Siemens NX 2212 Build 3001 (NX 2212 Series)
Siemens NX 2212 Build 3001 (NX 2212 Series) | 15.3 Gb
Languages Supported: English, 中文, Čeština, Español, Français, Deutsch,
Italiano, 日本語, 한국어, Polski, Português, Русский
Languages Supported: English, 中文, Čeština, Español, Français, Deutsch,
Italiano, 日本語, 한국어, Polski, Português, Русский
The Siemens Digital Industries Software development team is pleased to announce the availability of NX 2212 Build 3001 (NX 2212 Series). With each new release of NX, we are continuing to innovate, creating the most productive modeling environment for all.
What's new in NX 2212.3001
Managing line types
Use a library to manage a collection of line types with unique display characteristics. You can create lines of different line types to more easily differentiate between disciplines. You can manage line types using Teamcenter or a library configuration file. Use the Line Types command to create a new line type or edit an existing line type. You can create a unique line type by modifying:
- Color
- Width
- Line style
Use the Priority column to define how the line type interacts with other lines in a diagram, such as which line uses a jumper at an intersection.
Siemens NX 2212 Build 3001 (NX 2212 Series)
Fixed_Problem_Reports_2212.3001
2212.3,8412258,ToolP ath Gouge Check find gouges where are no gouges exists,CAM,THREAD_MILL,OTHER
2212.3,8613652,IFC export of an assembly from NX running in managed mode fails,TRANSLATOR,IFC,EXPORT
2212.3,8613965,"Incorrect mesh generated due to ""Stitch Edge"".",CAE,DES_SIMULATION,MESH_CONTROL
2212.3,8616128,Probe integral - Not able to get a value for existing probe,CAE,ADV_SIMULATION,POST_RESULT
2212.3,8616915,PR10248194 is not fixed.,ROUTING_MECH,TOOLS,BEND_REPORT
2212.3,9489164,"The result of assembly clearance differs if ""save interference geometry"" ON/OFF.",ASSEMBLIES,ASSEMBLY_MODEL,CLEAR_ANALYSIS
2212.3,9748045,Thread Milling Reports Wrong Gouge Motion,CAM,THREAD_MILL,OTHER
2212.3,9981684,Open part error-An operation was attempted on an invalid or unsuitable OM object,ASSEMBLIES,ASSEMBLY_MODEL,COMPONENT_ARRAY
2212.3,10021658,Animated Exploded Transform CSYS Does Not Place properly after initial creation,SYSENG,UI_CONSTRUCTORS,VECTOR
2212.3,10024869,Make Current Feature breaks Pocket Linked Body instances on Positioning Feature,ASSEMBLIES,ASSEMBLY_MODEL,COMP_PATTERN
2212.3,10036718,NXMGR: Assembly Open performance issues with many component patterns,ASSEMBLIES,POSITIONING,CONSTRAINTS
2212.3,10107362,Components which are suppressed not released even the arrangement is switched,ASSEMBLIES,ASSEMBLY_MODEL,COMP_SUPPRESS
2212.3,10229205,Change Item Revision Name in TC is not kept with save in NX.,NXMANAGER,ATTRIBUTES,MAPPING
2212.3,10251165,Ped Pro GTR TVP not trimmed out right,KDA,GENERAL_PACKAGE,PEDPRO
2212.3,10281215,Close Discovery Center default is not honored when a part opened from Teamcenter,SYSENG,UI_TOOLS,WELCOME_PAGE
2212.3,10305678,FeatureUpdate_during_OpenComponentFully,DESIGN,WAVE,DELAY
2212.3,10306668,Alert message if Custom Symbol includes pattern,DESIGN,SKETCHER,PATTERN
2212.3,10320949,Master model Drawing not being copied over to new save-as file,NXMANAGER,FILE_SAVE_AS,NEW_ITEM
