnishes - Determination of Volatile Organic Compound (VOC) Content - Part 1: Method of Difference
ISO 11644 Leather - Test for Surface Adhesion
ISO 11642 Leather - Color Fastness Tests - Color Fastness to Water
ISO 105-B02 Textiles 鈥 Color Fastness Tests 鈥 Part B02: Color Fastness to Artificial Light: Xenon Arc Damping Lamp Test
ISO 12076-1 Steel Wire Ropes - Determination of Actual Modulus of Elasticity
IEC/EN 60695-2-13 Fire Hazard Testing - Part 2-13: Glowing/Hot Wire Based Test Methods (GWIT)
DIN 51130 Test of Floor Coverings - Determination of Non-slip Feature - Working Rooms and Activity Areas with Slip Hazard - Walking Method - Ramp Test
EN 1822 High Efficiency Air Filters (EPA, HEPA and ULPA)
EN 1307 Textile Floor Coverings - Classification Test Standard
BS 4745 Determination of Thermal Resistance of Textiles - Two Plate Method: Constant Pressure Procedure, Two Plate Plate Method: Fixed Opening Procedure and Single Plate Method
BS 1006 Test Methods for Color Fastness of Textile and Leather
ISO 10361 Textile Floor Coverings - Generating Appearance Changes with Vettermann Drum and Hexapod Tumbler Tester
EN ISO 2812-1 Paints and Varnishes - Determination of Resistance to Liquids - Part 1: Immersion in Non-Water Liquids
ISO 4919 Textile Floor Coverings - Determination of Tuft Pulling Force
EN ISO 2812-2 Paints and Varnishes - Determination of Resistance to Liquids - Part 2: Immersion Method
ISO 2094 Textile Floor Coverings - Determination of Thickness Loss Under Dynamic Loading
EN ISO 2812-3 Paints and Varnishes - Determination of Resistance to Liquids - Part 3: Method Using an Absorbent Media
EN ISO 2812-4 Paints and Varnishes - Determination of Resistance to Liquids - Part 4: Staining Methods
ISO 3416 Textile Floor Coverings - Determination of Loss of Thickness after Long Term, Heavy Static Loading
ISO 2813 Paints and Varnishes - Determination of Gloss Value at 20, 60 and 85 Degrees
BS 4939 Method for Determining the Loss of Thickness of Textile Floor Coverings After Long-Term Heavy Static Loading
ISO 15184 Paints and Varnishes - Determination of Film Hardness by Pencil Test
ISO 1518-1 Paints and Varnishes - Determination of Scratch Resistance - Part 1: Fixed Installation Method
ISO 11998 Paints and Varnishes - Determination of Wet Scrubbing Resistance and Cleanability of Coatings
BS 5229 Method for Determining the Tufting Pull of Carpets
ISO TS 19930 Sterility of a Finally Sterilized, Disposable Health Care Product - Guidance on Aspects of a Risk-Based Approach
EN ISO 898-1 Mechanical Properties of Carbon Steel and Alloy Steel Fasteners - Bolts, Screws and Studs with Property Classes - Coarse Thread and Fine Pitch Thread
EN ISO 3506-1 Mechanical Properties of Corrosion Resistant Stainless Steel Fasteners - Bolts, Screws and Studs
EN 60216-1 Electrical Insulating Materials - Thermal Endurance - Part 1: Standard Test for Aging Procedures and Evaluation of Test Results
EN 755-2 Aluminum and Aluminum Alloys - Extruded Bar - Rod, Tube and Profiles - Part 2: Mechanical Properties
EN IEC 60728-11 Cable Networks for Television Signals, Audio Signals and Interactive Services - Part 11: Security
EN 16516 Construction Products - Evaluation of Emissions of Hazardous Substances - Determination of Emissions to Indoor Air
EN 147 Respiratory Protective Devices - Power Assisted Particulate Filtering Devices Including Full Face Masks, Half Masks or Quarter Masks
EN 50083 Radio Base Stations and Fixed Terminal Stations for Wireless Telecommunications Systems (110 MHz - 40 GHz) - Calculation of Electromagnetic Field Strength and SAR
EN 60728 Cable Networks for Television Signals, Audio Signals and Interactive Services
ISO 23936-2 Non-Metallic Materials in Contact with Oil and Gas Production Media - Part 2: Elastomers
ISO 23936-1 Non-Metallic Materials in Contact with Oil and Gas Production Media - Part 1: Thermoplastics
ISO 20444 Rubber and Plastic Hoses - Determination of Outer Cap Wear Resistance - Part : Abrasion Tests in which the Hose is Rotated Against a Piston Wear Tool
EN ISO 10524-1 Pressure Regulators for Use with Medical Gases - Part 1: Pressure Regulators with Flow Meters
EN 789 Wooden Structures - Test Method for Determining Mechanical Properties of Wood Based Panels
IEC 60227-7 Polyvinyl Chloride Insulated Cables with Nominal Voltages Up to (Included) 450/750 Volts - Part 7: Shielded and Unshielded Flexible Cables with Two or More Conductors
ISO 815-1 Rubber, Vulcanized or Thermoplastic - Determination of Compression Set - Part 1: Ambient or High Temperatures
EN ISO 15874-2 Plastic Pipe Systems for Hot and Cold Water Installations - Polypropylene (PP) - Part 2: Pipes
ISO 12236 Geosynthetics 鈥 Static Puncture Test (CBR Test)
ISO 4628-3 Paints and Varnishes - Evaluation of Deterioration of Coatings - Amount and Size of Defects - Part 3: Degree of Corrosion
ISO 4628-2 Paints and Varnishes - Evaluation of Deterioration of Coatings - Amount and Size of Defects - Part 2: Evaluation of Blistering Degree
ISO 11608-1 Needle Based Injection Systems for Medical Use - Part 1: Needle Based Injection Systems
ISO 11608-2 Needle Based Injection Systems for Medical Use - Part 2: Needles
ISO 75-1 Plastics - Determination of Deflection Temperature Under Load - Part 1: General Test Method
ISO 75-2 Plastics - Determination of Deflection Temperature Under Load - Part 2: Plastics and Ebonite
EN 1366-4 Fire Resistance Tests for Service Installations - Part 4: Linear Joint Gaskets
EN 442-2 Radiators and Convectors - Part 2: Test Methods and Rating
ISO 9772 Cellular Plastics - Determination of Horizontal Combustion Properties of Small Samples Exposed to Small Flame
EN 310 Wood Based Panels - Determination of Modulus of Elasticity in Bending and Flexural Strength
IEC 62620 Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Secondary Lithium Batteries for Use in Industrial Applications
EN 1279-1 Glass in Building - Insulating Glass Units - Part 1: Generalities, System Description, Substitution Rules, Tolerances and Visual Quality
EN 1279-6 Indoor Glass - Insulating Glass Units - Part 6: Factory Production Control and Periodic Tests
EN 14115 Textile - Combustion Behavior of Materials for Frames, Tent and Related Products - Ease of Ignition
ISO 9912 Agricultural Irrigation Equipment - Filters for Micro Irrigation
ISO 9911 Agricultural Irrigation Equipment - Hand Operated Small Plastic Valves
EN 14509 Self Supporting Double Skin Metal Face Insulation Panels - Factory Made Products - Features
EN ISO 5774 Plastic Hoses - Textile Reinforced Types for Compressed Air Applications - Specification
ASME SA 240 Chromium and Chromium-Nickel Stainless Steel Plate, Plate, and Strip Specification for Pressure Vessels and General Applications
EN 13480 Test Standard for Metallic Industrial Piping
EN 1928 Flexible Sheets for Waterproofing - Bitumen, Plastic and Rubber Sheets for Roof Waterproofing - Determination of Waterproofing
IEC 61340-2-3 Electrostatic - Part 2-3: Test Methods for Determining the Resistivity and Resistivity of Solid Materials Used to Prevent Electrostatic Charge Accumulation
EN 13859-1 Flexible Sheets for Waterproofing - Definitions and Properties of Subcovers - Part 1: Covers for Discontinuous Roofs
IEC 60335-2-31 Household and Similar Electrical Appliances - Safety - Part 2-31: Special Requirements for Hoods and Other Cooking Fume Extractors
BS 5867-2 Fabrics Test Standard for Curtains, Curtains and Blinds
EN 1107-1 Flexible Sheets for Waterproofing - Part 1: Bitumen Sheets for Roof Waterproofing - Determination of Dimensional Stability
EN 1107-2 Flexible Sheets for Waterproofing - Determination of Dimensional Stability - Part 2: Plastic and Rubber Sheets for Roof Waterproofing
EN 1109 Flexible Sheets for Waterproofing - Bitumen Sheets for Roof Waterproofing - Determination of Low Temperature Flexibility
EN 495-5 Flexible Sheets for Waterproofing - Determination of Low Temperature Foldability - Plastic and Rubber Sheets for Roof Waterproofing
EN 934-2 Concrete, Mortar and Mortar Additives - Part 2: Concrete Additives - Definitions, Requirements, Compliance, Work Marking and Labeling
EN ISO 6721-1 Plastics - Determination of Dynamic Mechanical Properties - Part 1: General Principles
EN ISO 6721-3 Plastics - Determination of Dynamic Mechanical Properties - Part 3: Bending Vibration - Resonance Curve Method
EN 22313 Textile Fabrics - Determination of a Horizontally Folded Specimen by Measuring the Wrinkle Recovery Angle
NORSOK M710 Standard Test for Elastomer Gaskets
EN ISO 2313 Textiles - Determination of Recovery from Crease of a Folded Fabric Sample by Measuring the Recovery Angle
KS K0190 Test Method for Phenolic Yellowing of Textiles: Courtaulds Method
IPC-JEDEC J-STD-020 Moisture - Reflow Sensitivity Classification for Non-Hermetic Solid State Surface Mount Devices
IPC JEDEC J-STD-035 Common IPC-JEDEC Standard for Acoustic Microscopy for Non-Neretric Encapsulated Electronic Components
IEC 61057 Live Operation - Insulating Air Devices for Chassis Mounting
AAMA 620 Voluntary Specification for High Performance Organic Coatings on Coil Coated Architectural Aluminum Substrates
EN 10169 Continuous Organic Coated (Roll Coated) Steel Flat Products - Technical Delivery Conditions
EN ISO 2060 Textiles - Yarns from Packages - Determination of Linear Density (Mass Per Unit Length) by Hank Method
EN ISO 2062 Textiles - Yarns from Packages - Determination of Force at Break and Elongation at Break Using a Constant Elongation Ratio (CRE) Tester
ISO 18067 Textile - Synthetic Filament Yarns - Determination of Dry-Hot Air Shrinkage (After Processing)
EN 14621 Textiles - Multifilament Yarns - Test Methods for Textured or Non-Textured Filament Yarns
ISO 16549 Textile - Evenness of Textile Yarns - Capacitance Method
EN ISO 2061 Textiles - Determination of Twist in Yarns - Direct Count Method
EN ISO 13936 Textiles - Determination of Slip Resistance of Threads in a Stitch in Woven Fabrics
EN 1276 Chemical Disinfectants and Antiseptics - Bactericidal Efficacy of Chemical Disinfectants and Antiseptics Used in Food, Industrial, Domestic and Institutional Areas
EN 12469 Biotechnology - Performance Criteria for Microbiological Safety Cabinets
EN ISO 354 Acoustics - Measuring Sound Absorption in a Reverberation Chamber
EN 81-58 Safety Rules for the Construction and Installation of Elevators - Inspection and Tests - Part 58: Fire Resistance Test for Landing Doors
EN 15283-2 Fibrous Reinforced Gypsum Boards - Definitions, Requirements and Test Methods - Part 2: Gypsum Fiberboards
EN 60695-2-2 Fire Hazard Test Part 2: Needle-Flame Test
EN 1650 Chemical Disinfectants and Antiseptics - Evaluation of the Fungicide or Yeasticidal Efficacy of Chemical Disinfectants and Antiseptics (Phase 2, Step 1)
EN 15283-1 Fibrous Reinforced Gypsum Boards - Definitions, Requirements and Test Methods - Part 1: Matte Reinforced Gypsum Boards
AATCC 86 Test Method for Dry Cleaning: Durability of Applied Designs and Coatings
DIN 53508 Standard Test for Accelerated Aging of Rubber
ISO 105 Textiles - Color Fastness Tests
EN ISO 21149 Makeup Materials - Microbiology - Counting and Detection of Aerobic Mesophilic Bacteria
AS NZS 1748.1 Timber - Solid - Stress-Rated for Structural Purposes, Part 1: General Requirements
Corrosion Protection of Steel Structures with ISO 12944 Protective Paint Systems
EN ISO 16212 Cosmetics - Microbiology - Standard Test for Yeast and Mold Count
IEC 61340-4-1 Electrostatics - Part 4-1: Standard Test Methods for Special Applications - Electrical Resistance of Floor Coverings and Installed Floors
EN ISO 105-B06 Textiles - Color Fastness Tests - Part B06: Aging to Artificial Light at High Temperatures: Xenon Arc Damped Lamp Test
DIN 75202 Determination of Color Fastness of Interior Materials in Motor Vehicles, Xenon Arc Lamp Test
EN 285 Sterilization - Steam Sterilizers - Large Sterilizers
TSM 5746G Thermoplastic Elastomer Materials for Exterior Moldings
EN 1103 Textiles - Garment Fabrics - Detailed Procedure for Determining Combustion Behavior
EN 1765 Rubber Hose Kits for Oil Suction and Drain Services - Specifications for Assemblies
ISO 5636-3 Paper and Cardboard - Determination of Air Permeability (Mid Range) - Part 3: Bendtsen Method
EN 840-6 Mobile Waste and Recycling Containers - Part 6: Safety and Health Requirements
DIN 53370 Testing of Plastic Films - Determination of Thickness by Mechanical Screening
ISO 178 Plastics - Standard Test for Determining Flexural Properties
EN 1027 Windows and Doors - Waterproof - Test Standard
EN 12210 Windows and Doors - Wind Load Resistance - Classification
EN 1366-4 Fire Resistance Tests for Service Installations - Part 4: Standard Test for Linear Joint Gaskets
EPA 24 VOC Determination of Volatile Organic Compound (VOC) Content in Paints, Inks and Related Coatings
EN 660-1 Flexible Floor Coverings - Determination of Abrasion Resistance - Part 1: Stuttgart Test
ISO 6722-1 Road Vehicles - 60V and 600V Single Core Cables
EN 10169 Continuous Organic Coated (Roll Coated) Steel Flat Products - Part 2: Products for Building Exterior Applications
EN ISO 11402 Phenolic, Amino and Condensation Resins - Determination of Free Formaldehyde Content
EN 16516 Construction Products - Evaluation of the Release of Hazardous Substances - Test for Determination of Emissions to Indoor Air
ISO 22674 Dentistry - Test Standard for Metallic Materials for Fixed and Removable Restorations and Appliances
IEC 60695-2-12 Fire Hazard Test - Part 2-12: Glowing - Hot Wire Based Test Methods - Glowing Wire Flammability Index (GWFI) Test Method for Materials
EN 21974 Paper - Standard Test for Determination of Tear Resistance (Elmendorf method)
IEC 60422 Mineral Insulating Oils for Electrical Equipment - Inspection and Maintenance Manual
IEC 60247 Insulating Liquids - Measurement of Relative Permeability, Dielectric Dissipation Factor (Tan d) and DC Resistance
IEC 60156 Insulating Fluids - Determination of Breakdown Voltage at Power Frequency - Test Method
IEC 60814 Insulating Fluids - Determination of Water by Automatic Coulometric Karl Fischer Titration of Oil Impregnated Paper and Pressboard
UL 723 UL Standard for Safety Testing for Surface Combustion Properties of Building Materials
ISO 812 Rubber, Vulcanized or Thermoplastic - Determination of Low Temperature Fragility
IEC 60296 Fluids for Electrotechnical Applications - Mineral Insulating Lubricants for Electrical Equipment
IEC 62021 Insulating Fluids - Determination of Acidity - Part 3: Test Methods for Non-Mineral Insulating Oils
ISO 1431-2 Rubber, Vulcanized or Thermoplastic - Resistance to Ozone Cracking - Part 2: Dynamic Strain Testing
IEC 62021-1 Insulating Liquids - Determination of Acidity - Part 1: Automatic Potentiometric Titration
ISO 14126 Fiber Reinforced Plastic Composites - Determination of In-Plane Direction Compression Properties
DIN 16874 High Density Polyethylene (PE-HD) Pipes for Underground Telecommunications - Dimensions and Technical Delivery Conditions
ISO 14129 In-plane Shear Stress Test for Shear-Strain Response
IEC 60672-2 Ceramic and Glass Insulating Materials - Part 2: Test Methods
IEC 60243-1 Electrical Strength of Insulating Materials - Test Methods - Part 1: Tests at Power Frequencies
