Vehicle Fitment
| Make | Model | Year |
|---|---|---|
| Ford | Mustang | 1967-1970 |
Product Details
Street Series™ Stainless Steel Crossmember-Back Exhaust System with Split Rear Exit (15819) by MagnaFlow®. Exhaust System Type: Crossmember-Back. Exhaust Tubing Material: Stainless Steel. Main Tubing Diameter: 3". Exhaust System Sound: Moderate. MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.
Notes
- Remember to check your local and state laws regarding vehicle noise restrictions.
Specifications
| Exhaust System Type: Crossmember-Back |
| Exhaust Tubing Material: Stainless Steel |
| Exit Location: Dual Split Rear |
| Exit Configuration: Dual |
| Main Tubing Diameter: 3" |
| Exhaust Exterior Sound: Moderate |
| Exhaust Interior Sound: Mild |
| Exhaust Inlet Connection Type: Weld-On |
| Muffler Quantity: 2 |
| Muffler Body Height: 4" |
| Muffler Body Width: 9" |
| Muffler Body Length: 14" |
| Muffler Body Diameter: 4" H x 9" W |
| Muffler Body Material: Stainless Steel |
| Muffler Body Finish: Polished |
| Muffler Body Shape: Oval |
| Hardware Included: Band Clamp x8, Bolt x6, Bracket x4, Grommet x2, Isolator x2, Nut x6, Screw x4, Washer x6 |
| Installation Complexity: Bolt-on. Do it Yourself |
| Tip Quantity: None |
| 409 Stainless Steel Construction |
Includes
- (1) Inlet Pipe
- (6) 3" Clamp
- (1) Tru-X Assembly
- (1) Muffler Assembly D/S
- (1) Muffler Assembly P/S
- (2) Hanger Bracket
- (1) D/S Tailpipe
- (1) P/S Tailpipe
Features
- Moderate Sound
- Delivers More Horsepower
- Delivers A Smooth, Deep Tone
- 100% Stainless Steel For Long Life
- Lifetime Warranty – Lasting For The Time You Own The Vehicle
The stainless steel pipes in a MagnaFlow System are mandrel bent, keeping their shape through the bends to avoid obstructions to the gas flow. The gases are led into the free-flow mufflers with smooth necks and a straight-through, perforated stainless steel tuning pipe. The pipe is wrapped in a stainless mesh wrap and surrounded by tightly packed acoustical fiber in a lap-joint welded stainless steel body. The muffler is finely tuned to dampen irritating pitch notes and to deliver that smooth, deep and powerful tone that is so characteristic of MagnaFlow exhausts. The quality materials and the tight packing of the acoustical material ensure long life and no sound degradation over time.
The careful free-flow design, the first class workmanship and the attention to detail in both design and fabrication combine to achieve the power increase, the finely tuned sound and the long life of MagnaFlow products.
Get your MagnaFlow performance system now. It is an excellent base for further refinement of your vehicle. And while you are thinking about the next step you can listen to the wonderful music played by your MagnaFlow exhaust.
MagnaFlow® has been in business for more than 30 years, with its slogan "Quality – Power – Sound" leading the company on its steady path to success. MagnaFlow is the market leader in exhaust systems. No other brand has managed to fulfill the demands auto enthusiasts have on their exhaust systems, while still complying with emission standards, as MagnaFlow has. The product line is steadily expanding, introducing new, cutting edge technologies and designs. MagnaFlow is the leader in exhaust system design and the company is determined to stay in the lead.
California Residents
WARNING Cancer and Reproductive Harm. www.p65warnings.ca.gov
Installation
MagnaFlow® - Street Series™ Stainless Steel Crossmember-Back Exhaust System Installation Instructions
Warranty
The manufacturer warrants that all Magnaflow Performance Products are free from defects. Most of exhaust products are warranted against blowouts and defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. The warranty is void if the exhaust products are not installed properly on the vehicle for which it is designed.
This warranty does not apply to any exhaust product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, or subjected to misuse or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.
The warranty certificate, along with proof of purchase, MUST be presented to the service outlet from which you originally purchased the exhaust product, or any participating dealer, when making a claim for replacement. The original exhaust product must also be returned and exchanged for a new exhaust product of the same part number.
No other warranty, expressed or implied (including merchantability), applies to the exhaust product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the exhaust product, or inconvenience or interruption in any operation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
- Ceramic Coating: 1 Year Warranty
- Finish: Black - 1 Year Warranty, Limited Lifetime Warranty against Manufacturing Defects
- Finish: Titanium - 1 Year Warranty, Limited Lifetime Warranty against Manufacturing Defects
- Carbon Fiber - Limited Lifetime Warranty, against Manufacturing Defects on Stainless Steel, No Warranty on Carbon Fiber
- Construction: Aluminized - 1 Year Warranty
- Construction: Stainless - Lifetime Warranty
- Mufflers: Lifetime Warranty
- Cat-Backs: Lifetime Warranty
Federal EPA Converters Warranty:
- Internal (Converter substrate): 2 Years, 25,000 Miles
- External (Converter housing assembly): 5 Years, 50,000 Miles
California CARB Approved Converters Warranty:
- Internal and External: 5 Years, 50,000 Miles
Federal EPA Converters Sold in New York:
- Internal (converter substrate): 2 Years, 25,000 Miles
- External (converter housing assembly): 5 Years, 50,000 Miles
California CARB Approved Converters Sold in New York:
- Internal & External: 5 Years, 50,000 Miles
Magnuson-Moss Warranty Act:
Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More
Related Links
Reviews
(0)Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Questions and Answers
(0)If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!