2212.3,10330402,Threads are hidden or have wrong position,DESIGN,FEATURE_MODEL,THREAD
2212.3,10349039,Replacing NX subassembly causes internal error,ASSEMBLIES,ARCHITECTURE,ALL
2212.3,10378219,"Unwanted update depending on initial load options, order of operations",DESIGN,WAVE,DELAY
2212.3,10378224,Weld Bead - Secondary Bead Face not selected,KDA,WELD_ASSISTANT,BEAD
2212.3,10393971,"License ""ug_isv_full"" is used but has not been needed for the desired Functional",CAM,TC_MFG,OTHER
2212.3,10394865,No Bitmap file output when creating Line Types for NX diagramming application,KDA,NX_DIAGRAMMING,TC_INTEGRATION
2212.3,10413807,"PMI Wave Linker fails with message ""dependent geometry is not in active referenc",PMI,WAVE,CORE
2212.3,10425437,Copy component operation not setting the selected reference set,ASSEMBLIES,ASSEMBLY_MODEL,COMP_ADD
2212.3,10445548,Ped Pro GTR TVP not trimmed correctly due to BLE Reference Line miscalculated,KDA,GENERAL_PACKAGE,PEDPRO
2212.3,10455056,Weld - Bad Performance Transform Mirror Bead in NX2206,KDA,WELD_ASSISTANT,TRANSFORM
2212.3,10456211,Mapped attributes reverting to previous values after Save in NX,NXMANAGER,ATTRIBUTES,MAPPING
2212.3,10460890,Performance problem in NX Integration,NXMANAGER,FILE_OPEN,PERFORMANCE
2212.3,10463481,NXOpen.View.Orient() API is hiding body faces in NX2206,ASSEMBLIES,ASSEMBLY_MODEL,COMP_REFLECT
2212.3,10470175,LINE TYPE DEFINITION IN NX DIAGRAMMING,KDA,SYMBOL_DESIGNER,DESIGN
2212.3,10470237,INTERNAL ERROR - DELETING COMPONENT,RSD_GENERAL,GENERAL,GENERAL
2212.3,10471358,Breaking connectivity when placing a flange,RSD_MECHANICAL,RUN_NAVIGATOR,GENERAL
2212.3,10471669,Initialize Project PDW failed in TC-managed-mode,KDA,PROGRESSIVE_DIE,ALL
2212.3,10471841,MBD rule: Get planar face data,DESIGN,ALGORITHMIC_MDL,NODES
2212.3,10472340,ADD ITEM REVISION PROPERTIES IN NXD TABLES,KDA,NX_DIAGRAMMING,DESIGN
2212.3,10472349,RUN updates brakes the logical fulfillment without any other message,RSD_MECHANICAL,RUN_NAVIGATOR,GENERAL
2212.3,10474068,Wave PMI linker - wrong output for Appended Text with expression in target part,PMI,WAVE,OTHER
2212.3,10476976,Automated testing sample parts,BETA_EAP,OTHER,ALL
2212.3,10477650,Punch Block Insert Clearance,KDA,PROGRESSIVE_DIE,PUNCH_INSERT
2212.3,10480559,PR10248194 is not fixed.,ROUTING_MECH,TOOLS,BEND_REPORT
2212.3,10483353,Need to limit Ship Structure Detailed Design strive to find source linked body,SHIP_DESIGN,MODELING,ALL
2212.3,10484040,Need to limit Ship Structure Detailed Design strive to find source linked body,SHIP_DESIGN,MODELING,ALL
2212.3,10486922,Require a utility to author Line-Types.,KDA,SYMBOL_DESIGNER,DESIGN
2212.3,10490022,PR - longer mesh creation time than before (from NX12 to 1980),CAE,ADV_SIMULATION,UPDATE_FEM
2212.3,10493154,"User Expression can not be changed in Part Navigator, if formula is used",DESIGN,EXPRESSION,ALL
2212.3,10493331,"Has Universal Connections and CONM2s, does export/import, mass value changes.",CAE,ADV_SIMULATION,CONNECTIONS_UNI
2212.3,10493446,Popup Type Classification attributes not showing Dropdown in Attributes panel in,KDA,NX_DIAGRAMMING,TC_INTEGRATION