ISO 7765-2 Plastic Film and Coating - Determination of Impact Resistance by Free Falling Dart Method - Part 2: Instrument Piercing Test
ISO 6603-1 Plastics - Determining the Puncture Impact Behavior of Rigid Plastics - Part 1: Toolless Impact Testing
BS 5438 Flammability Test Standard for Textile Fabrics
EN 61058-1 Switches for Devices - Part 1: Test for General Requirements
ISO 10846-4 Acoustics and Vibration - Laboratory Measurement of Vibro-Acoustic Transfer Properties of Flexible Elements - Part 4: Slewing Motion
ISO 10846-1 Acoustics and Vibration - Laboratory Measurement of Vibrating - Acoustic Transfer Properties of Flexible Elements - Part 1: Principles and Guidelines
ISO 10846-3 Acoustics and Vibration - Laboratory Measurement of Vibro-Acoustic Transfer Properties of Flexible Elements - Part 3: Method for Determining Dynamic Stiffness of Flexible Supports
ISO 10846-2 Acoustics and Vibration - Laboratory Measurement of Vibratory-Acoustic Transfer Properties of Flexible Elements - Part 2: Flip Motion
EN 13529 Products and Systems for the Protection and Repair of Concrete Structures - Standard Test for Resistance to Severe Chemical Attacks
EN 12086 Thermal Insulation Products for Building Applications - Test for Determination of Water Vapor Permeability Properties
ISO 2896 Cellular Plastics, Test for Determination of Hard - Water Absorption
EN 12087 Thermal Insulation Products for Building Applications - Test for Determination of Long-Term Water Absorption by Immersion
EN 1102 Textiles and Textile Products - Combustion Behavior - Curtains and Drapes - Detailed Procedure for Determining Flame Propagation of Vertically Oriented Samples
EN 13772 Textiles and Textile Products - Curtains and Drapes - Measurement of Flame Propagation of Vertically Oriented Samples with Large Ignition Source
EN 62031 LED Modules for General Lighting - Test for Safety Features
EN ISO 12952-2 Textiles - Combustion Behavior of Bedding - Part 2: Specific Test Methods for Ignition of a Lit Cigarette
EN ISO 12952-1 Textile - Evaluation of Flammability of Bedding - Part 1: Ignition Source: Burning Cigarette
ISO 75-1 Plastics - Determination of Deflection Temperature Under Load - General Test Standard
ISO 75-2 Plastics - Determination of Deflection Temperature Under Load - Part 2: Standard Test for Plastics and Ebonite
EN ISO 2808 Paints and Varnishes - Test for Determination of Film Thickness
IEC TR 62778 Application of IEC 62471 Standard for Evaluation of Blue Light Hazard for Light Sources and Luminaires
IEC 60335-2-27 Household and Similar Electrical Appliances - Safety - Part 2-27: Special Rules for Equipment for Skin Exposure to Optical Radiation
EN ISO 105-C06 Textiles - Color Fastness Tests - Part C06: Color Fastness to Domestic and Commercial Laundry
EN ISO 105-X12 Textiles - Color Fastness Tests - Part X12: Color Fastness to Rubbing
EN ISO 23470 Soil Quality - Determination of Effective Cation Exchange Capacity and Exchangeable Cations Using a Kekzamincobalt Trichloride Solution
EN ISO 287 Paper and Cardboard, Determination of Moisture Content of a Lot, Standard Test for Oven Drying Method
EN ISO 845 Cellular Plastics and Rubbers, Standard Test for Determination of Apparent Density
EN 1609 Thermal Insulation Products for Building Applications, Determination of Short-Term Water Absorption by Partial Immersion
EN 1604 Thermal Insulation Products for Building Applications - Determination of Dimensional Stability Under Specified Temperature and Humidity Conditions
EN 998-1 Specification for Masonry Mortar, Part 1: Rendering and Plastering Mortar
EN 12090 Thermal Insulation Products for Building Applications - Determination of Shear Behavior
EN 13471 Thermal Insulation Products for Building Equipment and Industrial Facilities - Determination of Thermal Expansion Coefficient
EN ISO 3582 Flexible Cellular Polymeric Materials - Evaluation of Horizontal Combustion Properties of Small Samples Exposed to a Small Flame
EN 581 Outdoor Furniture, Seating and Tables for Camping, Home and Contract Use
EN ISO 6134 Rubber Hoses and Hose Assemblies for Saturated Vapor - Specification
ISO 75-3 Plastics - Determination of Deflection Temperature Under Load - Part 3: High Strength Thermosetting Laminates and Long Fiber Reinforced Plastics
ISO 1182 Reaction to Fire Tests for Products - Flammability Test
EN ISO 2919 Radiological Protection - Sealed Radioactive Sources - General Requirements and Classification
EN ISO 291 Plastics - Standard Atmospheres for Conditioning and Testing
EN 16436-1 Propane Butane Rubber and Plastic Hoses Pipes for Use with Their Mixtures in the Vapor Phase
ISO 2285 Rubber, Vulcanized or Thermoplastic - Tension Set Under Constant Elongation and Tension Set Under Constant Tensile Load, Determination of Elongation and Creep
EN ISO 4080 Rubber and Plastic Hoses and Hose Assemblies Determination of gas permeability
ISO 19227 Implants for Surgery Test for Cleanliness of Orthopedic Implants
EN 14995 Plastics - Evaluation of Compostability - Test Chart and Specifications
ISO 15540 Ships and Marine Technology Fire Resistance of Non-Metallic Hose Assemblies and Non-Metallic Compensators
ISO 5085-1 Textiles - Determination of Thermal Resistance - Part 1: Low Thermal Resistance
EN 13892-4 Test Methods for Screed Materials - Part 4: Determination of Wear Resistance-BCA
Tests and Procedures for SAE J1677 Carbon Steel and Low Alloy Steel Pipe
ISO 2251 Lined Antistatic Rubber Shoe - Features
AATCC 135 Test Method for Dimensional Changes of Fabrics After Home Washing
EN 986 Textile Floor Coverings, Tiles, Determination of Dimensional Changes and Out-of-Plane Distortions with the Effect of Variable Water and Temperature Conditions
AATCC 150 Test Method for Dimensional Changes of Garments After Home Washing
EN 985 Textile Floor Coverings - Wheelchair Test Standard
AATCC 15 Color Fastness to Perspiration Test Method
EN 594 Timber Structures, Test Methods, Shelf Strength and Rigidity of Timber Frame Wall Panels
AATCC 158 Test Method for Dry Cleaning Dimensional Changes in Perchlorethylene
EN 1522 Windows, Doors, Shutters Bullet Resistance Requirements and Classification
EN 10029 Size and Shape Tolerances for Hot Rolled Steel Plates 3 mm or More Thickness
EN 10163 Delivery Requirements for the Surface Condition of Hot Rolled Steel Plates, Wide Flat Products and Sections
ISO 13468-1 Determination of Total Light Transmittance of Plastics, Transparent Materials - Part 1: Single Beam Instrument
EN 13501-4 Fire Classification of Building Materials and Structural Elements - Part 4: Fire Resistance Tests of Smoke Control Systems
ISO 8536-11 Infusion Equipment for Medical Use Part 11: Disposable Infusion Filters with Pressure Infusion Equipment
IEC EN 60674-2 Specifications for Plastic Films for Electrical Purposes Part 2: Test Methods
DIN 30670 Polyethylene Coatings on Steel Pipes and Fittings - Requirements and Tests
IEC EN 60674-1 Specification for Plastic Films for Electrical Purposes Part 1: Definitions and General Requirements
ISO 8501-1 Preparation of Steel Substrates Before Application of Paints and Related Products - Part 1: Degrees of Rust and Degrees of Readiness
EN ISO 12944-8 Paints and Varnishes - Corrosion Protection of Steel Structures with Protective Paint Systems - Part 8: Specification for New Work and Maintenance
EN ISO 12944-7 Corrosion Protection of Steel Structures with Paints and Varnishes, Protective Paint Systems, Part 7: Execution of Paint Works
IEC 60674-3-1 Plastic Films for Electrical Purposes Part 3-1: Specifications for Individual Materials
EN ISO 4674-1 Rubber or Plastic Coated Fabrics, Determination of Tear Resistance, Part 1: Constant Tear Rate Methods
IEC 60674-3-2 Specifications for Plastic Films for Electrical Purposes Part 3-2: Specifications for Individual Materials
IEC 61300-2-34 Fiber Optic Interconnection Devices and Passive Components, Basic Test and Measurement Procedures - Part 2-34: Tests
IEC 60669-2-5 Switches for Household and Similar Fixed Electrical Installations - Part 2-5: Switches for Use in Home and Building Electronics
ISO 18254-1 Textiles - Method for Detection and Determination of Alkylphenol Ethoxylates (APEO) - Part 1: Method Using HPLC-MS
搛婑喜RF&^歈<騛peo)-saptanmasi-ve-belirlenmesi-icin-yontem---bolum-2:-nplc-kullanan-yontem/">ISO 18254-2 Textiles - Method for Detection and Determination of Alkylphenol Ethoxylates (APEO) - Part 2: Method Using NPLC
ISO 18218-1 Leather - Determination of Ethoxylated Alkylphenols - Part 1: Direct Method
ISO 16373-2 Textiles - Dyes - Part 2: Determination of Extractable Dyestuffs Including Allergenic and Carcinogenic Dyes
EN 17317 Flexible, Textile, Laminate and Modular Mechanically Interlocking Floor Coverings - Light Reflectance Value (LRV) of a Flooring Surface
EN 17130 Textiles and Textile Products - Determination of Dimethylfumarate (DMFu), Method Using Gas Chromatography
EN 12472 Accelerated Wear and Corrosion Simulation Method for Detection of Nickel Release from Coated Parts
ISO 18219 Leather - Standard Test for Determination of Chlorinated Hydrocarbons in Leather
EN 13381-4 Test Methods for Determining the Contribution of Structural Elements to Fire Resistance - Part 4: Passive Protection Applied to Steel Elements
EN 13162 Standard Test for Thermal Insulation Products for Buildings, Factory Made Mineral Wool (MW) Products
ISO 10927 Plastics Matrix Assisted Laser Desorption Ionization Time-of-Flight Mass Spectrometry
ISO 18250-1 Medical Devices, Connectors for Reservoir Distribution Systems for Healthcare Applications, Part 1: General Requirements
Determination of Average Molecular Mass and Mixture Ratio of Poly and Its Derivatives by ISO 19929 Plastics MALDI-TOF-MS
ISO 20418-2 Qualitative and Quantitative Proteomics Analysis of Textile, Some Animal Hair Fibers Part 2: Peptide Detection using MS
ISO 20418-1 Qualitative and Quantitative Proteomics Analysis of Textile, Some Animal Hair Fibers Part 1: Peptide Detection Using Protein Reduction
ISO 20418-3 Textiles Qualitative and Quantitative Proteomics Analysis of Some Animal Hair Fibers Part 3: Peptide Detection Without Protein Reduction
EN ISO 16190 Test Standard for Chamfers in Shoes
EN 60544-4 Determination of the Effects of Ionizing Radiation in Electrical Insulating Materials Part 4: Classification System for Service in Radiation Environments
DIN 17175 Standard Test for Seamless Pipes from Heat Resistant Steels
DIN 30670 Standard Test for Polyethylene Coatings on Steel Pipes and Fittings
DIN 30678 Polypropylene Coatings, Requirements and Tests on Steel Pipes and Fittings
EN 10339 Steel Pipes for Land and Marine Water Pipelines, Internal Liquid Applied Epoxy Primers for Corrosion Protection
Liquid, Epoxy Coatings and Primers for AWWA C210 Steel Water Pipes and Fittings
Fusion Bonded Epoxy Coatings and Primers for AWWA C213 Steel Water Pipes and Fittings
IEC 60335-2-80 Safety of Household and Similar Electrical Appliances - Part 2-80: Special Rules for Fans
EN 1522 Standard Test for Windows, Doors, Shutters, Bullet Resistance, Requirements and Classification
EN 1063 Indoor Glass, Safety Glass, Testing and Classification of Resistance to Bullet Attack
ISO 8295 Plastics, Film and Coating, Standard Test for Determination of Coefficients of Friction
EN ISO 9917-1 Dentistry, Water-Based Cements, Part 1: Powder-Liquid Acid-Based Cements
EN ISO 17304 Dentistry, Polymerization Shrinkage: Method for Determining Polymerization Shrinkage of Polymer-Based Restorative Materials
ISO 9073-18 Test Methods for Textiles, Nonwovens, Part 18: Determination of Tensile Strength and Elongation of Nonwovens
EN 1957 Furniture, Beds and Mattresses, Test Methods for Determining Functional Characteristics and Evaluation Criteria
EN 60544-4 Electrical Insulating Materials, Determination of the Effects of Ionizing Radiation, Part 4: Standard Test for Service in Radiation Environments
DIN 14362 Textiles Methods for Determination of Certain Aromatic Amines Derived from Azo Colorants
EN 13348 Copper and Copper Alloys Seamless, Round Copper Tubes for Medical Gases or Vacuum
EN 124-2 Gutter Covers and Manhole Covers for Vehicle and Pedestrian Areas Part 2: Gutter Covers and Manhole Covers Made of Cast Iron
EN 12790 Child Use and Care Products Test for Reclining Cradles
EN 60068-2-32 Basic Environmental Test Procedures Part 2: Tests; Test ED: Free Fall
EN 15342 Plastics Recycled Plastics Test for Characterization of Polystyrene Recycled Products
EN 1932 Exterior Louvers and Louvers Resistance to Wind Loads Test Method and Performance Criteria
EN 13561 Standard Test for Exterior Louvers and Awnings, Performance Requirements, Including Safety
IEC EN 62275 Cable Management Systems, Cable Ties for Electrical Installations
ISO 5999 Flexible Cellular Polymeric Materials Polyurethane Foam for Load Bearing Applications Except Carpet Backing
EN ISO 2440 Accelerated Aging Tests for Flexible and Rigid Cellular Polymeric Materials
ISO 8307 Flexible Cellular Polymeric Materials Determination of Flexibility by Ball Rebound
ISO 29770 Thermal Insulation Products for Building Applications Thickness Determination for Floating Floor Insulation Products
ISO 15106-3 Plastics, Film and Coating, Determination of Water Vapor Transmission Rate Part 3: Electrolytic Detection Sensor Method
ISO 15105-2 Determination of Gas Transmission Rate for Plastics, Film and Coating Part 2: Equal Pressure Method
EN 13859-2 Flexible Sheets for Waterproofing, Definitions and Properties of Backings Part 2: Backings for Walls
EN 12879 Characterization of Sludges, Determination of Dry Mass Ignition Loss
EN 60851-5 Winding Wires, Test Methods, Part 5: Standard Test for Electrical Properties
EN 13429 Packaging, Standard Test for Reuse
ISO 11040-1 Prefilled Syringes Part 1: Glass Cylinders for Dental Local Anesthetic Cartridges
ISO 11040-2 Prefilled Syringes Part 2:Piston Stoppers for Dental Local Anesthetic Cartridges
EN 16890 Standard Test for Air Filters
ISO 899 Abrasion Test, Creep Test on Plastics
ISO 14325 Test for Chemical Protective Clothing
EN 15870 Adhesives, Standard Test for Determination of Tensile Strength of Butt Joints
ISO 1149-5 Test for Electrostatic Properties of Protective Clothing
EN 14697 Textiles, Towels and Terry Fabrics, Specification and Test Methods
EN 16069 Standard Test for Thermal Insulation Products for Buildings, Factory Made Polyethylene Foam (PEF) Products
EN 1433 Drainage Channels, Classification, Design and Test Requirements for Vehicle and Pedestrian Areas
DIN 5510-2 Preventive Fire Protection in Railway Vehicles, Part 2: Fire Behavior of Materials and Components and Fire Side Effects
EN 13948 Flexible Sheets for Waterproofing, Bitumen, Plastic and Rubber Sheets for Roof Waterproofing, Determination of Resistance to Root Penetration
ISO 9705 Response to Fire Tests, Room Corner Test for Wall and Ceiling Coating Products
ISO 24473 Fire Tests, Open Calorimetry Measurement of Production Rate of Heat and Combustion Products for Fires Up to 40 MW
ISO 16405 Room Corner and Open Calorimeter, Guide to Sampling and Measuring Waste Gas Production Using the FTIR Technique
ISO 14698-1 Clean Rooms and Related Controlled Environments, Biocontamination Control Test Standard
ISO 14698-2 Clean Rooms and Related Controlled Environments, Biocontamination Control, Evaluation of Biocontamination Data