2212.3,10494318,Ship Structure Basic Design - Create Hull - wrong face linked,SHIP_DESIGN,MODELING,ALL
2212.3,10495280,An invalid tag was passed to the tag module open drawing,ASSEMBLIES,UPDATESTRUCTURE,FULL
2212.3,10497517,Path of patterned path generated at the wrong place,ADD_FIXED_PLANE,BUILD_PROCESSOR,OTHER
2212.3,10497675,Setting Group in Feature Template Dialog should be collapsed by default,DESIGN,FEAT_TEMPLATE,MODELING
2212.3,10497818,Need arrangement functionality in MCD Player,MECHATRONICS,MISCELLANEOUS,ARRANGEMENT
2212.3,10500485,Information message is repeated twice,CAE,ADV_SIMULATION,FILE_OPERATIONS
2212.3,10501616,Legend is automatically selected,CAE,ADV_SIMULATION,POST_LEGEND
2212.3,10503084,"Difference in ""Show Result Flag"" behavior between NX11 and NX2206",KDA,VALIDATION,RUN_TEST
2212.3,10503139,Result Type in Result Variables always resets itself,CAE,ADV_SIMULATION,POST_RESULT
2212.3,10504551,Security Findings,CAE,ADV_SIMULATION,REPORT_WRITER
2212.3,10505946,Creation #109ANSA Quality Report Geometry check displays incorrect results/,CAE,ADV_SIMULATION,FE_ASSY_VRTICAL
2212.3,10507189,NX can't open an assembly,CAE,ADV_SIMULATION,UPDATE_SIM
2212.3,10507209,Weight calculation consolidated structure - double solid bodies,STRUCTURE_DES,DESIGN,CONSOLIDATE
2212.3,10508281,Creation #110CAD Quality Report-Geometry check displays incorrect results /,CAE,ADV_SIMULATION,FE_ASSY_VRTICAL
2212.3,10508545,Variable Axis Guiding Curves Ignore some Negative Stock or Offset,CAM,GUIDING_CURVE,VARIABLE_AXIS
2212.3,10508659,"""The given measure unit or measureRef is invalid"" by file open",GATEWAY,OPEN_NX_PART,KDA
2212.3,10513597,Area weighted RBE3 in 2212 EAP not giving correct results.,CAE,ADV_SIMULATION,MESH_1D
2212.3,10515212,CBUSHSOL103,CAE,ADV_SIMULATION,CONNECTIONS_UNI
2212.3,10515471,Wrong Averaged Stress in Work CSYS,CAE,ADV_SIMULATION,POST_RESULT
2212.3,10518326,Transmission loss is not output,CAE,ADV_SIMULATION,POST_PROBE
2212.3,10520372,Internal error moving Routing component with constraints,ASSEMBLIES,POSITIONING,CONSTRAINTS
2212.3,10520398,Motion Body unchecked - minimal loaded components are still visible,CAE,MOTION,FILE_OPERATIONS
2212.3,10520453,SpecDur - Surface Residual Stress: starting point of stress strain path,CAE,ADV_SIMULATION,DUR_SPEC_SOLV
2212.3,10520730,Append Merge -Group not imported,CAE,ADV_SIMULATION,ANSYS_IMPORT
2212.3,10520902,Motion solver slow performance to start the steps with multiple sphere to CAD,CAE,MOTION,SOLVER_LMS
2212.3,10521958,"Afm cannot be opened from TCSim, export also fails",CAE,ADV_SIMULATION,FILE_OPERATIONS
2212.3,10522593,NXOpen::NXColor::Label still returns ambiguous localized names in NX2206.7000,SYSENG,VISUALIZATION,COLOR_PALETTE
2212.3,10530063,Cannot edit User Expression with embedded formula in Part Navigator,DESIGN,EXPRESSION,ALL
2212.3,8613652,IFC export of an assembly from NX running in managed mode fails,TRANSLATOR,IFC,EXPORT
2212.3,8613965,"Incorrect mesh generated due to ""Stitch Edge"".",CAE,DES_SIMULATION,MESH_CONTROL
2212.3,8616128,Probe integral - Not able to get a value for existing probe,CAE,ADV_SIMULATION,POST_RESULT
2212.3,8616915,PR10248194 is not fixed.,ROUTING_MECH,TOOLS,BEND_REPORT