ISO 14644-1 Clean Rooms and Related Controlled Environments, Part 1: Classification of Air Cleanliness by Particulate Concentration
ISO 14644-2 Clean Rooms and Related Controlled Environments, Part 2: Air Cleaning by Particulate Concentration
ISO 14644-3 Clean Rooms and Related Controlled Environments, Part 3: Test Methods
EN 13030 Performance Testing of Buildings Ventilation, Terminals, Shutters Exposed to Simulated Rain
EN 60228 Standard Test for Conductors of Insulated Cables
ISO 289-1 Rubber, Unvulcanized, Determination Using a Shear Disc Viscometer
EN 747-1 Furniture, Bunk Beds and High Beds, Part 1: Requirements for Safety, Strength and Durability
EN 747-2 Furniture, Bunk Beds and High Beds, Part 2: Test Methods
NF P92-503 Building Materials Fire Test (M Score, M1, M2, M3 and M4)
NF P92-504 Building Materials Fire Test, Standard Test for Flame Test Propagation Rate
NF P92-505 Building Materials Fire Test, Drip Test
NF P92-507 Standard Test for Fire Safety, Building, Building Materials, Fire Exits
ISO 105-E04 Textile Color Fastness Tests, Part E04: Color Fastness to Perspiration
EN 14362-2 Textiles, Methods for Determination of Certain Aromatic Amines Derived from Azo Colorants, Part 2: Determination of Use of Specific Azo Colorants
ANSI AMCA 500-L-12 Laboratory Methods for Testing Louvers for Rating
EN ISO 4590 Determination of Volume Percentage of Rigid Cellular Plastics, Open Cells and Closed Cells
EN 1104 Paper and Cardboard Intended to Contact with Foodstuffs, Determination of Transfer of Antimicrobial Components
EN 646 Determination of Color Fastness of Paper and Cardboard, Painted Paper and Cardboard Intended to Contact with Foodstuffs
EN 648 Determination of Fastness of Paper and Cardboard, Fluorescently Bleached Paper and Cardboard Intended to Contact with Foodstuffs
EN 1125 Building Equipment, Panic Exit Devices Operated by a Horizontal Bar for Use on Escape Routes, Requirements and Test Methods
EN 12549 Acoustics, Noise Test Code for Fastener Driving Tools, Engineering Method
EN 1110 Flexible Sheets for Waterproofing, Bitumen Sheets for Roof Waterproofing, Determination of Flow Resistance at High Temperature
EN 12311-1 Flexible Sheets for Waterproofing, Part 1: Bitumen Sheets for Roof Waterproofing, Determination of Tensile Properties
EN 1849-1 Flexible Sheets for Waterproofing, Determination of Thickness and Mass per Unit Area, Bitumen Sheets for Roof Waterproofing
ISO 1133-1 Determination of Melt Mass Flow Rate (MFR) and Melt Volume Flow Rate (MVR) of Plastics, Thermoplastics
EN 60512-14-4 Connectors, Tests and Measurements for Electronic Equipment, Part 14-4: Tightness Tests
EN 410 Glass in Building, Standard Test for Determination of Luminous and Solar Energy Properties of Glass
ISO 9352 Plastics, Standard Test for Determination of Abrasion Resistance of Abrasive Wheels
EN 14338 Paper and Cardboard in Food Contact, Determination of Migration from Paper and Cardboard Using Modified Polyphenylene Oxide (MPPO)
EN 1230-2 Paper and Cardboard Intended for Food Contact, Sensory Analysis, Part 2: Odorless
EN 1186-13 Materials and Objects in Contact with Foodstuffs, Plastics, Part 13: Test Methods for General Migration at High Temperatures
EN 1230-1 Paper and Cardboard Intended for Food Contact, Sensory Analysis, Part 1: Odor
EN 438-2 High Pressure Decorative Laminates (HPL), Sheets Based on Thermosetting Resins, Part 2: Determination of Properties
EN 660-2 Flexible Floor Coverings, Determination of Abrasion Resistance, Part 2: Frick-Taber Test
EN 13329 Laminate Flooring, Elements with a Surface Layer Based on Aminoplastic Thermosetting Resins
EN 13672 Surfaces for Sports Fields, Determination of Abrasion Resistance of Unfilled Synthetic Turf
EN 13696 Wood Flooring, Test Methods for Determining Flexibility and Abrasion Resistance and Impact Resistance
EN 14431 Glassy and Porcelain Enamels, Properties of Enamel Coatings Applied to Architectural Steel Panels
EN 14864 Glassy and Porcelain Enamels, Enamel Coatings Applied to Steel for Writing Surfaces
ISO 7784-2 Paints and Varnishes, Determination of Abrasion Resistance, Part 2: Method with Abrasive Rubber Wheels and Rolling Test Sample
IEC 61010-1 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use, Part 1: General Requirements
ISO 10365 Adhesives, Standard Test for Determining Major Failure Patterns
EN 1886 Standard Test for Ventilation for Buildings, Air Handling Units, Mechanical Performance
EN ISO 22568-4 Foot and Leg Protectors, Requirements for Shoe Components, Part 4: Non-Metallic Puncture-Resistant Inserts
IEC 60227-6 Polyvinyl Chloride Insulated Cables with Nominal Voltages Up to 450-750 V (Included), Part 6: Elevator Cables for Flexible Connections
ISO 1421-1 Rubber or Plastic Coated Fabrics, Determination of Tensile Strength and Elongation at Break
ISO 105-J01 Textiles, Color Fastness Tests, Part J01: Measurement of Color and Color Differences
ISO 1183-3 Plastics, Determination of Density of Non-Cellular Plastics, Gas Pycnometry Method
EN ISO 527-5 Plastics, Determination of Tensile Properties, Part 5: Standard Test for Unidirectional Fibre-Reinforced Plastic Composites
EN 1991-1-2 Eurocode 1: Actions on Structures, Part 1-2: General Actions, Actions on Structures Exposed to Fire
EN 1869 Standard Test for Fire Blankets
EN 11092 Textiles, Physiological Effects, Measurement of Thermal and Water Vapor Resistance Under Steady State Conditions
EN 50620 Standard Test for Electric Cables, Charging Cables for Electric Vehicles
EN 1991-1-3 Eurocode 1, Actions on Structures, Part 1-3: General Actions, Snow Loads
EN 1991-1-4 Eurocode 1, Actions on Structures, General Actions, Standard Test for Wind Actions
EN 12002 Determination of Transverse Deformation for Tile Adhesives, Cement-Based Adhesives and Mortars
ISO TR 18811 Cosmetics, Guidelines for Stability Tests of Cosmetic Products
EN 716-1 Furniture, Cots and Folding Beds for Home Use, Part 1: Safety Requirements
EN 716-2 Furniture, Cots and Folding Beds for Domestic Use, Part 2: Test Methods
EN ISO 105-G03 Textiles, Color 絼?枅倏找:饼塷哣t鑟JAM`鮏Fastness Tests, Part G03: Color Fastness to Ozone in the Atmosphere
ISO 1219 Fluid Power Systems and Components, Graphic Symbols and Circuit Diagrams
ISO 7270-1 Analysis by Rubber, Pyrolytic Gas Chromatographic Methods, Part 1: Identification of Polymers
ISO 4650 Rubber, Identification, Infrared Spectrometric Methods
ISO 9924-1 Rubber and Rubber Products, Part 1: Butadiene, Ethylene-Propylene Copolymer and Terpolymer, Isobutene-Isoprene and Styrene-Butadiene Rubbers
ISO 9924-2 Rubber and Rubber Products, Part 2: Acrylonitrile-Butadiene and Halobutyl Rubbers
ISO 9924-3 Rubber and Rubber Products, Part 3: Hydrocarbon Rubbers, Halogenated Rubbers and Polysiloxane Rubbers After Extraction
ISO 1408 Rubber, Determination of Carbon Black Content, Pyrolytic and Chemical Decomposition Methods
ISO 247 Rubber, Standard Test for Ash Determination
ISO 188 Rubber, Vulcanized or Thermoplastic, Accelerated Aging and Heat Resistance Tests
ISO 105-A02 Textiles, Color Fastness Tests, Part A02: Gray Scale to Evaluate Change in Color
ISO 976 Rubber and Plastics, Polymer Dispersions and Rubber Latexes, Determination of PH
ISO 2135 Anodizing of Aluminum and Its Alloys, Light Fastness of Colored Anodic Oxidation Coatings Using Artificial Light
EN ISO 3823-1 Dental Rotary Tools, Burs, Part 1: Standard Test for Steel and Carbide Burs
DIN 54837 Standard Test for Determining Combustion Behavior with a Gas Burner
ISO 7491 Dental materials, Determination of Color Stability
EN 62192 Live Working, Insulation Ropes
EN 13655 Plastics, Post-Use Recoverable Thermoplastic Mulch Films for Use in Agriculture and Gardening
JIS K 6261 Determination of Rubber, Vulcanized or Thermoplastic, Low Temperature Properties
JIS K 6257 Determination of Heat-Aging Properties of Rubber, Vulcanized or Thermoplastic
EN 15936 Determination of Total Organic Carbon by Sludge, Treated Biowaste, Soil and Waste, Dry Incineration
EN 1745 Wall and Wall Products, Methods for Determining Thermal Properties
EN 12880 Characterization of Sludges, Determination of Dry Residue and Water Content
DIN 53507 Rubber and Elastomers, Determination of Tear Strength of Elastomers, Trousers Test Piece
ISO 2244 Packaging, Complete, Filled Transport Packages and Unit Loads, Horizontal Impact Tests
NFPA 1964 Standard Test for Spray Nozzles
EN ISO 12945-1 Textiles, Determination of Pilling and Pilling Tendency on the Surface of Fabric, Part 1: Pilling Box Method
EN 520 Drywall Sheets, Definitions, Requirements and Test Methods
DIN 66084 Classification of Combustion Behavior of Upholstered Compounds
BS 476-6 Fire Testing for Building Products and Structural Elements
BS 476-7 Fire Testing for Building Material
JIS P 8117 Paper and Board, Determination of Air Permeability and Air Resistance (Mid Range), Gurley Method
ISO 527-3 Plastics, Determination of Tensile Properties, Part 3: Standard Test for Films and Sheets
EN 15815 Polymer Modified Bitumen Thick Coatings for Waterproofing, Compression Resistance
California TB 133 Flammability Test Procedure for Living Furniture for Public Use
ISO 105-E03 Textiles Color Fastness Tests Color Fastness to Chlorinated Water (Swimming Pool Water)
EN 4892-3 Plastics, Methods of Exposure to Laboratory Light Sources Fluorescent UV Lamps Test
EN 1871 Road Marking Materials
Standard Test Method for AASHTO T 250 Thermoplastic Traffic Line Material
AASHTO M249 Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form)
EN ISO 17225-3 Solid Biofuels, Fuel Properties and Classes, Graded Wood Briquettes
ISO 17225-4 Solid Biofuels, Fuel Properties and Grades Grade Chips
EN 60598-1 Luminaires, Part 1: General Requirements and Tests
EN ISO 8031 鈥嬧€婻ubber and Plastic Hoses and Hose Assemblies, Determination of Electrical Resistance and Conductivity
AATCC EP 1 Grayscale Evaluation Procedure for Color Change
EN ISO CIE 11664-4 Colorimetry, Part 4: Standard Test for CIE Color Space
ISO CIE 11664-6 Colorimetry, Part 6: Standard Test for Color Difference Formula
EN ISO 7751 Rubber and Plastic Hoses, Working Pressure Resistance and Burst Pressure Ratios
EN 12127 Textile, Fabric, Determination of Mass Per Unit Area Using Small Samples
ISO 5084 Textiles, Determination of Thickness of Textiles and Textile Products
ISO 1402 Rubber and Plastic Hoses, Hose Sets Hydrostatic Test
ISO 11114-4 Portable Gas Cylinders, Compatibility of Valve Materials
ISO 105-E01 Textiles, Color Fastness Tests, Part E01: Color Fastness to Water
ISO 11114-2 Portable Gas Cylinders, Compatibility of Valve Materials with Gas Content Non-Metallic Materials
Standard Test for API SPEC 15HR High Pressure Fiberglass Line Pipe
EN ISO 2815 Paints and Varnishes
EN ISO 1520 Paints and Varnishes Standard Test for Pitting
DTRF 150608-D Standard Test for Staining Property
EN 12225 Geotextiles and Geotextile Related Products, Method of Determining Microbiological Resistance by Soil Burying Test
ISO 8130-13 Coating Powders Particle Size Analysis by Laser Diffraction
ISO 8130-5 Determination of Flow Properties of Coating Powders, Powder Air Mixture
EN 12983-1 Domestic Cooking Appliances for Use on Pots, Stoves or Cooktops, Part 1: General Requirements
EN 13750 Domestic Water Heaters, Requirements and Test Methods for Use on Hob
IEC 60512-14-5 Connectors for Electronic Equipment, Part 14-5: Tightness Tests, Test 14e: Low Air Pressure Immersion
EN 13083 Tanks and Service Equipment Bottom Loading and Unloading Adapter for the Transport of Dangerous Goods
IDFB Part 12 Standard Test for Down and Down Species
EN 12934 Standard Test for Feather and Down
VDMA 24364 Standard Test for Paint Wetting Agents
EN ISO 1716 Tests for Response to Fire for Products, Determination of Gross Heat of Combustion (Calorific Value)
EN 12190 Protection and Repair of Concrete Structures, Determination of Compressive Strength of Repair Mortar
CTOD Test (Crack Tip Opening Displacement Test)
ISO 9080 Plastic Pipe and Duct Systems, Determination of Hydrostatic Strength of Tubular Thermoplastic Materials by Extrapolation
ISO 4427 Plastic Pipe Systems for Pressurized Water Supply, Drainage and Sewage, Polyethylene
ISO 4437 Plastic Pipe Systems for the Supply of Gaseous Fuels, Polyethylene
EN 12201 Plastic Pipe Systems for Water Supply and Pressure Drainage and Sewage, Polyethylene
EN 1555 荊哼$裷檄`-睴圾撸6裐@{f5Plastic Pipe Systems for the Supply of Gaseous Fuels, Polyethylene
EN 1015-17 Test for Masonry Mortar, Determination of Water-Soluble Chloride Content of Fresh Mortars
EN 13295 Products and Systems for the Protection and Repair of Concrete Structures, Determination of Resistance to Carbonation
EN ISO 1043 Standard Test for Plastics, Symbols and Abbreviated Terms
EN ISO 6383-2 Plastics, Film and Coating, Determination of Tear Resistance, Part 2: The Elmendorf Method
ISO TR 2801 Protective Clothing Against Heat and Flame - Selection, Care and Use of Protective Clothing
EN 15102 Decorative Wall Coverings
EN ISO 7765-1 Plastic Film and Coating, Determination of Impact Resistance by Free Falling Dart Method, Part 1: Ladder Methods
EN 233 Wallcoverings in Rolls - Finished Wallpapers, Wall Vinyls and Plastic Wallcoverings
EN 234 Wall Coverings in Rolls - Characteristics of Wall Coverings for Subsequent Decoration
EN 266 Rolled Wall Coverings - Specifications for Textile Wall Coverings
EN 13085 Wall Cladding - Technical Specifications for Cork Rolls
EN 259-1 Wall Coverings in Rolls - Heavy Duty Wall Coverings
EN ISO 20105-A02 Textiles, Color Fastness Tests, Part A02: Gray Scale for Evaluating Change in Color
EN 12608-1 Non-Plasticized Profiles for Window and Door Manufacturing , Uncoated PVC-U profiles with Light Colored Surfaces
IEC 62631-2 Dielectric and Resistivity Properties of Solid Insulating Materials, Part 2: Relative Permeability and Dissipation Factor
EN 12405-3 Gas Meters - Conversion Devices
EN 1288-3 Glass in Building, Determination of the Bending Strength of Glass, Part 3: Test with a Two-Point Supported Sample
EN 12150-1 Indoor Glass, Thermally Toughened Soda Lime Silicate Safety Glass, Part 1: Description and Description
EN 14179-1 Indoor Glass, Heat Soaked, Thermally Toughened Soda Lime Silicate Safety Glass, Part 1: Description and Description
EN 1863-2 Indoor Glass, Heat Strengthened Soda Lime Silicate Glass, Part 2: Evaluation of Compliance
ISO 1974 Paper, Determination of Tear Resistance - Elmendorf Method
ISO 2493 Paper and Cardboard - Determination of Flexural Strength
ASTM E1461 Standard Test Method for Thermal Dissipation of Solids by Flash Method
ISO 22007-1 Plastics, Determination of Thermal Conductivity and Thermal Dissipation, Part 1: General Principles
EN 12765 Classification of Thermosetting Wood Adhesives for Non-Structural Applications
Standard Test for SAE 4140 Steel, Round Bar
EN ISO 4920 Textile Fabrics - Determination of Resistance to Surface Wetting
EN ISO 14419 Textile, Oil Repellency - Hydrocarbon Resistance Test
EN 12024 Self-Adhesive Tapes, Measurement of Resistance to High Temperature and Humidity
ISO 9151 Heat and Flame Protective Clothing - Determination of Heat Conduction when Exposure to Flame
EN ISO 13937-4 Textiles, Tear Properties of Fabrics, Part 4: Determination of Tear Strength of Tongue-Shaped Test Samples
EN ISO 13937-1 Textiles, Tear Properties of Fabrics, Part 1: Ballistic Pendulum Method (Elmendorf), Determination of Tear Force
ISO 105-E02 Textiles, Color Fastness Tests, Part E02: Color Fastness to Sea Water
BS 476-22 Fire Tests on Building Materials and Structures, Part 22: Fire Resistance of Non-Load Bearing Elements of the Structure
BS 476-20 Fire Tests on Building Materials and Structures, Part 20. Determination of Fire Resistance of Structural Elements
NFC 17-102 Standard Test for Lightning Protection
IEEE C57.12.31 Standard for Pole Mounted Equipment
IEC 61111 Live Working, Standard Test for Electrical Insulation Membrane
EN 197-1 Cement, Part 1: Composition, Properties and Compliance Criteria for Common Cements
EN 862 Childproof Packaging - Test for Non-Resealable Packages for Non-Pharmaceutical Products
EN 196-10 Cement Test Methods, Part 10: Determination of Water-Soluble Chromium Content in Cement
ISO 4628-4 Paints and Varnishes - Evaluation of Deterioration of Coatings - Evaluation of Cracking Degree
DIN 53923 Textile Tests, Determination of Water Absorption of Textile Fabrics
DIN 55662 Paints and Varnishes, Coatings for the Automotive Industry, Resistance to Pressurized Water Spray
ISO 105-B04 Textiles, Color Fastness Tests, Part B04: Color Fastness to Artificial Weathering, Xenon Arc Fading Lamp Test
ISO 16906 Flexible Floor Coverings, Determination of Seam Strength
EN 31092 Textile - Determination of Physiological Properties
EN ISO 536 Paper and Cardboard - Determination of Weight
EN ISO 2759 Enclosure - Determination of Burst Strength
EN 13553 Flexible Floor Coverings, Polyvinyl Chloride Floor Coverings for Use in Special Wet Areas
EN ISO 10456 Construction Materials and Products - Tabled Design Values, Determination of Declared and Design Thermal Values
TAPPI T 410 Standard Test for Weight (Weight Per Unit Area) of Paper and Cardboard
EN 1366-3 Fire Resistance Tests for Service Installations, Penetration Gaskets
IEC EN 61242 Electrical Accessories - Cable Reels for Household and Similar Purposes
EN 14988 Children's Highchairs - Requirements and Test Methods
EN 12230 Surfaces for Sports Fields - Determination of Tensile Properties of Synthetic Sports Surfaces
EN ISO 20126 Dentistry - Manual Toothbrushes - General Test Methods
EN 13393 Standard Test for Packaging, Specifications for Edge Protectors
ISO 4638 Polymeric Materials, Cellular Flexibility, Determination of Air Flow Permeability
EN 14350 Child Care Supplies, Drinking Equipment - Safety Requirements and Test Methods
IEC EN 61033 Test for Bonding Strength of Impregnating Agents to Enameled Wire Substrate
EN 12616 Surfaces for Sports Fields - Determination of Water Leakage Rate
EN 14707 Standard Test for Thermal Insulation Products for Building Equipment and Industrial Facilities
EN ISO 13438 Geosynthetics - Test to Determine Oxidation Resistance of Geotextiles and Geotextile-related Products
EN 13501-5 Fire Classification of Building Materials and Structural Elements, Part 5: Standard Test for Exposure of Roofs to External Fire
EN 14030 Geotextiles and Geotextile Related Products - Screening Test to Determine Resistance to Acid and Alkaline Liquids
EN ISO 16000-10 Indoor Air, Part 10: Determination of Emissions of Volatile Organic Compounds from Building Products and Flooring
EN 15187 Furniture, Standard Test for Evaluation of the Effect of Light Exposure
EN 14466 Standard Test for Fire Fighting Pumps, Portable Pumps, Safety and Performance Requirements
ISO 4897 Cellular Plastics獋熍??5O€QU?[?K=H - Determination of Coefficient of Linear Thermal Expansion of Solid Materials at Lower Ambient Temperatures
ISO 6603-2 Puncture Impact Behavior of Plastics
ISO 4603 Textile Glass, Woven Fabrics, Standard Test for Determination of Thickness
EN ISO 2286-2 Rubber or Plastic Coated Fabrics, Determination of Roll Properties, Part 2: Standard Test for Mass Per Unit Area of 鈥嬧€婥oating
EN 1625 Textiles and Textile Products, Combustion Behavior of Industrial and Technical Textiles
EN ISO 1421 Rubber or Plastic Coated Fabrics, Determination of Tensile Strength and Elongation at Break
AATCC 201 Drying Speed 鈥嬧€媜f Fabrics - Heated Plate Method
AAMA 2605 Standard Test for Superior Performance Coatings
BS 7959-1 Materials Used to Control Liquid Spills, Part 1: Determination of Absorbency
IEC 62192 Live Working, Standard Test for Insulation Ropes
EN ISO 1856 Flexible Cellular Polymeric Materials, Standard Test for Determination of Compression Set
EN ISO 13477 Thermoplastic Pipes for the Transport of Fluids, Determination of Resistance to Rapid Crack Propagation (RCP), Small Scale Steady State Test
ISO 2470 Paper, Cardboard and Pulp, Measurement of Scattered Blue Reflection Factor
EN 12625-4 Tissue Paper and Tissue Products, Part 4: Determination of Tensile Strength, Elongation at Break, and Tensile Energy Absorption
EN 12625-5 Tissue Paper and Tissue Products, Part 5: Determination of Wet Tensile Strength
EN 12625-6 Tissue Paper and Tissue Products, Part 6: Standard Test for Determination of Weight
EN 12625-8 Tissue and Tissue Products, Part 8: Water Absorption Time and Water Absorption Capacity, Basket Immersion Test Method
EN 12281 Print and Business Paper, Copy Paper Requirements for Dry Toner Imaging Operations
EN 14889-2 Fibers for Concrete, Part 2: Standard Test for Polymer Fibers, Definitions, Properties and Conformity
EN ISO 3037 Corrugated Cardboard, Determination of Edge Crush Resistance (Waxless Edge Method)
Edge Compressive Strength of TAPPI T811 Corrugated Board (Short Column Test)
ISO 815-2 Rubber, Vulcanized or Thermoplastic - Determination of Compression Set
EN 10223-7 Steel Wire and Wire Products for Fencing and Mesh - Steel Wire Welded Panels for Fencing
EN 12365-4 Building Hardware, Gasket and Insulation for Doors, Windows, Shutters and Curtain Walls
ISO 8318 Vertical Vibration Test on Filled Transport Packages
IEC EN 60800 Tensioned Heating Cables for Comfort Heating and Prevention of Ice Formation
IEC 60669-2-6 Switches for Household and Similar Fixed Electrical Installations, Part 2-6: Fireman's Switches for Exterior and Interior Signs and Luminaires
ISO 11358, Standard Test for Thermogravimetry (TG) of Plastics, Polymers
EN 54-2 Fire Detection and Fire Alarm System - Control and Indicator Equipment
ISO 20158 Textiles - Determination of Water Absorption Time and Water Absorption Capacity of Textile Fabrics
ISO 15002 Flow Meters for Connection to Terminal Units of Medical Gas Pipeline Systems
EN 15002 Waste Characterization - Preparation of Test Sections from Laboratory Sample
IEC EN 60335-2-65 Household and Similar Electrical Appliances - Test for Air Purifiers
IEC EN 62233 Measurement Methods for Electromagnetic Fields of Household Appliances and Similar Devices Related to Human Exposure
JIS A 1435 Test Method for Freezing and Thawing Resistance of Exterior Materials of Buildings
EN 14904 Standard Test for Indoor Surfaces for Multi-Sport Use
ISO 2248 Packaging 鈥 Fully Filled Transport Packages 鈥 Vertical Drop Test
JIS T 9001 Standard Test for Performance Requirements for Medical Face Masks and Non-Medical Face Masks
ISO 4180 Packaging 鈥 Completed, Filled Transport Packages - Performance Testing
ISO 1496-3 Cargo Containers - Testing Tank Containers for Liquids, Gases and Dry Bulk Cargo
EN 12235 Surfaces for Sports Fields - Test for Determination of Vertical Ball Behavior
EN 14808 Surfaces for Sports Fields - Test for Determination of Shock Absorption
EN 14809 Surfaces for Sports Fields - Determination of Vertical Deformation
EN ISO 11664-2 Colorimetry, Part 2: Standard Test for CIE Standard Illuminators
ISO CIE 11664-3 Colorimetry, Part 3: Standard Test for CIE Tristimulus Values
ISO CIE 11664-5 Colorimetry, Part 5: Standard Test for CIE Color Space and Uniform Chromaticity Scale Diagram
DIN 14811 Standard Test for Fire Extinguishing Hoses, Non-Leaking Straight Distribution Hoses and Hose Assemblies for Pumps and Vehicles
ISO 6486-2 Test for Ceramics, Glass-Ceramics and Dinnerware in Contact with Food
Test for ISO 7380-1 Concave Head Imbus Bolt
EN 13564-1 Flood Protection Devices for Buildings, Part 1: Standard Test for Requirements
Test for ISO 7380-2 Flanged Dummy Head Imbus
ISO 4048 Standard Test for Leather, Chemical Tests, Determination of Substance Soluble in Dichloromethane and Free Fatty Acid Content
ISO 2859-1 Sampling for Inspection and Test - Acceptable Quality Limit
ISO 2859-2 Sampling for Inspection and Test - Indexed Sampling for Isolated Lot Inspection by Limiting Quality
ISO 2859-3 Sampling for Inspection and Test - Skip Sampling
ISO 12625-4 Tissues and Paper Products, Part 4: Standard Test for Determination of Tensile Strength, Tensile Strength at Maximum, and Tensile Energy Absorption
ISO 12625-5 Tissue Paper and Tissue Products, Part 5: Standard Test for Determination of Wet Tensile Strength
ISO 13061-3 Physical and Mechanical Properties of Wood, Part 3: Standard Test for Determination of Final Strength in Static Bending
ISO 13910 Structural Timber, Characteristic Values 鈥嬧€媜f Strength Grade Timber, Sampling Test Standard
ISO 21182 Lightweight Conveyor Belts Standard Test for Determination of Coefficient of Friction
TAPPI T 456 Standard Test for Tensile Tensile Strength of Saturated Paper and Board
TAPPI T 494 Standard Test for Tensile Properties of Paper and Cardboard (Using Fixed Extension Apparatus)
EN 13823 Reaction to Fire Tests for Building Products
EN 927-6 Paints and Varnishes - Testing for Outdoor Wood and Coating Materials
EN 60684-2 Standard Test for Flexible Insulation Sheath
EN ISO 7783-2 Paints and Varnishes - Test for Exterior Wall and Concrete Coating Materials
EN 15457 Paints and Varnishes - Test for Film Protectors in an Anti-Fungal Coating
EN 15458 Paints and Varnishes - Test for Film Protectors in a Coating Against Algae
EN 1062-7 Paints and Varnishes - Test for Determination of Crack Bridging Properties
EN ISO 12944-2 Paints and Varnishes - Test for Protective Paint Systems of Steel Structures
EN 13300 Paints and Varnishes - Test for Waterborne Coatings 紡鐫?[鼠U~橰郭娃'e鷑焹Wfor Interior Walls and Ceilings
EN 1062-1 Paints and Varnishes - Test for Coating Materials for Exterior Wall and Concrete
ISO 17556 Plastics - Test for Determination of Ultimate Aerobic Biodegradability of Plastic Materials in Soil
ISO 14896 Standard Test for Determination of Plastics, Polyurethane Raw Materials, Isocyanate Content
ISO 14897 Plastics, Polyols for Use in the Production of Polyurethane, Standard Test for Determination of Water Content
ISO 6504-1 Paints and Varnishes, Determination of Covering Power, Part 1: Standard Test for the Kubelka-Munk Method for White and Light Color Paints
EN 11507 Standard Test for Paints and Varnishes, Exposure of Coatings to Artificial Weathering, Exposure to Fluorescent UV Lamps and Water
EN 13537 Test for Sleeping Bags
EN 1279-2 Building Glazing - Test for Insulating Glass Units
EN 1279-3 Building Glazing - Test for Gas Leakage Rate and Gas Concentration Tolerances
ISO 13938-2 Textiles, Burst Properties of Fabrics, Part 2: Standard Test for Burst Strength
ISO 105-X12 Textiles, Color Fastness Tests, Part X12: Color Fastness to Rubbing Test Standard
UNE 48254 Paints and Varnishes Standard Test for Determination of Forced Reflection Curves of Paints
ISO 1419 Standard Test for Accelerated Aging of Rubber or Plastic Coated Fabrics
EN ISO 105-C02 Textiles, Color Fastness Tests, Part C02: Standard Test for Color Fastness to Washing
UN 38.3 Standard Test for Lithium Batteries
CNH 82032291 Standard Test for Mounting Properties of High Pressure Hoses
ISO 1407 Standard Test for Determination of Rubber, Solvent Extract
ISO 14309 Rubber, Vulcanized or Thermoplastic, Standard Test for Determination of Volume and Surface Resistance
ISO 34-2 Rubber, Vulcanized or Thermoplastic, Determination of Tear Strength, Part 2: Standard Test for Small (Delft) Test Pieces
ISO 4664 Rubber, Vulcanized or Thermoplastic, Standard Test for Determination of Dynamic Properties
ISO 22007-2 Plastics, Determination of Thermal Conductivity and Thermal Dissipation, Part 2: Standard Test for Transient Plane Heat Welding
UL 181 UL Standard for Safety Factory Made Air Ducts and Air Connectors
SAE J964 Test for Measuring Fog and Reflection of Mirrors
EN ISO 5470-2 Rubber or Plastic Coated Fabrics - Martindale Test for Abrasive
ISO 1432 Rubber, Vulcanized - Test for Low Temperature Curing
ISO 14309 Rubber, Vulcanized Rubber, Thermoplastic - Test for Volume or Surface Resistance
EN ISO 22007-3 Plastics - Test for Temperature Wave Analysis
EN ISO 22007-4 Plastics - Test for Laser Flash Method
BS 6953 Test for Layout, Survey and Survey Procedures in Building Construction
ISO 21930 Testing for Sustainability in Buildings and Civil Engineering Business
EN 15804 Construction Works - Testing of Construction Materials for Product Category
EN 13169 Test for Thermal Insulation Materials in Buildings
EN 16354 Laminate Floor Coverings - Test for Underlayment
EN ISO 10684 Fasteners - Test for Hot Dip Galvanized Coatings
CEN TS 14416 Geosynthetic Barriers - Test to Determine Root Resistance
EN 14619 Wheeled Sporting Goods - Test for Kick Scooters
EN 10270-1 Test for Mechanical Springs Steel Wire
ISO 13402 Surgical and Dental Hand instruments, Standard Test for Determination of Resistance to Autoclaving, Corrosion and Thermal Exposure
EN 13773 Textile Products - Combustion Behavior
AATCC TM 147 Antibacterial Activity of Textile Materials
DIN EN 13501-1 Fire Classification of Building Materials and Structural Elements, Part 1: Reaction to Fire Test Standard
DIN 488-2 Reinforcing Steels, Standard Test for Reinforcing Steel Bars
IEC 167 Test Methods for Determining Insulation Resistance of Solid Insulation Materials
EN 1991-1-5 Eurocode 1: Actions on Structures, Part 1-5: General Actions, Standard Test for Thermal Actions
EN 1991-1-6 Eurocode 1, Actions on Structures Part 1-6: Standard Test for Actions During Execution
BS 3424-5 Testing of Coated Fabrics, Methods 7A, 7B, and 7C, Test Standard for Determining Tear Strength
ISO 2695 Standard Test for Fiber Construction Boards, General Purpose Rigid and Medium Boards, Quality Properties
ISO 15755 Paper and Cardboard, Standard Test for Prediction of Contrasts
EN 12600 Indoor Glass, Pendulum Test, Impact Test Method and Classification for Flat Glass
EN 14179-2 Standard Test for Indoor Glass, Heat Soaked, Thermally Toughened Soda Lime Silicate Safety Glass
EN 12004-1 Adhesives for Ceramic Tiles, Part 1: Requirements, Standard Test for Evaluation of Performance Stability
IEC 61340-4-1 Electrostatics, Part 4-1: Special Applications, Standard Test for Electrical Resistance of Floor Coverings and Installed Floors
IEC TR 61340-1 Electrostatic, Part 1: Standard Test for Electrostatic Phenomena, Principles and Measurements
EN 14303 Standard Test for Thermal Insulation Products for Building Equipment and Industrial Facilities, Factory Made Mineral Wool (MW) Products
EN 62852 Connectors, Safety Requirements Test Standard for DC Application in Photovoltaic Systems
EN 61215 Standard Test for Terrestrial Photovoltaic (PV) Modules, Design Qualification and Type Approval
ISO 8256 Plastics - Test for Tensile-Impact Strength
ISO 11403-1 Plastics, Presentation of Comparable Multipoint Data, Part 1: Mechanical Properties Test Standard