2212.3,9489164,"The result of assembly clearance differs if ""save interference geometry"" ON/OFF.",ASSEMBLIES,ASSEMBLY_MODEL,CLEAR_ANALYSIS
2212.3,9748045,Thread Milling Reports Wrong Gouge Motion,CAM,THREAD_MILL,OTHER
2212.3,9981684,Open part error-An operation was attempted on an invalid or unsuitable OM object,ASSEMBLIES,ASSEMBLY_MODEL,COMPONENT_ARRAY
2212.3,10021658,Animated Exploded Transform CSYS Does Not Place properly after initial creation,SYSENG,UI_CONSTRUCTORS,VECTOR
2212.3,10024869,Make Current Feature breaks Pocket Linked Body instances on Positioning Feature,ASSEMBLIES,ASSEMBLY_MODEL,COMP_PATTERN
2212.3,10036718,NXMGR: Assembly Open performance issues with many component patterns,ASSEMBLIES,POSITIONING,CONSTRAINTS
2212.3,10107362,Components which are suppressed not released even the arrangement is switched,ASSEMBLIES,ASSEMBLY_MODEL,COMP_SUPPRESS
2212.3,10229205,Change Item Revision Name in TC is not kept with save in NX.,NXMANAGER,ATTRIBUTES,MAPPING
2212.3,10251165,Ped Pro GTR TVP not trimmed out right,KDA,GENERAL_PACKAGE,PEDPRO
2212.3,10281215,Close Discovery Center default is not honored when a part opened from Teamcenter,SYSENG,UI_TOOLS,WELCOME_PAGE
2212.3,10305678,FeatureUpdate_during_OpenComponentFully,DESIGN,WAVE,DELAY
2212.3,10306668,Alert message if Custom Symbol includes pattern,DESIGN,SKETCHER,PATTERN
2212.3,10320949,Master model Drawing not being copied over to new save-as file,NXMANAGER,FILE_SAVE_AS,NEW_ITEM
2212.3,10330402,Threads are hidden or have wrong position,DESIGN,FEATURE_MODEL,THREAD
2212.3,10349039,Replacing NX subassembly causes internal error,ASSEMBLIES,ARCHITECTURE,ALL
2212.3,10378219,"Unwanted update depending on initial load options, order of operations",DESIGN,WAVE,DELAY
2212.3,10378224,Weld Bead - Secondary Bead Face not selected,KDA,WELD_ASSISTANT,BEAD
2212.3,10393971,"License ""ug_isv_full"" is used but has not been needed for the desired Functional",CAM,TC_MFG,OTHER
2212.3,10394865,No Bitmap file output when creating Line Types for NX diagramming application,KDA,NX_DIAGRAMMING,TC_INTEGRATION
2212.3,10413807,"PMI Wave Linker fails with message ""dependent geometry is not in active referenc",PMI,WAVE,CORE
2212.3,10425437,Copy component operation not setting the selected reference set,ASSEMBLIES,ASSEMBLY_MODEL,COMP_ADD
2212.3,10445548,Ped Pro GTR TVP not trimmed correctly due to BLE Reference Line miscalculated,KDA,GENERAL_PACKAGE,PEDPRO
2212.3,10455056,Weld - Bad Performance Transform Mirror Bead in NX2206,KDA,WELD_ASSISTANT,TRANSFORM
2212.3,10456211,Mapped attributes reverting to previous values after Save in NX,NXMANAGER,ATTRIBUTES,MAPPING
2212.3,10460890,Performance problem in NX Integration,NXMANAGER,FILE_OPEN,PERFORMANCE
2212.3,10463481,NXOpen.View.Orient() API is hiding body faces in NX2206,ASSEMBLIES,ASSEMBLY_MODEL,COMP_REFLECT
2212.3,10470175,LINE TYPE DEFINITION IN NX DIAGRAMMING,KDA,SYMBOL_DESIGNER,DESIGN
2212.3,10470237,INTERNAL ERROR - DELETING COMPONENT,RSD_GENERAL,GENERAL,GENERAL
2212.3,10471358,Breaking connectivity when placing a flange,RSD_MECHANICAL,RUN_NAVIGATOR,GENERAL
2212.3,10471669,Initialize Project PDW failed in TC-managed-mode,KDA,PROGRESSIVE_DIE,ALL