AATCC 195 Standard Test Method for Liquid Moisture Management Properties of Textile Fabrics
ISO 6743-9 Lubricants, Industrial Lubricants and Related Products (Class L), Classification, Part 9: Family X (Greases) Test Standard
DIN 51825 Standard Test for Lubricants, Lubricant Greases K, Classification and Requirements
ISO 6743-12 Lubricants, Industrial Lubricants and Related Products (class L), Classification, Part 12: Q Family Test Standard
ISO 2137 Standard Test for Determination of Cone Penetration of Petroleum Products and Lubricants, Lubricating Greases and Petrolatum
DIN 51502 Standard Test for Determination of Lubricants and Marking of Lubricant Containers, Equipment and Lubrication Points
DIN 51807-1 Testing of Lubricants, Behavior of Lubricating Greases in the Presence of Water, Part 1: Standard Method for Static Testing
DIN 51805 Determination of Flow Pressure of Lubricating Greases, Kesternich Technique Test Standard
Testing the Anti-Corrosion Properties of DIN 51802 Lubricating Greases with the SKF Emcor Method
DIN 51811 Testing of Lubricants, Testing of the Corrosive Effect of Lubricating Greases on Copper, Copper Strip Test
DIN 51350 Testing of Lubricants, Testing in a Four-Ball Apparatus, Part 1: Standard Test for General Operating 唰?T6蓱枆榶柆佩▊倵搣侳褻Principles
EN ISO 9053-2 Acoustics, Determination of Airflow Resistance, Part 2: Standard Test for Variable Airflow Method
NFPA 259 Test for Potential Heat of Building Materials
FED-STD 191A Test for Textile Woven, Tape and Knitted Products
CEN TS 16637-2 Construction Products, Evaluation of the Release of Hazardous Substances, Part 2: Horizontal Dynamic Surface Leaching Test Standard
EN 298 Test for Gas or Liquid Fuel Burners
EN 809 Test for Pumps and Pump Units for Liquids
EN 80369-5 Test for Small Diameter Connectors for Liquids and Gases in Healthcare Applications
EN 1296 Standard Test for Flexible Sheets for Waterproofing, Bitumen, Plastic and Rubber Sheets for Roofing
EN 14769 Bitumen and Bituminous Binders, Accelerated Long-Term Aging Test Standard with Pressure Aging Containers (PAV)
EN 12280-1 Rubber or Plastic Coated Fabrics, Accelerated Aging Tests, Part 1: Standard Test for Thermal Aging
EN 12280-2 Rubber or Plastic Coated Fabrics, Accelerated Aging Tests, Part 2: Physical Aging Test Standard
EN 12280-3 Rubber or Plastic Coated Fabrics, Accelerated Aging Tests, Part 3: Standard Test for Environmental Aging
ISO 6934 Steel Test Standard for Prestressing Concrete
ISO 6427 Plastics, Standard Test for Determination of Extractable Substances with Organic Solvents
ISO 3865 Test Methods for Dyeing in Contact with Rubber, Vulcanized or Thermoplastic, Organic Material
EN ISO 13433 Geosynthetics 鈥 Dynamic Perforation Test
EN ISO 11058 Test for Geosynthetics and Geotextile Related Products
ISO 10319 Geosynthetics 鈥 Wide Width Tensile Test
ISO 25537 Indoor Glass - Silver Coating, Flat Glass, Mirror Test
EN 12666-1 Standard Test for Plastic Pipe Systems, Polyethylene (PE) for Unpressurized Underground Drainage and Sewage
EN 12588 Standard Test for Lead and Lead Alloys, Rolled Lead Sheet for Construction Purposes
EN 20-2 Standard Test for Determination of Protective Efficacy against Wood Preservatives, Lyctus Brunneus (Stephens)
EN 275 Wood Guards, Determination of Protective Efficacy Standard Test Against Marine Piercings
EN 12562 Textiles, Para-Aramid Multifilament Yarns, Test Methods
EN 10264-1 Steel Wire and Wire Products, Steel Wire for Ropes, Part 1: General Requirements
EN 10264-2 Steel Wire and Wire Products, Steel Wire for Ropes, Part 2: Cold Drawn Unalloyed Steel Wire for Ropes for General Applications
EN 1279-5 Glass in Building, Insulating Glass Units, Part 5: Product Standard
ISO 12947-1 Textiles, Determination of Abrasion Resistance of Fabrics by Martindale Method, Part 1: Martindale Abrasion Tester
IPC TM-650-2.4.6 Standard Test for Hot Oil
ISO 13468-2 Plastics - Test for Dual Beam Instrument
ISO 14782 Plastics - Turbidity Test of Transparent Materials
ISO 489 Plastics - Test for Refractive Index
EN 717-2 Wood Based Panels, Determination of Formaldehyde Release, Part 2: Standard Test for Formaldehyde Release by Gas Analysis Method
EN 717-3 Wood Based Panels, Determination of Formaldehyde Release, Part 3: Standard Test for Formaldehyde Release by Bottle Method
EN ISO 13937-2 Textiles - Test for Tear Properties of Fabrics
EN 15836-1 Standard Test for Plastics, Plasticized Polyvinyl Chloride (PVC-P) Membranes for Underground Swimming Pools
ISO 11990 Lasers and Laser Related Equipment, Determination of Laser Resistance of Tracheal Tube Shaft and Tracheal Tube Cuffs
ISO 8611-1 Pallets for Material Handling, Flat Pallets, Part 1: Test Methods
ISO 8611-2 Pallets, Flat Pallets for Material Handling, Part 2: Selection of Performance Requirements and Tests
ISO 8611-3 Pallets for Material Handling, Flat Pallets, Part 3: Standard Test for Maximum Working Loads
EN ISO 12625-6 Tissue and Tissue Products, Part 6: Standard Test for Determination of Weight
ISO 12625-7 Tissue Paper and Tissue Products, Part 7: Standard Test for Determination of Optical Properties
ISO 974 Plastics, Standard Test for Determination of Fragility Temperature by Impact
EN ISO 14616 Plastics - Test for Shrinkage Stress of Polyethylene, Ethylene Copolymers
ISO 3683-2 Test for Magnetic Flaw Detection Inks and Powders
EN 927-6 Standard Test for Paints and Varnishes, Coating Materials and Coating Systems for Outdoor Wood
EN ISO 11357-2 Plastics - Test for Differential Scanning Calorimetry
CEN TS 13130-13 Materials and Objects in Contact with Foodstuffs - Test for Plastics
EN 645 Test for Paper and Cardboard Intended to Contact with Foodstuffs
EN 647 Paper and Cardboard Intended to Contact with Foodstuffs - Test for Preparation of Water Extract
EN 1541 Paper and Cardboard Intended to Contact with Foodstuffs - Test for Determination of Formaldehyde in an Aqueous Extract
EN 14719 Pulp, Paper and Board - Test for Determination of Diisopropylnaphthalene Content
ANSI A 118.15 American National Standard Specifications for Improved Modified Dry-Set Cement Mortar
EN 15519 Paper and Cardboard Intended to Contact with Foodstuffs - Test for Preparation of Organic Solvent Extract
EN 15845 Paper and Cardboard - Test for Determination of Cytotoxicity of Aqueous Extracts
EN 17163 Paper and Cardboard - Test for Determination of Aromatic Amines in Water Extract by LC-MS Method
EN 8784-1 Cellulose, Paper and Cardboard - Test for Microbiological Examination
ISO 22717 Cosmetic - Test for Detection of Pseudomonas Aeruginosa
ISO 18416 Cosmetics - Test for Detection of Candida Albicans
EN ISO 22718 Cosmetic - Test for Detection of Staphylococcus Aureus
EN 998-2 Specifications for Masonry Mortar, Part 2: Standard Test for Masonry Mortar
EN 1015-11 Test Methods for Masonry Mortar, Determination of Flexural and Compressive Strength of Hardened Mortar
EN 1015-10 Test Methods for Masonry Mortar, Part 10: Standard Test for Determination of Dry Bulk Density of Hardened Mortar
EN 1015-19 Test Methods for Masonry Mortar, Standard Test for Determination of Water Vapor Permeability of Hardened Plaster and Plaster Mortars
EN 1015-18 Test Methods for Masonry Mortar, Part 18: Standard Test for Determination of Water Absorption Coefficient Due to Capillary Effect of Hardened Mortar
EN 13057 Products and Systems for the Protection and Repair of Concrete Structures, Test Methods, Standard Test for Determination of Capillary Suction Resistance
EN 1542 Products and Systems for the Protection and Repair of Concrete Structures, Standard Test for the Measurement of Tensile and Adhesive Strength
EN 13412 Products and Systems for the Protection and Repair of Concrete Structures, Standard Test for Determination of Compressive Modulus of Elasticity
EN 13687-1 Products and Systems for the Protection and Repair of Concrete Structures, Standard Test for Determination of Thermal Compatibility
EN ISO 527-1 Plastics, Determination of Tensile Properties, Part 1: General Principles Test Standard
IEC 60893-1 Standard Test for Insulating Materials, Industrial Rigid Laminated Boards Based on Thermosetting Resins for Electrical Purposes
IEC 60893-2 Standard Test for Insulating Materials, Industrial Rigid Laminated Boards Based on Thermosetting Resins for Electrical Purposes
IEC 60893-3-2 Standard Test for Insulating Materials, Industrial Rigid Laminated Boards Based on Thermosetting Resins for Electrical Purposes
DIN 7735 Standard Test for Laminates, Phenolic Resin Bonded Paper and Phenolic Resin Bonded Fabric Type Panel
EN 13438 Standard Test for Paints and Varnishes, Hot-Dip Galvanized or Charred Steel Products for Construction Purposes
EN 12670 Natural Stone, Terminology Standard Test Method
EN 12407 Natural Stone, Petrographic Inspection Standard Test Method
EN 12440 Natural Stone, Sect Criteria Standard Test Method
ISO 105-X11 Textiles, Color Fastness Tests, Part X11: Standard Test for Color Fastness to Hot Pressing
ISO 11237 Standard Test for Rubber Hoses and Hose Assemblies, Compact Wire Braid Reinforced Hydraulic Types for Oil Based or Water Based Fluids
ISO 176 Plastics, Determination of Plasticizer Loss, Standard Test for Activated Carbon Method
EN 12497 Paper and board - Test for Determination of Mercury in Aqueous Extract
EN 16521 Cosmetic Products - Test for analytical methods
ISO 8336 Fiber Cement Flat Sheets - Test for Product Properties
ISO 10666 Test for Drilling Screws with Lead Thread
EN ISO 9863-1 Geosynthetics - Test for Single Layers
ISO 18218-2 Leather, Determination of Ethoxylated Alkylphenols, Part 2: Standard Test for Indirect Method
ISO 4224 Standard Test for Ambient Air, Determination of Carbon Monoxide, Non-dispersive Infrared Spectrometric Method
GB/T 18883 Indoor Air Quality Test Standard
ISO 13964 Air Quality, Determination of Ozone in Ambient Air, Ultraviolet Photometric Method
EN 10263-4 Test for Steel Bar, Bars and Wire for Cold Heading and Cold Extrusion
ISO 48-2 Rubber, Vulcanized or Thermoplastic, Determination of Hardness, Part 2: Standard Test for Hardness from 10 IRHD to 100 IRHD
EN ISO 228-1 Pipe Threads Without Pressure Tight Connections on Threads, Part 1: Test Standard for Dimensions, Tolerances and Identification
GMW 3116 Standard Test Method for Recyclability
Standard Test for Determining the Recoil Resistance of Rubber Using a DIN 53512 Schob Pendulum
ISO 4662 Rubber, Vulcanized or Thermoplastic, Standard Test for Determination of Recoil Resistance
ISO 813 Rubber, Vulcanized or Thermoplastic, Determination of Adhesion to a Hard Substrate, Standard Test for the 90 Degree Peel Method
EN 17228 Standard Test for Plastics, Bio-Based Polymers, Plastics and Plastic Products, Terminology, Properties and Communication
EN 23312 Test for Sintered Metal Materials and Hard Metals
ISO 7801 Metallic Materials, Wire 鈥 Reverse Bend Test
EN ISO 8442-1 Food Contact Materials and Articles - Test for Cutlery
EN 1075 Test for Wooden Structures
EN 13445-2 Unignited Pressure Vessels - Testing for Materials
EN 14545 Wooden Structures - Test for Connectors
EN 14250 Wooden Structures - Test for Prefabricated Building Elements
EN 15483 Standard Test for Ambient Air Quality, Near Ground Atmospheric Measurements with FTIR Spectroscopy
EN ISO 23702-1 Leather, Organic Fluorine, Part 1: Standard Test for Determination of Non-Volatile Compounds by Extraction
ISO 7755-1 Test for Carbide Burrs
EN 1015-12 Test Methods for Masonry Mortar, Part 12: Standard Test for Determining the Adhesion Strength of Substrate Hardened Plaster and Plaster Mortars
EN ISO 1183-2 Plastics, Methods for Determining Density of Noncellular Plastics, Part 2: Density Gradient Column Method
EN ISO 15512 Plastics, Standard Test Method for Determination of Water Content
EN 16593 Standard Test Method for Packaging, Rigid Plastic Containers, PET Coating
EN 1108 Standard Test for Flexible Sheets for Waterproofing, Bitumen Sheets for Roof Waterproofing
EN 14195 Metal Framing Components, Definitions, Requirements and Test Methods for Drywall Systems
EN 14783 Fully Supported Sheet and Strip for Roofing, Cladding and Interior Cladding, Standard Test for Product Features and Requirements
ISO 2796 Cellular Plastics, Rigid, Dimensional Stability Test
ISO 14644-9 Clean Rooms and Related Controlled Environments - Testing for Surface Cleanliness
UL 207 UL Standard for Components and Accessories Containing Safety Refrigerants
EN 15824 Specifications Standard Test Method for Exterior Plasters and Interior Plasters Based on Organic Binders
EN 14411 Ceramic Tiles - Definition of Performance and Stability of Marking, Test for Classification
EN 14527 Test for Domestic Shower Trays
EN 13880-10 Hot-Applied Joint Sealants, Part 10: Test Method for Determining Adhesion and Cohesion Following Continuous Elongation and Compression
EN 200 Standard Test for Single and Combined Taps for Sanitary Fixtures, Type 1 and Type 2 Water Supply Systems
ISO 11093-6 Paper and Cardboard, Testing of Cores, Part 6: Standard Test for Determination of Flexural Strength by the Three-Point Method
ISO 5628 Standard Test for Paper and Cardboard, Determination of Flexural Rigidity, Two-Point, Three-Point, and Four-Point Methods
DIN 1913 Standard Test for Rod Electrodes for Joint Welding of Unalloyed and Low-Alloy Steels
SAE J911 Standard Test for Measurement of Surface Texture, Roughness (Ra), Number of Peaks (Pc), Metallic Coated and Uncoated Sheet Strips
EN 1935 Building Hardware, Single Axis Hinges, Requirements and Test Methods
EN ISO 11126-5 Preparation of Steel Surfaces Before Application of Paints and Related Products, Part 5: Standard Test for Nickel Slag
EN ISO 11126-8 Preparation of Steel Surfaces Before Application of Paints and Related Products, Part 8: Standard Test for Olivine Sand
DIN 8256 Plastics, Standard Test for Determination of Tensile-Impact Strength
DIN 527-1 Plastics, Determination of Tensile Properties, Part 1: General Principles Standard Test Method
DIN 527-2 Plastics, Determination of Tensile Properties, Part 2: Test Conditions for Molding and Extrusion Plastics
DIN 527-3 Plastics, Determination of Tensile Properties, Part 3: Test Conditions for Films and Sheets
SDI 116 Standard Test for Airflow Rate Through Closed Steel Door and Frame Parts
SDI 117 Manufacturing Tolerances Test Standard for Steel Doors and Frames
SDI 113 Standard Practice for Determining Steady-State Thermal Transmittance of Steel Door and Frame Assemblies
Test Procedures and Acceptance Criteria for Acoustic Performance for SDI 114 Steel Door and Frame
EN 1183 Materials and Objects in Contact with Foodstuffs - Test for Thermal Shock Resistance
ISO 62 Plastics - Test for Determination of Water Absorption
ISO 105-G02 Textile - Test for Color Fastness to Combusted Gas Fumes
ISO 18603 Packaging and Environment 鈥 Testing for Reuse
ISO 10406-1 Fiber Reinforced Polymer (FRP) Reinforcement of Concrete, Test Methods, Part 1: Standard Test for FRP Rods and Gratings
EN 13284-1 Constant Welding Emissions, Determination of Low Range Dust Mass Concentration, Part 1: Manual Gravimetric Method
ISO 15713 Standard Test for Constant Source Emissions, Sampling and Determination of Gaseous Fluoride Content
ISO 1437 Standard Test for Determination of Rubber Compound Components, Carbon Black, Screen Residue