2212.3,10471841,MBD rule: Get planar face data,DESIGN,ALGORITHMIC_MDL,NODES
2212.3,10472340,ADD ITEM REVISION PROPERTIES IN NXD TABLES,KDA,NX_DIAGRAMMING,DESIGN
2212.3,10472349,RUN updates brakes the logical fulfillment without any other message,RSD_MECHANICAL,RUN_NAVIGATOR,GENERAL
2212.3,10474068,Wave PMI linker - wrong output for Appended Text with expression in target part,PMI,WAVE,OTHER
2212.3,10476976,Automated testing sample parts,BETA_EAP,OTHER,ALL
2212.3,10477650,Punch Block Insert Clearance,KDA,PROGRESSIVE_DIE,PUNCH_INSERT
2212.3,10480559,PR10248194 is not fixed.,ROUTING_MECH,TOOLS,BEND_REPORT
2212.3,10483353,Need to limit Ship Structure Detailed Design strive to find source linked body,SHIP_DESIGN,MODELING,ALL
2212.3,10484040,Need to limit Ship Structure Detailed Design strive to find source linked body,SHIP_DESIGN,MODELING,ALL
2212.3,10486922,Require a utility to author Line-Types.,KDA,SYMBOL_DESIGNER,DESIGN
2212.3,10490022,PR - longer mesh creation time than before (from NX12 to 1980),CAE,ADV_SIMULATION,UPDATE_FEM
2212.3,10493154,"User Expression can not be changed in Part Navigator, if formula is used",DESIGN,EXPRESSION,ALL
2212.3,10493331,"Has Universal Connections and CONM2s, does export/import, mass value changes.",CAE,ADV_SIMULATION,CONNECTIONS_UNI
2212.3,10493446,Popup Type Classification attributes not showing Dropdown in Attributes panel in,KDA,NX_DIAGRAMMING,TC_INTEGRATION
2212.3,10494318,Ship Structure Basic Design - Create Hull - wrong face linked,SHIP_DESIGN,MODELING,ALL
2212.3,10495280,An invalid tag was passed to the tag module open drawing,ASSEMBLIES,UPDATESTRUCTURE,FULL
2212.3,10497517,Path of patterned path generated at the wrong place,ADD_FIXED_PLANE,BUILD_PROCESSOR,OTHER
2212.3,10497675,Setting Group in Feature Template Dialog should be collapsed by default,DESIGN,FEAT_TEMPLATE,MODELING
2212.3,10497818,Need arrangement functionality in MCD Player,MECHATRONICS,MISCELLANEOUS,ARRANGEMENT
2212.3,10500485,Information message is repeated twice,CAE,ADV_SIMULATION,FILE_OPERATIONS
2212.3,10501616,Legend is automatically selected,CAE,ADV_SIMULATION,POST_LEGEND
2212.3,10503084,"Difference in ""Show Result Flag"" behavior between NX11 and NX2206",KDA,VALIDATION,RUN_TEST
2212.3,10503139,Result Type in Result Variables always resets itself,CAE,ADV_SIMULATION,POST_RESULT
2212.3,10504551,Security Findings,CAE,ADV_SIMULATION,REPORT_WRITER
2212.3,10505946,Creation #109ANSA Quality Report Geometry check displays incorrect results/,CAE,ADV_SIMULATION,FE_ASSY_VRTICAL
2212.3,10507189,NX can't open an assembly,CAE,ADV_SIMULATION,UPDATE_SIM
2212.3,10507209,Weight calculation consolidated structure - double solid bodies,STRUCTURE_DES,DESIGN,CONSOLIDATE
2212.3,10508281,Creation #110CAD Quality Report-Geometry check displays incorrect results /,CAE,ADV_SIMULATION,FE_ASSY_VRTICAL
2212.3,10508545,Variable Axis Guiding Curves Ignore some Negative Stock or Offset,CAM,GUIDING_CURVE,VARIABLE_AXIS
2212.3,10508659,"""The given measure unit or measureRef is invalid"" by file open",GATEWAY,OPEN_NX_PART,KDA
2212.3,10513597,Area weighted RBE3 in 2212 EAP not giving correct results.,CAE,ADV_SIMULATION,MESH_1D
2212.3,10515212,CBUSHSOL103,CAE,ADV_SIMULATION,CONNECTIONS_UNI