ISO 1125 Standard Test Method for Determination of Rubber Compound Components, Carbon Black, Ash
ISO 1126 Standard Test for Determination of Rubber Compound Components, Carbon Black, Loss on Heating
ISO 1138 Standard Test for Determination of Rubber Compound Components, Carbon Black, Sulfur Content
ISO 4656-1 Determination of Absorption Number of Rubber Composition Components, Carbon Black, Dibutyl Phthalate, Part 1: Method Using an Absorbtometer
ISO 1304 Standard Test for Determination of Adsorption Number of Rubber Compound Components, Carbon Black, Iodine
EN ISO 16474-1 Paints and Varnishes, Methods of Exposure to Laboratory Light Sources, Part 1: General Guide
DIN 53515 Determination of Tear Strength of Rubber Elastomers and Plastic Film Using Notched Graves Angle Test Piece
DIN 53517 Testing of Rubber and Elastomers, Standard Test for Determination of Compression Set After Constant Deformation
EN 1797 Standard Test for Cryogenic Containers, Gas-Material Compatibility
EN ISO 17751-2 Textiles - Test for Scanning Electron Microscopy
EN ISO 9220 Metallic Coatings - Test for Measurement of Coating Thickness
EN 196-3 Cement Test Methods - Determination of Setting Times and Strength
ISO 105-F10 Textiles - Test for Properties for Adjacent Fabric
EN 12853 Food Processing Machinery - Test for Handheld Mixers and Beaters
EN 1339 Concrete Pavement Flags, Requirements and Test Methods
ABNT NBR 14696 Test for Silver Mirrors
JIS K 6264-1 Standard Test for Determination of Abrasion Resistance of Rubber, Vulcanized or Thermoplastic
EN 1894 Test for Advanced Technical Ceramics
EN 658-1 Advanced Technical Ceramics - Test for Determination of Tensile Properties
EN 658-2 Advanced Technical Ceramics - Test for Determination of Compression Properties
EN 658-3 Advanced Technical Ceramics - Test for Determination of Flexural Strength
EN 658-4 Advanced Technical Ceramics - Test for Notched Test Specimens
EN ISO 10545-4 Ceramic Tiles - Test for Determination of Modulus and Fracture Strength
ISO 15490 Thin Ceramics - Test for Monolithic Ceramics
EN 843-1 Advanced Technical Ceramics - Test for Determination of Flexural Strength
EN 843-2 Advanced Technical Ceramics - Test for Determination of Poisson Ratio
ISO 17565 Thin Ceramics - Test for Flexural Strength of Monolithic Ceramics
ISO 22215 Thin Ceramics - Test for Tensile Creep of Monolithic Ceramics
BS 4370-4 Rigid Cellular Materials - Test for Flexural Properties
BS 3748 Test for Flexural Resistance of Paper and Cardboard
BS 4415-1 Test for Determination of Tensile Properties of Paper and Board
ISO 1924-1 Paper and Cardboard - Test for Constant Load Ratio
BS 4816 Test for Determining the Puncture Resistance of Plate
ISO 9895 Paper and Cardboard - Test for Short Span
EN ISO 11093-7 Paper and Cardboard - Test for Flexural Modulus by Three-Point Method
ISO 12192 Paper and Cardboard - Test for the Ring Crush Method
EN 13864 Surfaces for Sports Fields - Test for Tensile Strength of Synthetic Yarns
EN 1436 Road Marking Materials, Road Marking Performance and Test Methods for Road Users
EN 755-3 Aluminum Alloys - Test for Round Bars, Size and Form Tolerances
ISO 22818 Textile - Test for Gas Chromatography Negative Ion Chemical Ionization Mass Spectrometry
EN ISO 5402 Leather - Test for Determination of Elastic Resistance
EN ISO 11641 Leather - Test for Color Fastness to Sweat
EN ISO 15700 Leather - Test for Color Fastness to Water Stain
EN ISO 11643 Leather - Test for Color Fastness of Small Samples to Solvents
EN ISO 5403-1 Leather - Test for Repeated Linear Compression
EN ISO 17075-2 Leather - Test for Chromatographic Method
ISO 105-B08 Textiles - Test for Blue Wool Reference Materials
ISO 12152 Testing for Lubricants, Industrial Lubricants and Related Products
EN 14525 Test for Ductile Iron, Gray Iron, Steel, PVC-U PE, Fiber Cement
EN 12842 Test for Ductile Iron Fittings for PVC-U or PE Piping Systems
EN 1186-7 Materials Plastics in Contact with Foodstuffs - Test for Aqueous Simulants
EN 1849-2 Flexible Sheets for Waterproofing - Test for Roof Waterproofing
EN 1850-2 Flexible Sheets for Waterproofing - Test for Roof Waterproofing Plastic Elastomeric Membranes
EN 681-1 Elastomeric Gaskets - Test for Vulcanized Rubber
IPC-6012E Qualification and Test for Hard Printed Cards
Test for Acceptability of IPC-A-600H Printed Boards
EU 995/2010 Wood Regulation Tests
Microplastic Free Analysis
DIN 53375 Plastic Film and Coating, Test for Determination of Coefficients of Friction
JIS K7125 Test for Static and Kinetic Friction Coefficients of Plastic Film and Coating
EN 13527 Shutters - Test for Measurement of Working Force
EN 14201 Louvers and Shutters - Test for Resistance to Repeated Operations
EN 13330 Shutters - Test for Hard Object Impact and Access Prevention
EN 13659 Test for Shutters and Exterior Venetian Blinds
EN 12045 Electrically Operated Shutters - Test for Measurement of Transmitted Force
IEC EN 60335-2-97 Household and Similar Electrical Appliances - Test for Roller Shutters
ISO 22197-1 Fine Ceramics - Test for Nitric Oxide Removal
ISO 22197-2 Thin Ceramics - Test for Acetaldehyde Removal
ISO 22197-3 Thin Ceramics - Test for Toluene Removal
ISO 22197-4 Fine Ceramics - Test for Formaldehyde Removal
凡1奫u懺r幥?咞Wtifi-testleri/">MID 2014/32/EU Measuring Instruments Directive Tests
Slip Factor Test
ISO IWA 32 Test for Screening of Genetically Modified Organisms in Cotton and Textile Products
CPSC-CH-E1003-09-1 Test to Determine Lead in Paint and Other Similar Surface Coatings
EN ISO 11997-1 Paints and Varnishes - Test for Wet Salt Mist
EN 1013 Test for Light Transmitting Single Wall Profile Plastic Sheets for Interior and Exterior Roofs, Walls and Ceilings
EN ISO 4014 Test for Hex Head Bolts
TS 3596 Textile - Cotton Canvas Cloth - Features
CSA B45.5 Test for IAPMO Z124 Plastic Plumbing Fixtures
IPC-TM 650 2.4.9 Peel Strength Test for Flexible Dielectric Materials
ISO 18080-1 Standard for Electrostatic Testing of Textile Fabrics
ISO 10640 Plastics - Test for Polymer Photo-Aging Evaluation Methodology by FTIR and UV/Visible Spectroscopy
EN ISO 877-1 Plastics - Test for Solar Radiation Exposure Methods
EN ISO 877-2 Plastics - Test for Direct Weather Exposure and Exposure Behind Window Glass
ISO 17088 Plastics, Organic Recycling 鈥 Testing for Compostable Plastics
EN ISO 16474-4 Paints and Varnishes - Test for Open Flame Carbon Arc Lamps
AAMA 501.2 Test for Details of Joints, Gaskets and Sealant in Glass
EN 13813 Test for Screed Material and Floor Screed
ISO 11359-1 Plastics - Thermomechanical Analysis - Test for General Principles
ISO 105-N01 Textiles - Test for Color Fastness to Bleaching
ISO 105-C01 Textiles - Test for Color Fastness to Washing
EN ISO 1167 Test for Thermoplastic Pipes, Fittings and Assemblies for the Transport of Fluids
BS 2782 Methods for Testing Plastics
ISO 11357-1 Plastics - Differential Scanning Calorimetry Test
DIN 7344 Spiral Pins - Heavy Duty Tests
ISO 787-2 Pigments and Fillers - Test for Determination of Volatile Matter at 105 Degrees
ISO 787-11 Pigments and Fillers - Test for Determination of Compacted Volume and Apparent Density After Compaction
EN 323 Wood Based Panels - Test for Density Determination
EN 314-1 Plywood - Bonding Quality - Test Methods
EN 314-2 Plywood - Bonding Quality - Test for Requirements
EN ISO 10545-2 Ceramic Tiles - Test for Determining Dimensions and Surface Quality
EN ISO 10545-7 Ceramic Tiles - Test for Determination of Surface Wear Resistance for Glazed Tiles
EN ISO 10545-16 Ceramic Tiles - Test for Determining Minor Color Differences
EN ISO 10545-12 Ceramic Tiles - Test for Determination of Frost Resistance
EN ISO 10545-10 Ceramic Tiles - Test for Determination of Moisture Expansion
EPDM Rubber Plastic Tests
Daimler DBL 5972 Single Layer Acoustic Insulation Materials
EN 196-6 Cement Test Methods - Part 6: Test for Determination of Fineness
ISO 12944-1 Paints and Varnishes - General Introduction Standard Test
ISO 9073-11 Textiles, Nonwovens - Test for Flow
ISO 9073-14 Textiles - Test for Coverstock Rebound
ISO 7854 Test for Rubber or Plastic Coated Fabrics
EN ISO 24343-1 Flexible and Laminate Flooring - Test for Residual Indentation
ISO 8895 Formed Insulating Refractory Products - Test for Cold Crush Strength
EN ISO 21305-1 Plastics - Polycarbonate (PC) Molding and Extrusion Materials - Part 1: Identification System and Basis of Specifications
EN 846-2 Test Methods for Auxiliary Components for Masonry - Part 2: Determination of Adhesion Strength of Prefabricated Bed Joint Reinforcement in Mortar Joints
EN 846-3 Auxiliary Components Test Methods for Masonry - Determination of Shear Load Capacity of Welds in Prefabricated Bed Joint Reinforcement
EN 846-7 Auxiliary Components for Masonry - Part 7: Test for Determination of Shear Load Capacity and Load Displacement Properties of Shear Ties and Sliding Ties
EN 846-8 Auxiliary Components for Masonry - Part 8: Test for Determination of Load Capacity and Load Deflection Characteristics of Beam Suspenders
EN 846-9 Test Methods for Auxiliary Components for Masonry - Part 9: Test for Determination of Flexural Strength and Shear Resistance of Lintels
EN 846-10 Test Methods for Auxiliary Components for Wall - Determination of Load Capacity and Load Deflection Characteristics of Brackets
EN 846-11 Test Methods for Auxiliary Components for Masonry - Part 11: Test for Determining the Dimensions and Slope of Liners
EN 12524 Building Materials and Products - Hygrothermal Properties - Design Values 鈥嬧€婽est with Tables
ISO 48-3 Rubber - Vulcanized or Thermoplastic - Determination of Hardness - Part 3: Constant Load Hardness Using the Very Low Rubber Hardness (VLRH) Scale
ISO 48-4 Rubber - Vulcanized or Thermoplastic - Determination of Hardness - Part 4: Standard Test for Indentation Hardness by Durometer Method
ISO 48-5 Rubber - Vulcanized or Thermoplastic - Determination of Hardness - Part 5: Standard Test for Indentation Hardness by the IRHD Pocket Gauge Method
ISO 48-6 Rubber - Vulcanized or Thermoplastic - Determination of Hardness - Part 6: Apparent Hardness of Rubber Lined Rollers by IRHD Method
ISO 48-7 Rubber - Vulcanized or Thermoplastic - Determination of Hardness - Part 7: Apparent Hardness of Rubber Lined Rollers by Shore Type Durometer Method
ISO 48-8 Rubber - Vulcanized or Thermoplastic - Determination of Hardness - Part 8: Apparent Hardness of Rubber Lined Rollers by Pusey and Jones Method
ISO 48-9 Rubber - Vulcanized or Thermoplastic - Determination of Hardness - Part 9: Calibration and Verification Test of Hardness Testers
EN 13970 Flexible Sheets for Waterproofing - Bituminous Water Vapor Control Layers - Standard Test for Definitions and Properties
EN 1926 Natural Stone Test Methods - Standard Test for Determination of Uniaxial Compressive Strength
ISO 15714 Method of Evaluating UV Dose to Airborne Microorganisms Passing Through In-Channel Ultraviolet Germicidal Irradiation Devices
EN 1337-1 Structural Supports - Part 1: Standard Test for General Design Rules
EN 1337-2 Structural Bearings - Part 2: Standard Test for Sliding Elements
EN 59 Glass Reinforced Plastics - Test for Determination of Indent Hardness by Barcol Hardness Tester
EN 14080 Timber Structures - Glued Laminated Wood and Glued Solid Wood - Standard Test for Requirements
ISO 17831-1 Solid Biofuels - Standard Test Method for Determining the Mechanical Strength of Pellets and Briquettes
ISO 17831-2 Solid Biofuels - Determination of Mechanical Strength of Pellets and Briquettes - Part 2: Standard Test for Briquettes
EN 12114 Thermal Performance of Buildings - Air Permeability of Building Components and Structural Elements - Laboratory Test Method
DIN 53497 Testing of Plastics - Hot Storage Test Without External Mechanical Stress on Molds Made of Thermoplastic Molding Materials
EN ISO 1183-3 Plastics - Methods for Determining Density of Non-Cellular Plastics - Part 3: Gas Pycnometer Method
EN 13892-1 Test Methods for Screed Materials - Part 1: Sampling and Curing Testing for Testing
EN 13892-3 Test Methods for Screed Materials - Part 3: Determination of Wear Resistance - B枚hme
EN 1504-1 Test Standard for Products and Systems for the Protection and Repair of Concrete Structures
EN 1504-4 Products and Systems for the Protection and Repair of Concrete Structures - Part 4: Structural Adhesion Test Standard
EN 1504-5 Products and Systems for the Protection and Repair of Concrete Structures - Part 5: Concrete Injection Test Standard
DIN 18560-2 Floor Screeds in Building Construction - Part 2: Floor Screeds and Heated Floor Screeds on Insulation Layers
BS 6319 Testing of Resin and Polymer-Cement Compositions for Use in Construction
EN ISO 14188 Grouting and Sealants - Part 1: Standard Test Method for Properties of Hot-Applied Sealants
BS 6319-7 Testing Resin Compositions for Use in Construction Part 7: Method of Measuring Tensile Strength
BS 6319-6 Testing of Resin Composition for Use in Construction - Part 6: Method for Determining the Modulus of Elasticity in Compression
EN 934 Concrete - Standard Test Method for Mortar and Screed Admixtures
EN 934-3 Concrete - Additives for Mortar and Screed - Part 3: Additives for Masonry Mortar - Definitions - Requirements - Compliance and Marking and Labeling
TS 16637-3 Construction Materials - Evaluation of the Release of Hazardous Substances - Part 3: Horizontal Upflow Percolation Test
EN 661 Flexible Floor Coverings - Standard Test Method for Determining the Permeability of Water
EN 678 Standard Test Method for Determining the Dry Density of Autoclaved Aerated Concrete
EN 679 Standard Test Method for Determining the Compressive Strength of Autoclaved Aerated Concrete
EN 680 Standard Test Method for Determining Drying Shrinkage of Autoclaved Aerated Concrete
EN 772 Test Methods for Masonry Units
EN 15304 Standard Test Method for Determination of Freeze-Thaw Resistance of Autoclaved Aerated Concrete
EN 772-11 Test Methods for Masonry Units - Part 11: Aggregate Concrete - Autoclaved Aerated Concrete - Determination of Water Absorption Rate of Manufactured Stone and Natural Stone Masonry Units Due to Capillary Action
EN 12602 Standard Test Method for Precast Reinforced Components of Autoclaved Aerated Concrete
EN ISO 140-1 Acoustics - Measurement of Sound Insulation in Buildings and Structural Elements - Part 1: Requirements for Laboratory Test Facilities with Suppressed Pass Through
EN ISO 140-3 Acoustics - Measurement of Sound Insulation in Buildings and Structural Elements - Part 3: Laboratory Measurements of Airborne Sound Insulation of Building Elements
EN 13707 Flexible Sheets for Waterproofing - Reinforced Bituminous Sheets for Roof Waterproofing - Definitions and Specifications
EN ISO 29862 Self-Adhesive Tapes - Standard Test for Determination of Peel-Adhesive Properties
EN 1382 Wooden Structures - Test Methods - Tensile Capacity Test of Wooden Fasteners
EN 197-2 Cement - Standard Test for Performance Stability
TS 7847 Paints and Plasters - Test for Masonry and Concrete Exterior Coating Materials
TS 1261 Clay Products - Test for Hollow Clay Block Not Participated in Static Study
EN 12390-10 Hardened Concrete - Carbonation Resistance Test of Concrete for Carbon Dioxide in the Atmosphere
EN 771-3 Standard Test Method for Aggregate Concrete Masonry Units
EN 772-13 Masonry Units - Test for Determination of Net and Gross Dry Density of Masonry Units
EN 772-19 Masonry Units - Standard Test for Determining Moisture Expansion of Clay Masonry Units
EN 13369 Common Rules Test Standard for Precast Concrete Products
EN 15037-3 Precast Concrete Products - Standard Test for Clay Blocks
EN 15037-1 Precast Concrete Products - Standard Test Method for Beams
EN 15037-2 Precast Concrete Products - Standard Test for Concrete Blocks
EN 772-14 Test for Determination of Moisture Movement of Aggregated Concrete and Manufactured Stone Masonry Units
EN 771-2 Standard Test for Calcium Silicate Wall Units
BS 1377 Standard Testing of Soils for Civil Engineering Purposes
EN ISO 17892-3 Geotechnical Investigation and Tests - Standard Test for Particle Density
BS 1881-204 Concrete Testing - Standard Test for Electromagnetic Shutters
BS 1881-113 Testing Concrete - Making and Curing Test of Non-Thin Test Cubes
BS 1881-124 Test of Concrete - Standard Test for Analysis of Hardened Concrete
BS 476-15 Fire Tests on Building Materials for Measuring Heat Dissipation Rate
BS 1881-114 Testing Concrete - Test to Determine Density of Hardened Concrete Standard
BS 1881-129 Concrete Test - Test for Determining Density of Partially Compacted Semi-Dry Fresh Concrete
EN ISO 17892-4 Geotechnical Research and Test - Test for Determination of Grain Size Distribution
EN 13791-1 Test for Compressive Strength of Structures and Precast Concrete Components
EN 12390-7 Tests of Hardened Concrete - Test for Density of Hardened Concrete
EN 12390-12 Hardened Concrete Tests - Accelerated Carbonation Test of Concrete
EN 12390-18 Hardened Concrete Tests - Test for Determination of Chloride Transition Coefficient
EN 932-5 Calibration Standard Test for General Properties of Aggregates
Standard Test for Specific Gravity of Soil Solids with ASTM D854 Water Pycnometer
AASHTO T92 Standard Test Method for Determining the Shrinkage Factors of Soils
ASTM D422 Standard Test for Particle Size Analysis of Soils
EN 933-2 Aggregates - Test for Determination of Particle Size Distribution
TS 1900-2 Soil Laboratory Tests in Civil Engineering - Test for Mechanical Properties
Testing of Central Greek Ultramafic Rocks Using ISRM 2007 Physical-Dynamic and Mechanical Properties
EN ISO 17892-12 Geotechnical Investigation and Test - Standard Test for Determination of Liquid and Plastic Limits
TS 1900-1 Soil Laboratory Tests in Civil Engineering - Test for Physical Properties
EN ISO 14688-1 Geotechnical Investigation and Tests - Standard Test for Soil Identification and Classification
EN 13755 Natural Stone Test Methods - Test for Determination of Water Absorption at Atmospheric Pressure
BS 1881-211 Testing Concrete - Test for Petrographic Inspection of Hardened Concrete
BS 1881-5 Concrete Testing - Standard Test Other than Strength of Hardened Concrete
BS 1881-122 Concrete Testing - Standard Test for Determining Water Absorption
EN ISO 17892-5 Geotechnical Investigation and Tests - Oedometer Standard Test with Incremental Loading
EN 12390-8 Hardened Concrete Tests - Test for Water Penetration Depth Under Pressure
EN 12390-11 Tests of Hardened Concrete - Test for Determination of Chloride Resistance of Concrete
EN 12390-9 Hardened Concrete Tests - Scaling Test of De-icing Salts
ISO 13774 Rubber and Plastic Hoses for Fuels for Internal Combustion Engines-Test for Flammability
EN 12390-1 Hardened Concrete Tests - Shape-Size Test for Samples and Molds
TS 4312 Experimental Sieves and Sieve Analysis Tests
UNI 10014 Field of Evidence-Test for Determining the Limit of Consistency of a Soil
UNE 103-108 Shrinkage Limit Standard Test
ISO 17892-6 Geotechnical Investigation and Tests - Drop Cone Standard Test
EN 1990 Eurocode - Standard Test for Basis of Structural Design
EN 1992-1-1 Eurocode 2 - Design of Concrete Structures - General Rules Test Standard for Buildings
EN 12504-4 Testing Concrete in Buildings - Test for Determination of Ultrasonic Pulse Velocity
NF P18-447 Concrete Tests - Determination of Ultrasound Transition Rate
EN 12615 Curved Shear Strength Test for the Protection and Repair of Concrete Structures
EN 12614 Glass Transition Temperature Test of Polymers for the Protection and Repair of Concrete Structures
EN ISO 10320 Field Identification Test for Geosynthetics
EN 480-1 Concrete - Additives for Mortar and Screed - Test for Reference Concrete and Reference Mortar for Testing
EN 480-2 Concrete - Additives for Mortar and Screed - Test for Determination of Setting Time
EN 480-3 Concrete - Additives for Mortar and Screed - Test for Determination of Contraction and Expansion
EN 480-4 Concrete - Additives for Mortar and Screed - Test for Determination of Concrete Seepage
EN 480-5 Concrete - Additives for Mortar and Screed - Test for Determination of Capillary Absorption
EN 480-7 Concrete - Additives for Mortar and Screed - Test for Determination of Density of Liquid Admixtures
EN 480-9 Concrete - Additives for Mortar and Screed - Test for Determination of pH Value
EN 480-11 Concrete - Additives for Mortar and Screed - Test for Determination of Air Void Properties in Hardened Concrete
EN 480-12 Concrete - Additives for Mortar and Screed - Test for Determination of Alkaline Content of Additives
EN 480-13 Concrete - Additives for Mortar and Screed - Reference Masonry Mortar for Testing Mortar Admixtures
Coefficient of Friction (COF) Test
EN 13238 Reaction to Fire Tests for Building Products
EN ISO 11357-7 Plastics - Differential Scanning Calorimetry (DSC) - Determination of Crystallization Kinetics
EN ISO 11357-8 Plastics - Differential Scanning Calorimetry (DSC) - Determination of Thermal Conductivity
NF G07-170 Textile Fabrics - Test for Determining Mass Per Unit Area Using Small Samples
ISO 16533 Textiles - Test for Measurement of Exothermic and Endothermic Properties of Textiles Under Moisture Change
EN 12939 Test Method for Determination of Thermal Resistance of Building Materials
EN 13820 Thermal Insulation Materials for Building Applications - Determination of Organic Content
EN 13172 Thermal Insulation Products - Conformity Assessment
ISO 10406-2 Fiber Reinforced Polymer (FRP) - Test Methods - FRP Sheets
ISO 10406-3 Fiber Reinforced Polymer (FRP) Reinforcement of Concrete - Test Methods - CFRP Strips
ISO 15113 Rubber - Test Method for Determining Friction Properties
ISO 3302-1 Rubber - Tolerances for Products
ISO 3302-2 Rubber - Tolerances for Products - Geometric Tolerances
TS 1398-1 Plastics - Determination of Tensile Properties
ISO 13802 Plastics - Verification of Pendulum Impact Testing Machines - Charpy - Izod and Tensile Impact Test
ISO 11093-9 Paper and Cardboard - Testing of Cores - Determination of Flat Crush Resistance
ISO 11093-1 Paper and Cardboard - Testing Cores
ISO 11093-3 Paper and Cardboard - Testing of Cores - Determination of Moisture Content Using Oven Drying Method
ISO 11093-5 Paper and Cardboard - Testing of Cores - Determination of Concentric Rotation Properties
ISO 11093-8 Paper and Cardboard - Determination of Natural Frequency and Flexural Modulus by Experimental Modal Analysis
ISO 881 Asbestos Cement Pipes for Sewage and Drainage - Connections and Fittings
EN ISO 2286-1 Rubber or Plastic Coated Fabrics - Standard Test for Determination of Roll Properties
EN ISO 2286-3 Rubber or Plastic Coated Fabrics - Determination of Roll Properties - Method for Determination of Thickness
TS 1913 Building Materials - Determination of Heat Value
EN 12085 Thermal Insulation Products for Building Applications - Determination of Linear Dimensions of Test Samples
EN 13497 Thermal Insulation Products for Building Applications - Impact Resistance Test of External Thermal Insulation Composite Systems
EN 13498 Thermal Insulation Products for Building Applications - Determination of Penetration Resistance of Exterior Thermal Insulation Composite Systems
TS 1912 Flammability Test Method for Building Materials
EN 13500 Thermal Insulation Products for Buildings - Mineral Wool Based External Thermal Insulation Composite Systems (ETICS)
NF-P75-424 Thermal Insulation Products for Building Applications - Determination of Penetration Resistance of Exterior Thermal Insulation Composite Systems
NF P50-761 Standard Test for Thermal Behavior of Building Materials and Building Products
EN 1946-1 Thermal Performance of Building Products - Special Criteria for the Evaluation of Laboratories Measuring Heat Transfer Properties
NF P75-224 Thermal Performance of Building Materials - Determination of Thermal Resistance Using Shielded Hot Plate and Heat Flow Meter Methods
EN 1946-3 Thermal Performance of Building Products - Special Criteria for the Evaluation of Laboratories Measuring Heat Transfer Properties
EN 1946-2 Thermal Performance of Building Products - Special Criteria for the Evaluation of Laboratories Measuring Heat Transfer Properties
DIN 16950 Flooring Materials - Semi-Flexible Tiles - Requirements and Test Methods
DIN 68750 Wood Fiber Building Boards - Porous and Hard Wood Fiber Building Boards - Quality Conditions
GOST 7076 Building Materials and Products - Method for Determining Steady-State Thermal Conductivity and Thermal Resistance
DIN 53516 Testing of Rubber and Elastomers - Determination of Wear Resistance
CAN/ULC S101 Standard Methods for Fire Resistance Tests of Building Construction Materials
CAN/ULC S134 Standard Fire Test Method of Exterior Wall Mounts
CAN/ULC S138 Standard Test for Fire Growth of Insulated Building Panels in Full-Scale Room Configuration
EN 14234 Materialsb癚蹕鬊XE澩tS懵RK慆c耗: and Objects in Contact with Foodstuffs - Test for Polymeric Coatings on Paper and Cardboard
EN 13892-5 Screed Materials - Determination of Wear Resistance of Screed Material Against Rolling Wheel for Wear Layer
EN 13892-6 Test Methods for Screed Materials - Standard Test for Determination of Surface Hardness
EN 13892-7 Screed Materials - Determination of Wear Resistance of Floor Covered Screed Material Against Rolling Wheel
EN 13892-8 Test Methods for Screed Materials - Standard Test for Determination of Bond Strength
EN 13892-9 Test Methods for Screed Materials - Dimensional Stability
EN 12608-2 Non-Plasticised Polyvinylchloride (PVC-U) Profiles for the Manufacturing of Windows and Doors - Laminated Profiles
EN 477 Plastics - Poly(vinyl chloride) (PVC) Based Profiles - Determination of Resistance of Profiles against Falling Mass Impact
EN 478 Plastics - Standard Test for Poly(vinyl chloride) (PVC) Based Profiles
EN 479 Plastics - Poly(vinyl chloride) (PVC) Based Profiles - Determination of Heat Recycling
EN 514 Plastics - Poly(vinyl chloride) (PVC) Based Profiles - Determination of Strength of Welded Corners and T Joints
EN ISO 293 Plastics - Compression Molding of Test Specimens from Thermoplastic Materials
EN ISO 472 Plastics - Vocabulary
EN 1504-6 Products and Systems for the Protection and Repair of Concrete Structures - Anchoring of Reinforcing Steel Bar
DIN 53457 Testing of Plastics - Determination of Elasticity Modulus with Tensile - Compression and Bending Tests
DIN 53547 Testing of Rubber and Elastomers - Determination of Creep of Elastomers Under Compressive Tension
DIN 53459 Testing of Plastics - Evaluation of Behavior During and After Contact with a Glow Rod
TS 10967 Concrete Tests - Curing Agent Applied to the Concrete Surface - Determination of Water Retention Properties
TS 10966 Liquid Curing Materials - Test Method for Curing Materials Applied to the Concrete Surface
EN 12153 Curtain Wall - Standard Test for Air Permeability
DIN 4108 Standard Test for Thermal Insulation and Energy Economy in Buildings
EN ISO 10140-5 Acoustics - Laboratory Measurement of Sound Insulation of Building Elements
EN ISO 140-2 Acoustics - Measurement of Sound Insulation in Buildings and Building Elements
EN ISO 140-5 Acoustics - Field Measurements of Airborne Sound Insulation of Facade Elements and Facades
EN ISO 140-6 Acoustics - Laboratory Measurements of Impact Sound Insulation of Floors
EN ISO 140-7 Acoustics - Field Measurements of Impact Sound Insulation of Floors
EN ISO 11600 Building Construction - Testing for Classification of Sealing Materials
EN 26927 Building Construction - Joint Products - Test Method for Sealing Materials
EN 28339 Building Construction - Joint Sealing Materials - Determination of Tensile Properties
EN 28340 Building Construction - Sealing Materials - Test for Determination of Tensile Properties in Sustained Extension
TS 7845 Building Construction - Joint Sealing Materials - Determination of Tensile Properties at Constant Elongation
TS 7719 Horizontal Connections Between Exterior Wall Consisting of Prefabricated Concrete Components and Concrete Floor
EN 27390 Building Construction - Joining Products - Determination of Resistance to Flow
TS 8403 Building Construction - Joint Materials - Determination of Flow Resistance of Sealing Materials
EN ISO 140-9 Acoustic - Laboratory Measurement of Airborne Sound Insulation from Room to Room of Suspended Ceiling with Plenum
EN ISO 140-10 Acoustics - Laboratory Measurement of Airborne Sound Insulation of Small Building Elements
EN ISO 140-11 Acoustics - Laboratory Measurements of Impact Sound Transmitted by Floor Coverings on Floors
EN ISO 140-12 Acoustics - Laboratory Measurement of Room-to-Room Air and Impact Sound Insulation of an Access Floor
EN 13950 Test Methods for Gypsum Board Thermal/Acoustic Insulation Composite Panels
EN 13915 Test for Prefabricated Gypsum Board Panels with Cellular Cardboard Core
EN 772-20 Masonry Units - Test for Determining the Flatness of the Faces of Masonry Units
EN 772-1 Masonry Units - Test Method for Determination of Compressive Strength
EN 772-2 Test for Determining the Percentage of Void Areas in Aggregated Concrete Masonry Units
EN 772-3 Determination of Net Volume and Void Percentage of Clay Masonry Units by Hydrostatic Weighing
EN 772-4 Determination of Actual Bulk Density and Open Porosity for Natural Stone Masonry Units
EN 772-5 Determination of Active Soluble Salt Content of Clay Masonry Units
EN 772-6 Determination of Flexural Tensile Strength of Aggregated Concrete Masonry Units
EN 772-7 Determination of Water Absorption Rate of Clay Masonry Moisture Resistant Layer Units
EN 772-8 Determination of Water Absorption Rate of Aggregated Concrete Masonry Units by Wetting
EN 772-9 Determination of Net Volume of Clay and Calcium Silicate Masonry Units with Sand Filling
EN 772-10 Determination of Moisture Content of Calcium Silicate and Autoclaved Aerated Concrete Units
EN 196-1 Cement - Test Method for Determination of Strength
EN 196-2 Cement Testing Method - Chemical Analysis of Cement
EN 196-4 Cement Test Methods - Quantitative Determination of Components
EN 196-5 Cement - Pozzolanicity Test for Pozzolanic Cement
DIN 51290-1 Testing of Polymer Concrete for Use in Mechanical Engineering
DIN 51290-2 Testing of Polymer Concrete - Testing of Fillers and Ready-to-Use Mixtures
SATRA TM 174 Wear Resistance - Rotary Drum Method
EN 442-1 Radiators and Convectors - Part 1: Technical Specifications and Requirements
DIN 7863-1 Elastomer Glasses and Panel Gaskets for Windows and Coverings
EN 12365-1 Building Hardware - Gaskets and Insulation Materials for Doors, Windows, Shutters and Curtain Walls