2212.3,10515471,Wrong Averaged Stress in Work CSYS,CAE,ADV_SIMULATION,POST_RESULT
2212.3,10518326,Transmission loss is not output,CAE,ADV_SIMULATION,POST_PROBE
2212.3,10520372,Internal error moving Routing component with constraints,ASSEMBLIES,POSITIONING,CONSTRAINTS
2212.3,10520398,Motion Body unchecked - minimal loaded components are still visible,CAE,MOTION,FILE_OPERATIONS
2212.3,10520453,SpecDur - Surface Residual Stress: starting point of stress strain path,CAE,ADV_SIMULATION,DUR_SPEC_SOLV
2212.3,10520730,Append Merge -Group not imported,CAE,ADV_SIMULATION,ANSYS_IMPORT
2212.3,10520902,Motion solver slow performance to start the steps with multiple sphere to CAD,CAE,MOTION,SOLVER_LMS
2212.3,10521958,"Afm cannot be opened from TCSim, export also fails",CAE,ADV_SIMULATION,FILE_OPERATIONS
2212.3,10522593,NXOpen::NXColor::Label still returns ambiguous localized names in NX2206.7000,SYSENG,VISUALIZATION,COLOR_PALETTE
2212.3,10530063,Cannot edit User Expression with embedded formula in Part Navigator,DESIGN,EXPRESSION,ALL
Siemens NX 2212 Build 3001 (NX 2212 Series)
Siemens NX’s continuous release strategy is what we are providing, to bring you the latest and greatest every six months. We are striving to consistently deliver value to you and enhance productivity and user experience across Siemens NX. Innovating new technology and capabilities is only part of our arsenal. We also continue to revolutionize our existing capabilities to ensure that we provide the maximum level of efficiency and ultimate user-experience for you, our customers. Siemens is the first CAD/CAM/CAE software company to offer a continuous release model. With NX Continuous Release, upgrading is fast, automated, and seamless.
Experience NX Continuous Release
Siemens Digital Industries Software is a leading global provider of product life cycle management (PLM) software and services with 7 million licensed seats and 71,000 customers worldwide. Headquartered in Plano, Texas, Siemens Digital Industries Software works collaboratively with companies to deliver open solutions that help them turn more ideas into successful products.
Product: Siemens NX Continuous Release
Version: NX 2212 Build 3001 (NX 2212 Series)
Supported Architectures: x64
Website Home Page : www.plm.automation.siemens.com
Languages Supported: multilanguage
System Requirements: Windows *
Size: 15.3 Gb
* System Requirements:
Siemens NX 2212 Build 3001 (NX 2212 Series)
Files saved in NX-2212 Series (NX-2212 and above) cannot be opened in NX-2206 Series and lower versions of NX
NX version designation table after NX-12
NX-1847 Series: 1847-1851-1855-1859-1863-1867.xxxx
NX-1872 Series: 1872-1876-1880-1884-1888-1892.xxxx
NX-1899 Series: 1899-1903-1907-1911-1915-1919.xxxx
NX-1926 Series: 1926-1930-1934-1938-1942-1946.xxxx
NX-1953 Series: 1953-1957-1961-1965-1969-1973.xxxx
NX-1980 Series: 1980-1984-1988-1992-1996-2000.xxxx
NX-2007 Series: 2007-2008-2011-2015-2019-2023-2027.xxxx
NX-2206 Series: 2206.xxxx
NX-2212 Series: 2212.xxxx
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
![Siemens NX 2212 Build 3001 (NX 2212 Series)]()
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
Siemens NX 2212 Build 3001 (NX 2212 Series)