OTHER TESTS

ASTM Tests
Ballistic MIL-SPEC Tests
Chemical Tests
Contamination Analysis
Type Approval Tests
Dynamic Tests
Electric Electronic Tests
Electromagnetic and Electrical Tests
Environmental Tests
Error Analysis Tests
Fiber Optic Test
Liquids and Fuel Tests
Global Market Access
Hardware and Software Tests
Medical Device Tests
Hydraulic Test
Lightning Tests
Material Testing
Mechanical Tests
NDT Tests
Packaging Tests
Pneumatic Tests
Precision Cleaning Tests
Product Safety Tests
Shock Tests
Wireless Device Testing
Product Suf4柊-喽咿猱N穁崥c鞌? 5鴫坒iciency Tests
Metal Test Laboratory
Respirator Compatibility Tests
Protective Clothing Tests
Protective Clothing Tests
Eye and Face Protection Equipment Tests
Fall Protection Equipment Tests
Foot Protection Equipment Tests
Hand Protection Equipment Tests
Head Protection Equipment Tests
Hearing Protection Equipment Tests
Motorcyclist Protection Equipment Tests
Respiratory Protection Equipment Tests
Vegan / Vegetarian Tests

Material Testing

ISO 13544 Anesthetic and Respiratory Equipment - Nebulization Systems and Components

Material Testing

OTHER TESTS

Get Offer Now

Contact Us

Our Expert Team is Ready to Help

Our Expert Team is Ready to Help

Our accreditations

Quality policy

Mission and Vision

Privacy Policy

Why EUROLAB?

Contact

Material Testing

ISO 13544 Anesthetic and Respiratory Equipment - Nebulization Systems and Components

Material Testing

OTHER TESTS

Get Offer Now

Contact Us